Top 20 LifeView LifeTV (720661115) TV Input Questions & Answers

you probably have to try flytv prime only and the drivers for vista (which usually may work also in win7 systems, as there does not seem to be any specifical to your flytv prime spo yet avaliable from the manufacturer.

it's an alternative that can be worth to try. find it here

if this does not work you may have to upgrade your device to a known supported win7 compatible device.

LifeView LifeTV... | 477 views | 0 helpful votes

download the factory defaults and reload them into it then upload your new fix back in to it

LifeView... | 113 views | 1 helpful votes

Check along the bottom toward either end. There you will find a led and scroll/select button. Press the middle button. Green is on Red is standby. No led lit, no power.




Televison &... | 69 views | 0 helpful votes

It is possible that the remote control has failed and even new batteries can't revive it.

Televison &... | 64 views | 0 helpful votes

1. Open fuse
2. Defective power switch
3. Defective remote control

Televison &... | 64 views | 0 helpful votes

The code would be found in a compatible remote control.

Televison &... | 62 views | 0 helpful votes

If the replacement batteries were known to be good and installed correctly, the next thing to be done is replacement of the remote control.

Televison &... | 28 views | 1 helpful votes

devices buffering are always due to the strength or quality of whatever is supplying the internet signal. Run the free app from the device, and then run it again from a phone near to the router or a computer connected directly. Compare all the data, and then complain to your Internet Service Provider.

Televison &... | 41 views | 0 helpful votes

The following Astron LED 32 TV was advertised with built-in Netflix capability.

Changes in Netflix rendered current software versions incompatible with older sets. And here is a reference regard some 2010-2011 Samsungs being incompatible:

If your Astron's support is unavailable, an alternative is to try casting from your mobile device to the TV.

Televison &... | 47 views | 0 helpful votes

The drive may have failed.

Televison &... | 65 views | 0 helpful votes

First, make sure that the source is set to TV. (Use the TV button at the top left of the remote to ensure that the TV is being controlled by the remote. The Source button is the one to the right of the Power button on the remote. It's the top button on the side of the TV. ) Next press Menu. (On the remote, it's the button to the upper left of the arrow keys. It's the second button from the top on the TV side panel.) Use the Up/Down arrow keys to navigate to Channel. Press Enter. (Note: the channel buttons at the bottom of the side panel buttons match the Up/Down arrows of the remote. The Source button on the TV is the Enter key.) Press Enter again and use the Up/Down arrow keys to highlight your country. Press Enter. Navigate to Auto Store and press Enter twice. Wait for the TV to go through the channels and test for signal.

You can also add channels manually by using the Manual Store option. If you know the channel number, you would then choose Channel and select C (over-the-air) or S (cable) and then the Right arrow key. Use the arrow keys to highlight the desired channel. Press Enter. Use the arrow keys to select Store and press Enter again. Otherwise choose Search. Use the Up/Down arrows to select a channel. Press Enter, go to Store and press Enter again. Repeat this for each channel.

The manual for the LE26R73BD is available on the support page: . The current link to the manual is

I hope this helps. If you use a set top box with a non-RF coaxial cable output to the TV, the channel option will not be available.

Cindy Wells

Televison &... | 60 views | 0 helpful votes

Probably the power supply needs to be replaced. "Resetting" is unlikely to work.

Televison &... | 57 views | 0 helpful votes

A modern digital tv is as much computer as tv and consequently has much circuitry that is highly vulnerable to voltage surges and transients and while the sort of surge protector you use with your computer would offer some protection from mains borne nasties, if an outside antenna is used an additional pathway for damage is provided that is impossible to protect from short of disconnecting whenever a storm is likely. A lightning strike isn't necessary to cause damage to sensitive circuitry.

You might be lucky, although it is unlikely to be a fuse, it could be or it could be an easy repair, though in my fairly limited experience the tv is unlikely ever to be quite the same ever again...

Televison &... | 23 views | 1 helpful votes

All universal remote controls do not handle all device functions.

Televison &... | 53 views | 0 helpful votes

Not finding what you are looking for?
LifeView LifeTV (720661115) TV Input Logo

Popular Tags

3 questions posted

Ask a Question

Usually answered in minutes!

Top LifeView Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Cindy Wells

Level 3 Expert

6164 Answers


Level 3 Expert

85239 Answers

Are you a LifeView Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LifeView Televison & Video

  • LifeView Televison & Video

Most Popular Question

need driver windows 7

  • Televison & Video