20 Most Recent
Canon EOS-3000N 35mm SLR Camera - Page 8 Questions & Answers
Canon eos1
According to the manual, this indicates either (1) the battery is low and needs to be replaced, or (2) the internal self test is failing when the shutter button is depressed half-way. For the latter condition, they recommend removing the battery completely, then reinserting and pressing the battery check button (second button down under the 'palm' door).
If you still get the blinking 'bc', it indicates the camera needs service.
11/19/2008 8:32:08 PM •
Canon...
•
Answered
on Nov 19, 2008
I do not know how to set date on my Canon IXUS 111 camera purchase date 17.05.05
THIS ONE WAS A REAL PAIN! THEY HAD IT WELL HIDDEN, BUT I WAS ALBE TO LOCATE IT FOR YOU. THE FIRST THING YOU'RE GOING TO SEE IS A CANON SD600 AND GO WHAT???, BUT BELIEVE ME THIS IS ON THE RIGHT PAGE. ACCORDING TO CANON THIS IS THE PAGE AND INFO THEY USE TO ANSWER THIS PROBLEM BECAUSE IT FITS FOR MOST OF THEIR SYSTEMS! GO FIGURE! BUT THEY SAY THIS WILL WORK SO I'M PASSING THIS ALONG TO YOU IN GOOD FAITH AND HOPING LIKE HECK THAT IT DOES THE TRICK FOR YOU! THAT IS MY MAIN CONCERN, TO GET YOU BACK UP SHOOTING PHOTO'S AGAIN! I HAVE A VERY LONG HOT LINK FOR YOU THAT WILL TAKE YOU DIRECTLY TO THE MANUAL AND ON PAGE 16, YOU WILL FIND INFORMATION ON SETTING THE TIME AND THE DATE ON YOUR CAMERA. ALL I CAN SAY IS GOOD LUCK! AND IF IT DOES THE TRICK, DON'T FORGET TO VOTE ON THIS SOLUTION. THANKS! IF YOU NEED MORE HELP, REPLY TO ARCLIGHT1217.
http://www.ocad.ca/Assets/PDF_MEDIA/AV+$!26+Imaging+services/manuals/Canon+Powershot+SD-600+cam-Windows
THERE IT IS AND IT'S A BIG ONE AND I HOPE IT DOES THE TRICK FOR YOU! GOOD LUCK! REMEMBER, PAGE 16 AND IT STARTS OUT TALKING ABOUT USING THE CLOCK, BUT JUST READ THE FINE PRINT AND YOU'LL FIND THE DATE THROWN IN ALSO!
ARCLIGHT1217
11/13/2008 7:47:25 AM •
Canon...
•
Answered
on Nov 13, 2008
Film won't load on Vectis 300 MinoIta
The clue is in your descrition; Old.
If the mechanism has jammed, due to age or lack of use that causes tarnisg=hing on the contacts, the motor/mechanism will not load.
I would get it serviced at an aurgorised Minolta repair shop.
Contact Minolta for a list of authorised repairers.
3/22/2024 7:04:40 AM •
Photography
•
Answered
on Mar 22, 2024
I tried to use a 16GB PNYcard in my picture fram and it would not work. It said "No Card" on the screen. What's the answer?
If your picture frame is not recognizing the 16GB PNY card and displaying a "No Card" message, there could be several reasons for this issue:
- Compatibility: Some picture frames may have limitations on the size or type of memory card they can accept. Ensure that the picture frame is compatible with SDHC or SDXC cards, as these are the types commonly used for higher-capacity cards like 16GB.
- File System: Check if the memory card is formatted in a compatible file system such as FAT32 or exFAT. Some picture frames may not recognize cards formatted in other file systems. You may need to format the card using a compatible file system on your computer before using it in the picture frame.
- Card Reader Slot: Ensure that the memory card is inserted correctly into the card reader slot of the picture frame. Sometimes, improper insertion can prevent the device from detecting the card.
- Card Compatibility: While SDHC and SDXC cards are generally backward-compatible with devices that support SD cards, some older picture frames may have limited compatibility with higher-capacity SD cards. Try using a lower-capacity SD card (e.g., 2GB or 4GB) to see if the picture frame recognizes it.
- Faulty Card or Picture Frame: If none of the above solutions work, there may be an issue with either the memory card or the picture frame itself. Try using the memory card in a different device to check if it's functioning correctly. Similarly, try using a different memory card in the picture frame to see if it's able to recognize it. If the problem persists, there may be a hardware issue with either the card or the picture frame, and you may need to contact the manufacturer for assistance or consider replacing the faulty component.
By following these troubleshooting steps, you should be able to determine the cause of the issue and resolve it accordingly.
3/16/2024 9:30:07 AM •
Photography
•
Answered
on Mar 16, 2024
Need OptiPix Pro software
I own the OptiPix DPF and here is a pic of the owners manual with directions for the OptPixsetup file.
11/25/2023 1:11:02 AM •
Photography
•
Answered
on Nov 25, 2023
Driver for target australia film scanner f100
I own the Target AU F100 film scanner and have the original CD. It has a Driver directory on it, which includes DriverInstaller app and 32 and 64 bit subdirectories. It installed recently on my Win 10 64 bit PC and worked ok, despite being Win XP/Vista software vintage 2010.
6/14/2023 3:09:06 AM •
Photography
•
Answered
on Jun 14, 2023
Not finding what you are looking for?