20 Most Recent Canon EOS-10D Digital Camera - Page 6 Questions & Answers

0helpful
1answer

My canon mv940 digital camcorder isnt charging

If your Canon MV940 digital camcorder is not charging, it could be caused by a few different issues:
  1. Check the battery: Make sure the battery is not damaged or worn out. If it has been unused for a few years, it may no longer hold a charge and need to be replaced.
  2. Check the charging port: Make sure the charging port is clean and free of debris. If it is dirty or damaged, it may not be able to charge the battery.
  3. Check the charger: Make sure the charger is working and not damaged. If it is not working, it may need to be replaced.
  4. Check the charging cable: Make sure the charging cable is not damaged or frayed. If it is, it may need to be replaced.
  5. Check the battery compartment: Make sure the battery compartment is clean and free of debris. If it is dirty or damaged, it may not be able to charge the battery.
  6. If none of the above steps work, it is possible that the camcorder has a more serious problem that requires professional service.
It is important to refer to the user manual or contact Canon technical support for further assistance and specific troubleshooting steps for your camcorder model. It is also important to make sure the camcorder is not plugged in before attempting any troubleshooting steps. Due to the age of the device, it might be hard to find a replacement battery for it and you might need to look for an alternative solution such as a third party battery replacement or an external power bank.
1/17/2023 7:09:28 PM • Canon Cameras • Answered on Jan 17, 2023
0helpful
1answer

Canon powershot sd 750 not turning on after few years of no use

Simplest answer is to replace the battery. If it hasn't been used or charged for so long the battery will be considered 'Old' so it will not hold charge. I think the higher quality brand name batteries for it are usually a reasonable price and not expensive.
1/8/2023 9:14:50 AM • Canon Cameras • Answered on Jan 08, 2023
0helpful
1answer

How do I improve the focus on a Canon S2 IS camera?

Hi, Please ensure that you clean the lens of your camera. Then, if you'd like the camera to be as it was when it was first provided to you, you can attempt a factory reset on it. If you're still not satisfied with the focus, then you can next move to add an external lens attachment in order to improve the camera's focus. Thank you.
12/28/2022 3:10:23 AM • Canon Cameras • Answered on Dec 28, 2022
0helpful
1answer

My Canon Powershot A2200 giving white screen and closing automatically?

Question edited for clarity. It sounds like the battery is flat or not holding a charge. Remove it and test the voltage with a multimeter. It should be 3.6 volts. https://www.google.com/search?q=canon+powershot+a2200+battery ..
12/25/2022 9:53:01 PM • Canon Cameras • Answered on Dec 25, 2022
0helpful
2answers

Lens stuck on canon ixy digital 930 is

Hi, please switch modes on your camera and check if the lens goes back in. If not, please use the zoom option to out and check if the lens begins to retract back into it's default position. Otherwise, you can restart the camera 2 or 3 times in a row to attempt to overcome the issue. Thank you.
11/29/2022 10:25:31 PM • Canon Cameras • Answered on Nov 29, 2022
0helpful
2answers

I have a Canon ISUS 177 Camera - help please with symbols

Hi, The symbol with the moon/stars should relate to taking night-time pictures. The lightening symbol stands for flash (ie light shown when photo is taken). The delay should be due to the flash taking time to charge up prior to the photo. Thank you.
11/22/2022 4:59:23 PM • Canon Cameras • Answered on Nov 22, 2022
0helpful
1answer

Canon 760d no power DC Powerboard troubleshooting

One video that might help, but this is a $500 camera, so take it in for service. It needs to be serviced in a clean dust free lab by men in white coats and cotton gloves. https://www.google.com/search?q=Canon+760d+no+power ...
11/19/2022 4:39:37 PM • Canon Cameras • Answered on Nov 19, 2022
0helpful
1answer

Cannon film camera broken

There is an internal battery that you cannot change. When it goes out, the camera fails. There are several places online that you can send it to for repair
10/26/2022 1:45:02 PM • Canon Cameras • Answered on Oct 26, 2022
0helpful
1answer

Canon powershot lens zoom extended won't retract

The lens is normally retracted for safety about one minute after you press the button in Shooting mode . To have the lens retracted immediately after you press the button, set the retraction timing to [0 sec.].Choose [Lens Retract], and then choose [0 sec.].
7/28/2022 9:49:26 AM • Canon Cameras • Answered on Jul 28, 2022
0helpful
1answer

EOS Rebel XT. How can I install on my laptop?

https://youtu.be/KvXEtKaWsME, I'm sure this link will be helpful
7/28/2022 9:47:41 AM • Canon Cameras • Answered on Jul 28, 2022
0helpful
1answer

Canon EOS1100D problems screen flickers and fails

Just put it all back together. Together no particular order put the lens back on uh put the camera uh battery. And scan disk back in and then see if it fires.
7/26/2022 9:18:58 AM • Canon Cameras • Answered on Jul 26, 2022
0helpful
1answer

My canon ixus 65 is working but cannot take a photo when i take a photo theres only blinking red camera on the bottom. How will i fix this pls?

Firstly check if your SD card is not full yet, secondly from your settings deactivate the flash and try to snap with flash off and thirdly you can reset the camera.
I hope this can help you fix it.
5/24/2022 6:46:43 AM • Canon Cameras • Answered on May 24, 2022
0helpful
1answer
0helpful
1answer

Canon PowerShot A530 camera. Format isn't an option on my camera.

Question edited for clarity. Your memory card is too big and beyond the capabilities of the camera. 512Mb is recommended. Page 34 of the manual http://gdlp01.c-wss.com/gds/8/0900001188/01/PSA540_530CUGad-EN.pdf ..
4/26/2022 5:22:42 AM • Canon Cameras • Answered on Apr 26, 2022
0helpful
2answers

Can an Olympus OM type ring flash be used on my Canon 7D? If not directly, how can if be used? (I want to use my Olympus ring flash / cross polarization filter setup).

Question edited for clarity. Yes it can, although it won't work by metering the light that is hitting the CMOS sensor. You will use it in manual mode.
4/17/2022 5:39:57 PM • Canon Cameras • Answered on Apr 17, 2022
0helpful
2answers

Canon 70-200 is ii at problem

Connection to body or battery voltage.
4/11/2022 12:00:29 PM • Canon Cameras • Answered on Apr 11, 2022
0helpful
1answer

It's REALLY hard to press down the button to take a photo. Is it possible that the battery is dying?

Yes it is possible that the battery is getting weak. Or the button which is of course a switch needs cleaning with electrical contact spray.
3/23/2022 5:12:10 AM • Canon Cameras • Answered on Mar 23, 2022
0helpful
2answers

Hi. How do I reset a Canon Ixus 80 IS please?

Question edited for clarity. Question move from Computers to Canon Camera. There is no 'Reset' only Reset Camera to Defaults. The most likely reason is completely flat batteries. https://www.manualslib.com/manual/355860/Canon-Ixus-80-Is.html?page=177 ..
2/28/2022 2:26:42 PM • Canon Cameras • Answered on Feb 28, 2022
Not finding what you are looking for?
Canon EOS-10D Digital Camera Logo

58 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2417 Answers

David Shaub

Level 3 Expert

2994 Answers

shadow

Level 3 Expert

490 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Eos Canon

  • Eos Canon

Most Popular Question

canon 10d will not power need

  • Cameras
Loading...