20 Most Recent NEC MobilePro 750 Questions & Answers


Microsoft provides a patch that will need to be applied to the Exchange Server. This patch can be found at ftp://ftp.microsoft.com/bussys/winnt/winnt-public/fixes/usa/nt40/hotfixes-postSP4/Rnr-fix/rnr-fixi.exe. The server will need to be rebooted. The end user should then be able to connect using the IMAP4 client.

NEC MobilePro... | Answered on Sep 14, 2005


The CE Citrix ICA Client can be downloaded from Citrix.com * From the "Citrix Downloads" section scroll down until you see "Recommended Client Chart". * Look for "Windows CE" on the chart. * Click on "ICA CE Client" to download.

NEC MobilePro... | Answered on Sep 14, 2005


Some MobilePro units have exhibited the following symptoms when using Compact Flash Cards or ATA PCMCIA Memory Cards: 1. Storage Card folder is not displayed when you insert a PCMCIA ATA card and/or a Compact Flash card. 2. Warning message "Unidentified PC Card Adapter". 3. Warning message "Storage Card Warning" displayed. To fix these issues: If you have a MobilePro 750C without a ROM upgrade, download the file MP75Pcm.exe from support.necsam.com. For a MobilePro 750C with upgraded ROM, use the file MP75RPcm.exe. After the files are extracted, follow the instructions in the Readme.txt file.

NEC MobilePro... | Answered on Sep 14, 2005


The VGA adapter is only for use with Pocket Power Point: 1. Open a PowerPoint presentation. 2. Go to the View menu and select External VGA on the View Show On drop down menu. 3. To make the presentation display automatically, under Advance Slide choose Automatic and enter in the amount of time in seconds between slides. 4. Say OK to that screen, then go to the View menu again and select View Show and now the presentation should display on the VGA monitor in 640x480 and 256 colors.

NEC MobilePro... | Answered on Sep 14, 2005


The Arrow Up character is a vector image rather than a raster image. This is a limitation of all Windows CE devices.

NEC MobilePro... | Answered on Sep 14, 2005


On MobilePro systems, which both batteries have fully discharged, the user must perform a hard reset after charging the batteries for approximately 10 hours to ensure proper operation. If the systems fails to power on the user must perform a "hard" reset to initialize the power management circuitry.

NEC MobilePro... | Answered on Sep 14, 2005


* Empty your Recycle Bin on a regular basis. * Delete unused programs and files. * Reduce the storage space reserved for Internet Cache. o Open Pocket Internet Explorer (PIE) o Select View, Options and Advanced. o Adjust the size of cache, select Empty Cache When Exiting or disable caching altogether by removing the check mark from Enable Caching. * Consider external storage as an alternative.

NEC MobilePro... | Answered on Sep 14, 2005


This error occurs because Windows CE first moves the file to the recycle bin before deleting it, and if there is insufficient space, the error message is displayed and the system appears to hang. To resolve this issue, use one or more of the following methods. * Empty the Recycle Bin Use the following steps to empty the Recycle Bin: 1. Depress the "Alt" key and tap the Recycle Bin. 2. Tap "Empty Recycle Bin" 3. Tap "Yes" when asked to confirm the file deletion. * Change the Properties for the Recycle Bin so that files are deleted instead of being moved to the Recycle Bin. Use the following steps to change the properties of the Recycle Bin. 1. Depress the "Alt" key and tap the Recycle Bin. 2. Tap "Properties". 3. Tap the check box for "Do not move file to the Recycle Bin, remove immediately on delete". * To make additional space available for the Recycle Bin. Use the following steps to change the properties of the Recycle Bin. 1. Depress the "Alt" key and tap the Recycle Bin. 2. Tap "Properties". 3. Tap the slider to the right.

NEC MobilePro... | Answered on Sep 14, 2005


This problem may occur if the user allows the batteries to discharge to a state where the MobilePro must shut itself down. This state may cause the system storage memory to become unstable requiring a "hard" reset after the system has been fully charged again. Failure to perform the hard reset may result in data loss at a later time. The user manual states that if you receive a message indicating that the batteries are low, immediately connect the AC adapter to the device. The solution is to perform a "hard" reset after fully charging the internal batteries, and then install the service packs, software updates and user software.

NEC MobilePro... | Answered on Sep 14, 2005


hold reset for about a minute or so.

NEC MobilePro... | Answered on Mar 22, 2012


Contact NEC directly to inquire.

NEC Computers &... | Answered on Sep 13, 2019


Hi..
AMR (Adaptive Multi Rate) is common audio file format for mobile devices like mobile phones, laptops, portable recorders.. etc.

in fact totem movie player can't play any amr files (files encoded in amr codec) by itself. Totem Player depends on Gstreamer libs, which haves necessary media handling components .

from your post its not clear that whether your totem can't play movie files from the very beginning or just you can not play movies recently.

your totem player may lacks Gstreamer library files or somehow your Gstreamer libs got corrupted recently.
Reinstalling Gstreamer Library file may help you.

you can find latest source version of Gstreamer on this page
(more detailed download of Gstreamer can be found on http://openports.se/multimedia/gstreamer-0.10 )

NEC Computers &... | Answered on Mar 21, 2019


What is your power and energy saver settings at? Tap windows key and start typing power sl and power and sleep settings should be the first choice. If its not obvious from there, scroll down and or click additional power settings. And the time out reason should be listed and be changable from there.

NEC Computers &... | Answered on Mar 15, 2019


what is it hooked up to? If a windows computer you can quickly do this by holding down 3 keys at once. Ctrl + Alt + choose an arrow key. Tip if your doing this on dual display, what ever screen your mouse last clicked on will be changed when you do this. Ctrl + Alt + left arrow or right arrow depending on orientation desired.

NEC Computers &... | Answered on Mar 15, 2019


connect it to computer and power source and then right click anywhere on desktop. choose display settings. May need to scroll down in your display settings, but windows 10 will automatically detect additional displays from that screen. Then you can choose extend or duplicate and choose primary and resolution.

NEC Computers &... | Answered on Mar 15, 2019


In windows or the bios? If its Windows then reinstall windows with an english install media.

NEC Computers &... | Answered on Jan 31, 2019

Not finding what you are looking for?
NEC MobilePro 750 Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top NEC Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a NEC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MobilePro NEC

  • MobilePro NEC

Most Popular Question

citrix ica ce client

  • Computers & Internet
Loading...