20 Most Recent
Canon Rebel XT / EOS 350D Digital Camera - Page 2 Questions & Answers
Canon EOS 350D Driver Windows 7
You need to change the camera's USB connection mode from "PC" to "Print/PTP" in camera setting menu. After that it should be recognized by Windows 7 without drivers.
Canon ds6041 dc 8.1v eos rebel
All canon drivers and software can be downloaded from canon official sites.
https://www.usa.canon.com/cusa/support/drivers
What does eps mean
it's a type of file. Full out it means Encapsulated PostScript. EPSfiles have 1 page normally, with some extra attributes in it, making it useful for postscript. Usually you can open them in programs like Illustrator and Photoshop (among others).
What is the cost of a motherboard?
if you have to ask on this page you will be incapable of installing it yourself
and for your information the word motherboard is your word
it is actually a printed circuit board for a camera
and if you want to be exact it may be a motherboard as it acts in the same capacity whether it is in a camera or a computer
Best advice is get a new camera as you will having to that before long
Why do I get Error 99 in my Canon EOS 350 D?
1. Turn off the camera.
2. Remove the lens, battery, and CF card.
3. Allow the camera to sit without power for approximately 20 minutes.
4. Insert a fully charged battery, and turn on the camera.
5. Depress the shutter button as you would to take a picture.
Does the “ERR 99′ message appear? If it does, then the camera should be
serviced. If it does not, then please proceed to the next set of steps:
1. Turn off the camera.
2. Insert the CF card.
3. Turn on the camera.
4. Format the CF card in the camera.
5. Depress the shutter button as you would to take a picture.
Does the “ERR 99′ message appear? If so, then the CF card is the most
likely source of the issue. Try using a different card.
If the message does not appear, please complete the following steps:
1. Turn off the camera.
2. Clean the lens contacts by gently rubbing them with a pencil eraser
or soft cloth. Be careful that you do not let any debris fall into the
camera body.
3. Reattach your lens.
4. Turn on the camera.
5. Depress the shutter button as you would to take a picture.
If the “ERR 99′ message only appears when one particular lens is
attached, then that lens should be examined by a service technician.
If you see the “ERR 99′ with a different Canon lens attached, then the
camera should be serviced.
Nikon d-90, shadows in pictures
if you're using pop up flash, you'll get more shadows doing a portrait shot than a landscape shot just due to the position of the flash bulb and the angle the shadows are cast.
Reble xt flash will not pop up why?
It depends on what setting your main top dial is set on? The flash will not pop up if you have your main dial set on P, Tv, Av, M, A-DEP . If you are using one of these setting you have to manually turn on the flash by pressing the small button on the side of the lens with a Flash icon next to it.
The only time the flash will automatically pop out is if you are using AUTO, Portrait, Close Up...etc. these icons would be underneath the Auto setting which are called Scene Mode, hope this helps ?
Not finding what you are looking for?