20 Most Recent
Questions & Answers
How do I create a
DEGREE AND OTHER SYMBOLS ARE LOCATED IN OFFICE SOFTWARE LIKE MS WORDS. IN WORDS YOU MAY PRESS "INSERT" THEN "SYMBOLS
" THEN CHOOSE YOUR SYMBOL THEN ENTER
on Aug 16, 2010
Nec superscript 860 printer driver
As you might all ready know, this printer is not supported by Vista,
pasible solution: - if you have another "old" computer, you could install your printer on that, and share it, that way you can printe via the other computer.
in case you want drivers for all other software, here is the link
on Jul 13, 2009
Nec 860 laser printer fuser unit
remove cartridge and leave top door open, then remove two screws in back ; open front sheet panel to find two screws to remove then remove outer case carefully AND PLACE ON LEFT SIDE BECAUSE THERE'S A RIBBON WIRE ATTACHED.
there are 4 screws holding the fuser unit in place, remove AND LIFT OUT BY ROLLING TOWARD YOU to reveal 2 screws to access the red roller assembly!
In my case there was a very tightly wound piece of paper stuck in there not visable without removing the screws on the fuser unit!
on Dec 18, 2008
Problem in feeding papers
Sounds like the pick up rollers are either dirty or are worn out. You can try cleaning them with a soft lint free cloth. Just look for a roller or wheel looking item where the printer picks up the paper. If they feel very smooth then they maybe worn out and may be replaceable. Check the owner's manual or the manufacturer's website to find out.
Hope this helps!
on May 11, 2008
Not finding what you are looking for?