20 Most Recent GE 98669 Easycam Pro Webcam - Page 9 Questions & Answers

make sure your kithen ground fault detector has not poped closed. Push the red button to activate it.

You need to install the radio receiver to the computer via usb. then sync the devices. Usually a button on the receiver or mouse should do it.

You might want to check it from the link that I will provide below. There are several drivers that will work for your device for sure.
Just click the link. Driverdownload

Here is one. It's for the Simon XT but I believe it also applies to Deluxe Wireless.
http://www.devconsecurity.com/pdf/GE%20SimonXT%20User%20Manual.pdf

you cant get a screen??

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them they might be faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electical extensions even something as small as an electrical fan and its lead can cause this problem or just replace them they could be faulty a computer needs all electrical power and data to continue through every working device and to have an end so any faulty leads will end up with a computer error

make sure your graphics card is securely seated with no dust built up or in the socket

if i have misunderstood or you need more help with this post a reply

hope this helps you

Temporarily that is a good solution. Get on the internet and download the driver for the wireless keyboard.

download the drive with your internet..
write type of your webcam and go to the website of webcam..

Here is the user manual for you: http://www.securtek.com/products-services/system-user-guides/ge/GE%20SimonXT%20User%20Manual.pdf . Answers are found on pg 31-32. Go to Section heading entitled "Access codes" (shown in blue). It then walks you through changing the Master Code, User Codes 1 to 8, and the Duress code. Not sure which code you are looking for but the steps for each code are pretty simple. Hope this helps.

Please tell me whats the make and model of the motherboard. The error code beeps are specific for a make of the motherboard

I'm sorry but this is a Hoax. On a PC I was able to download the file by clicking the request ticket button and then the download button. The file is a .jpg which should be an indicator that it is a Scam. A normal company would never use a .jpg image as a official document.
Upon reading the file it is clear it is a scam. For an interview they are requesting you donate over $8000 cash.
Sorry but this is a scam.
I was able to download the file and scan for viruses. Here is the file:

Please supply more information, so that a good answer to your problem can be produced.

hi martin,
this link should take you to a pdf document which will hopefully cover your model number:
cheers Iain

http://europe.asrock.com/manual/GE%20PRO-M.pdf

you need to turn the number lock on. if it doesn't work just by pressing the button once, then you need to press and hold the function (fn) key while you press the num lock key.

..try to connect another computer or check the battery...you must meet the System Requirements:. Microsoft Windows 2000, XP, Vista or 7. PC with a 1 GHz processor or higher. 512 MB of Ram. One USB port.