20 Most Recent Harman Kardon HK 3380 Receiver - Page 3 Questions & Answers

turn the sub upsidedown, carefully remove the clear rubber feet (these are a dome fitted over a mushroom top), using the toothed gripper cutout of a pair of pliers (when closed it is the eye shaped opening visible on one side), grip the mushroom firmly but not so hard as to crush the mushroom and gently ease clockwise and anticlockwise (the mushroom is at one end of a clear plug blocking access to the four screws that hold the two parts together. Be carefull to use the correct size screwdriver so as not to damage the screw heads as they are tight. On reassembly, you may need to use glue to replace the rubber feet if the mushroom becames damages during removal.

Here is the link for the manual.

Is there a MUTE function or Tape Monitor function that is turned on? If so , turn off

Can you post an image of the back of the receiver? As the previous answer said, you will probably have to use the R,G,B, Phono connectors on the rear of the TV. You can also get adapters that can allow you to use phono leads to a scart connector on the rear of the TV.

Hi Ricky Rae, indicates the harman kardon model you are commenting on, in order to find the best possible solution It may be that you have no output due to a malfunction of the power stage I wait your answer Greetings Franco Dosil Hola Ricky Rae, indica modelo del Harman Kardon que estas comentando, para poder encontrar la mejor soluci?n posible Puede ser que que no tengas salida por un mal funcionamiento de la etapa de potencia Espero tu respuesta Saludos Franco Dosil

Crutchfield.com can accommodate your needs

depends on the connector types and what type of wireless signal have you asked Harman Kardon?

Hello Babak, I sent you the link where you can see online the service manual of Harman Kardon Aura Studio, if you subscribe, paying you can download it directly Greetings Franco Dosil Hola Babak, te env?o el link de donde puedes ver en linea el manual de servicio del Harman Kardon Aura Studio, si te suscribes, pagando puedes descargarlo directamente Saludos Franco Dosil https://servlib.com/harman-kardon/audio/aura-sm8.html

Hello Pramod, ask, through which connection did you connect the TV to the BDS-5, for the HDMI, fiber optic or coaxial? I suggest you disconnect all equipment connected to the Harman Kardon, also the speakers Disconnect the BDS-5 from the power outlet, wait half an hour and reconnect it to the power outlet Then connect the speakers one by one, play a CD or the radio and test if they work, if so, reconnect all the speakers and control the operation Then, try a different cable than the one you used in the first connection of the TV and check the operation If you have no results, contact the Harman Kardon representative I hope you can solve the problem Greetings Franco Dosil Hola Pramod, pregunta, a trav?s de que conexi?n, conectaste el TV al BDS-5, por el HDMI, fibra ?ptica o coaxial? Te sugiero que desconectes todos los equipos conectados al Harman Kardon, tambi?n los parlantes Desconecta al BDS-5 del toma corriente, espera media hora y vuelve a conectarlo al toma corriente Luego conecta los parlantes de a uno, reproduce un CD o con la radio y prueba si funcionan, si es as?, reconecta nuevamente todos los parlantes y controla el funcionamiento Luego, prueba con otro cable distinto al que usaste en la primera conexi?n del televisor y comprueba el funcionamiento Si no tienes resultados, ponte en contacto con el representante de Harman Kardon Espero que puedas resolver el problema Saludos Franco Dosil https://www.harmankardon.com/

Hello Terry, so you count, you should check on the back panel of your HK3370, the jumpers that are between the Main In and Pre Out connectors, remove them, clean them and replace them These bridges interconnect the preamplifier stage, with the amplifier stage I sent you the link of the service manual On the other hand, check the connectors of each sound source I hope you can solve the problem Greetings Franco Dosil Hola Terry, por lo que cuentas, deberias revisar en el panel posterior de tu HK3370, los puentes que estan entre los conectores de Main In y Pre Out, retiralos, limpialos y vuelve a colocarlos Estos puentes interconectan la etapa preamplificadora, con la etapa amplificadora Te envio el link del manual de servicio Por otro lado comprueba los conectores de cada fuente de sonido Espero puedas resolver el problema Saludos Franco Dosil https://data2.manualslib.com/pdf3/69/6859/685825-harman_kardon/hk3370.pdf?1221b5ae822e57c2caca7bc86c5e0f6f&take=binary

Hello Lars, check that the remote control of the Harman Kardon, is not failing, you may have some key locked or leaking and that will produce the volume increase, to check if it is the remote control, keep it in a drawer or box while you are in the listening session, if the fault is repeated, then the remote is not the culprit and you could have a problem in the function system of Harman Kardon Hola Lars, comprueba que el control remoto del Harman Kardon, no este fallando, puede que tenga alguna tecla trabada o con fugas y eso produzca el incremento de volumen, para comprobar si es el control remoto, gu?rdalo en un caj?n o caja mientras estas en la sesi?n de escucha, si la falla se repite, entonces el remoto no es el culpable y podr?as tener un problema en el sistema de funciones del Harman Kardon

Take the panel off and replace the bulb, it's simple to say, but not hard to do!

Many time they are dirty inside. Look for screws first, but normally you will have to pry it open. There will be a silicon flexible panel with small magnetic dots glued to it for each funcion. The ridged green board that it touches can be very dirty, and the magnets cant make the switching happen if they are. Its delicate, but can be done. Spray electronic cleaner usually does the trick

You can go online and find manual took about 7 seconds. Hint page 46 Bigger hint https://www.manualslib.com/manual/65710/Harman-Kardon-Avr-7000.html?page=46#manual

Hi Try this. To reset the AVR's processor: 1. Press the front-panel Standby/On switch for more than three seconds to turn the AVR off (the Power Indicator will turn amber). 2. Press and hold the front-panel Surround Modes button for at least 5 seconds until the RESET message appears on the front-panel Message Display. NOTE: After performing a processor reset, wait at least 1 minute before pressing any Source Selector buttons. Good Luck Happy to help