Top 20 LifeView CapView (7201650115) Video Capture Questions & Answers


Hi, Try this trick to get around Microsofts silly habits. [We all have come across them somewhere] Open "my documents" create a new file, name it to suit your video, plug your camera/player in and run the video into the created file. Then simply send the file as an attachment in an email. Ensure you tell the person you send it to exactly which program you used, so when they open it window's does not get confused. This can be done from MS PowerPoint/ MS Office and several others. Goodluck. mistyman

LifeView CapView... | 52 views | 0 helpful votes


download the factory defaults and reload them into it then upload your new fix back in to it

LifeView... | 113 views | 1 helpful votes


It's a budget-friendly product adjust by using an internet connection you can convert your Tv into your favourite entertainment player with all the channels
available. Plus, it lets you watch and stream movies, TV shows, photos, and music from your personal collection too. For Roku tv setup and Roku Activation code with
Roku com/link creates an account.

https://www.tvsetuponline.com/

Televison &... | 22 views | 0 helpful votes


Check along the bottom toward either end. There you will find a led and scroll/select button. Press the middle button. Green is on Red is standby. No led lit, no power.

25c5fa04-e561-40fd-8b61-4b57b5a145f4.png


pic2-s1urlp32hjhaffldq12bd5wk-6-2.png


25c5fa04-e561-40fd-8b61-4b57b5a145f4.png

Televison &... | 69 views | 0 helpful votes


Clearly the dvd unit is reading the discs and processing the data ok for it to record on the tape without problem, therefore the problem is either the interface between the tv and the player or a mismatch of signal or signal type between the tv and player.

I am wondering if you have tried a different tv, in particular one of a similar vintage to the player?
How are you connecting the unit and the tv? The usual way and the best way is using a scart lead but the scart system that takes a good analogue signal straight into the sound and video sections of the tv has been going out of fashion for a couple of decades and modern tv sets are accepting only digital inputs, rendering a great deal of useful older equipment useless.

Digital to analogue and analogue to digital converters are available at many prices but I don't know how successful they are.

Televison &... | 15 views | 0 helpful votes


You go to the manufacturer's website. So go to technika.com and upload the firmware update onto a USB stick. Then plug the USB into the Tv and the firmware update should run.

Televison &... | 15 views | 0 helpful votes


What make of TV is it? Most televisions will have a small set of buttons on the side or edge of the Tv.

Televison &... | 16 views | 1 helpful votes


Which TV do you have? Your TV might have an 'Optical' audio out. You'll need a specialist cable to do this. These cables are usually cheap to buy and easy to get a hold of. Connect the cable to the 'Optical' Out on the back of the TV and the other end into the 'OPT' port in the back of the sound bar. This should mean you can use the HDMi port for your firestick.
The cable's plug only fits in one way around so be careful fitting it. Your sound-bar might have a small protector peg in the hole you'll need to remove first.
Usually, any sound played through the TV will play through the optical cable so it will play through the sound-bar.

Televison &... | 15 views | 0 helpful votes


The following Astron LED 32 TV was advertised with built-in Netflix capability. https://shopee.ph/ASTRON-LED-32-TV-(brandnew)-i.118118557.4007371447

Changes in Netflix rendered current software versions incompatible with older sets. And here is a reference regard some 2010-2011 Samsungs being incompatible: https://www.bbc.com/news/technology-50331667

If your Astron's support is unavailable, an alternative is to try casting from your mobile device to the TV. https://help.netflix.com/en/node/49

https://www.astronelectronics.com.au/

Televison &... | 50 views | 0 helpful votes


Have you done the 2 year course and do you have the thousands of dollars of test equipment, meters, oscilloscopes, IC Logic testers and that sort of thing?

Have a read. I wrote this recently

https://www.fixya.com/support/r29790007-repairing_own_television

..

Televison &... | 14 views | 0 helpful votes


First check that the source or input is set to TV (RF) port. Some TVs only have the Source/Input button on the original remote. Others have one among the front panel buttons. If this button isn't on the TV itself and you have an universal remote, you may need to try multiple codes to get the Input/Source button to work properly. Getting the power button to work is often easier.

I hope this helps. Every TV that I've used only displayed the Channel Search when the input was TV. It could be in a Setup menu, under Initial Settings or a Channel menu. Please add a comment with the make and model of the TV for more information on where to find the Input/Source button and the Menu location to for searching for channels. (Note: there was a brief period of HD monitors that were sold as HD-ready TVs. However these units didn't have a tuner. They were meant to be used with a set-top (satellite dish receiver, cable) box.)

Cindy Wells

Televison &... | 14 views | 0 helpful votes


First, make sure that the source is set to TV. (Use the TV button at the top left of the remote to ensure that the TV is being controlled by the remote. The Source button is the one to the right of the Power button on the remote. It's the top button on the side of the TV. ) Next press Menu. (On the remote, it's the button to the upper left of the arrow keys. It's the second button from the top on the TV side panel.) Use the Up/Down arrow keys to navigate to Channel. Press Enter. (Note: the channel buttons at the bottom of the side panel buttons match the Up/Down arrows of the remote. The Source button on the TV is the Enter key.) Press Enter again and use the Up/Down arrow keys to highlight your country. Press Enter. Navigate to Auto Store and press Enter twice. Wait for the TV to go through the channels and test for signal.

You can also add channels manually by using the Manual Store option. If you know the channel number, you would then choose Channel and select C (over-the-air) or S (cable) and then the Right arrow key. Use the arrow keys to highlight the desired channel. Press Enter. Use the arrow keys to select Store and press Enter again. Otherwise choose Search. Use the Up/Down arrows to select a channel. Press Enter, go to Store and press Enter again. Repeat this for each channel.

The manual for the LE26R73BD is available on the support page: https://www.samsung.com/uk/support/model/LE26R73BDX/FID/ . The current link to the manual is https://downloadcenter.samsung.com/content/UM/200603/20060325173246984_BN68-01007A-00Eng-0302.pdf.

I hope this helps. If you use a set top box with a non-RF coaxial cable output to the TV, the channel option will not be available.

Cindy Wells

Televison &... | 62 views | 0 helpful votes


check power settings if not set to go off in few minutes then bad power board

Televison &... | 16 views | 0 helpful votes


Hold down the menu button on the top or side of your TV for at least 10-15 seconds. An on screen menu will appear asking you to enter the time, date and location settings. Follow the onscreen instrucitons, and once completed your TV will reset to factory settings.

Televison &... | 13 views | 0 helpful votes


A modern digital tv is as much computer as tv and consequently has much circuitry that is highly vulnerable to voltage surges and transients and while the sort of surge protector you use with your computer would offer some protection from mains borne nasties, if an outside antenna is used an additional pathway for damage is provided that is impossible to protect from short of disconnecting whenever a storm is likely. A lightning strike isn't necessary to cause damage to sensitive circuitry.

You might be lucky, although it is unlikely to be a fuse, it could be or it could be an easy repair, though in my fairly limited experience the tv is unlikely ever to be quite the same ever again...

Televison &... | 24 views | 1 helpful votes


Tune the set-top box (not the TV) to an HD channel
Press CABLE then POWER on your remote to turn the set-top box OFF
Press the MENU or SETTINGS button on your remote to access the User Settings Menu
Make sure the OUTPUT is set to the correct HD TV format (720 or 1080)
Press CABLE then POWER on your remote to turn the set-top box ON

Televison &... | 13 views | 0 helpful votes


The SHOWTIME ANYTIME channel is accessible in the Roku Channel Store on all Roku devices. You can connect your Roku player with the SHOWTIME subscription after getting a code and then logging in with the username and password given by the TV provider on their computer.

Televison &... | 15 views | 0 helpful votes


check input or source if ok possible bad power board if voltage ok bad screen

Televison &... | 13 views | 0 helpful votes

Not finding what you are looking for?
LifeView CapView (7201650115) Video Capture Logo

Popular Tags

1 questions posted

Ask a Question

Usually answered in minutes!

Top LifeView Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Cindy Wells

Level 3 Expert

6187 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a LifeView Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LifeView Televison & Video

  • LifeView Televison & Video

Most Popular Question

could use some help

  • Televison & Video
Loading...