Top 20 NEC MobilePro 900 Handheld Questions & Answers


install the driver of your mobile in laptop

NEC MobilePro... | 131 views | 0 helpful votes


Which one did you do first: Did you install ActiveSync 4.5 first, or did you try installing the driver first?

The best way to do this is as follows:

  1. Download and install ActiveSync (4.5 is what i use both at home and work and it works great with the NEC 900 and 900C's.
  2. Restart your Windows XP Machine (I assume you don't have Vista)
  3. Next, follow the instructions for the installing the NEC 900 usb drivers (these drivers should be installed AFTER installing ActiveSync... (it seems to work that way without problems for me).
  4. Next, restart your xp machine again.
  5. Now, connect your NEC MobilePro 900 to your Windows XP machine, and it should perform smoothly.
If this does not work for you, you can contact the folks at usedhandhelds.com, they sell and repair, as well as provide support for these machines.


Hope this helps

NEC MobilePro... | 1,323 views | 0 helpful votes


You will need to call your service provider (not the phone maker)and tell them you need the code and red the # off the sim card when ask to do so.

NEC MobilePro... | 314 views | 1 helpful votes


wanderfull

http://foro.todopocketpc.com/showthread.php?t=169252

NEC MobilePro... | 229 views | 0 helpful votes


turn on the mic from the setting by double clicking on speaker icon on notification area near to time. click on option and check the mic volume on.

NEC MobilePro... | 519 views | 1 helpful votes


Basicly the wireless router needs to be connected into the internet, then you will be able to connect to it. You need to install the card and make sure it works in your device, then connect into the router and it should work fine.

NEC MobilePro... | 662 views | 0 helpful votes


Do you still wish to work this problem? The Premium Question you posted below?

http://www.fixya.com/support/t1168121-wireless_internet

It looked like you abandoned the process even though you had sort of asked for me as if my contact with you was lost.

The way our system works, when you refuse a solution, you can't go back and I can't communicate with you further.

I was looking over the recent problems I had worked when I saw you had posted a few logical questions, such as why were you going to be billed, etc.

I'll be glad to work with you some more, just ask by replying using the Text Area Comment box below.

Regards,
Worldvet

NEC MobilePro... | 89 views | 0 helpful votes


This can have more than one cause. It could be the touch screen going bad, or as little as dust in between the outer outer and inner layers of the screen glass. This can be fixed by carefully removing the screen, removing the outher layer (touch screen) and with a very sensitive material and/or a can of dust remover, and removing the hair/dust particles that get in between. This takes time and you want to be careful not to break anything.

I work for a company called UsedHandhelds.com that sells and repairs these devices. We might have a decent screen.

Go to www.hpcfctor.com or www.hpcnec.com and post on their forum, they do have a section on how to do this, I believe.

hope you can get it fixed.

Solomon
my email is [email protected] if you want to contact me.

NEC MobilePro... | 226 views | 0 helpful votes


http://foro.todopocketpc.com/showthread.php?t=169252

NEC MobilePro... | 138 views | 0 helpful votes


What version of ActiveSync do you have on your computer?

I assume that you have had this device for a while and are not new to it. I am currently using version 4.2 of ActiveSync, which you can download from Microsoft, and rarely have any problems with it.

I would try doing a soft-reset on this machine, restarting your desktop computer. I would recommend uninstalling ActiveSync if you have an older version and installing 4.2, or even 4.5, they both seem to work well for me, and I rarely have problems. If this doesn't work, you can always do a hard reset on your 900, which is removing both batteries, waiting no less than 15 minutes with both batteries off, and then re-inserting the batteries and starting over. (Do this only if you have nothing you would regret losing, or if you have backed-up your data.)

I mentioned the hard-reset because it can often save you a lot of hassle of looking all over for the answer and then finding out that the answer you got gets you nowhere.

If you are able to, I would do a hard reset plus uninstall older version of ActiveSync and install either version 4.2 or 4.5 on your Windows XP or earlier machine, and then see if that works.

If that does not work, go to http://www.hpcfactor.com/forum, go to the section for Handheld PC's, and make a post with your problem and someone will answer. They are really good with these machines and can usually point you in the right direction.

Hope this helps

Regards,

elMono28

NEC MobilePro... | 260 views | 0 helpful votes


Hi,
Windows Vista is a nuisance, in my own experience.
it has too many issues with drivers et,c.
i,d suggest seeking the setup cd, that would have been packaged with your Hand-held, Or PDA.
This would have had various Applications on it. And Also Active-Sync 3.5. However Vista. Will probably run or use Active-Sync 4.0. which is available from M$ Site. if you download from a computer running Windows 2000 Or XP. then put onto a memory card, or burn to a CD. that you can then install onto your PC.

Long-term, i,d suggest Considering XP. as a more stable and reliable Operating System.

Hope this Helps.

Mike @ Compurepair.

NEC MobilePro... | 116 views | 0 helpful votes


http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=bpia2302
http://support.microsoft.com/default.aspx?scid=289706
1) make sure you have the latest active sync installed

C:\Program Files\Microsoft ActiveSync\drivers
or
c:\windows\system32\drivers....with activesync 3.7 anyways.
2) go to contro panel -> system -> device manager -> view device b
connection -> plug and play bios -> pci bus -> usb host controller -usb root hub
3)delete everything uner usb root hub.
4)from control panel run add new hardware
5)now everything under your computer's usb hub including the cradl
will be installed properly.
6)once this installation is performed, you will make sure to see "H
USB Sync 1620" under USB root hub

NEC MobilePro... | 440 views | 0 helpful votes


I have a Toshiba Satellite laptop and experience this problem with the mike stopping suddenly too. Your solution may not be as easy as mine was, but here goes ... Did you check the audio setup? Go to Audio Properties, and click Advanced so you can see the Microphone properties. Mine was muted and it wasn't me that muted it -- just seemed to happen suddenly and hopefully it's that easy for you!!!!

NEC MobilePro... | 1,615 views | 0 helpful votes


I'm having the same problem. Sorry man. I'll let you know if I find something out!
Zach

NEC MobilePro... | 421 views | 0 helpful votes


do a hard reset by removing the backup battery and main batteries. replug them and hold the power button for 10 seconds

NEC MobilePro... | 150 views | 0 helpful votes


How can Idial my friend

NEC MobilePro... | 20 views | 0 helpful votes


This is the site I use before using the pay for sites. http://www.hpcnec.com This is the link for your device. http://www.hpcnec.com/cgi-bin/simpleforum.cgi?fid=12&topic_id=1143848182 As per usual they always show you the removal or dismantle procedure and then advise you that installation is a reversal of the removal procedure. Yes, this includes the pay for Doc's as well, so all they really show you in detail is how to dismantle your device properly. Effective reassembly will be based on how much notice you took during dismantle, if you have a synaptic memory, it'll all go sweet. I use a digital camera too take a snapshot of everything assembled and again after you remove each peice of the device.

NEC MobilePro... | 2,602 views | 1 helpful votes


The problem is most likely the LCD is dying

NEC MobilePro... | 284 views | 0 helpful votes

Not finding what you are looking for?
NEC MobilePro 900 Handheld Logo

62 questions posted

Ask a Question

Usually answered in minutes!

Top NEC Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

6074 Answers

Are you a NEC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MobilePro NEC

  • MobilePro NEC

Most Popular Question

need puk code nokia

  • Computers & Internet
Loading...