20 Most Recent Cisco 7910 IP Phone Questions & Answers

Cisco 7910 IP... | Posted on Jun 05, 2014 | Be the first to answer

Cisco 7910 IP... | Posted on Feb 04, 2014 | Be the first to answer

Cisco 7910 IP... | Posted on Dec 07, 2011 | Be the first to answer

Cisco 7910 IP... | Posted on Sep 02, 2011 | Be the first to answer


You can try a couple of things: Unplug the power cable from the phone, hold dows the # key, and then plug the power cable in again. The phone begins its power up cycle. Release the # key after the Speaker button is no longer lit. You should see the following message on the phone: "Reset key sequence detected" Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash. If you enter this key sequence correctly, the phone displays this prompt: Keep network cfg? 1 = yes 2 = no In order to maintain the current network configuration settings for the phone when the phone resets, press 1. In order to reset the network configuration settings when the phone resets, press 2.
Or to perform a full reset: Press **#** to reset the Cisco IP Phone 7960

Cisco 7910 IP... | Answered on Mar 15, 2011


  1. Press **# in order to unlock Network Configuration on the phone.
  2. Press Settings.
  3. Press 3 on the keypad (or scroll down) for Network Configuration.
  4. Press 33 on the keypad (or scroll down) for Erase Configuration.
  5. Press the Yes softkey.
  6. Press the Save softkey.

Cisco 7910 IP... | Answered on Mar 03, 2011


How to set a Cisco IP phone to factory default Reset configuration of Cisco IP Phone (7910, 1911, 7940, 7941, 7960, 7961)

To set the Cisco IP phone to factory default completes the following steps: should be completed:

For 7940, 7941, 7960, 7961 phones:

1. Power up the phone (unplug power cable and plug in again and hold the # key.
2. Release # when lights start flashing.
3. Press 123456789*0#.
4. Press 1 to keep network configuration or 2 to lose the network configuration.

For 7906G and 7911G phones:
1. Power up the phone (unplug power cable and plug in again and hold the # key.
2. Release # when MWI starts flashing.
3. Press 3491672850*#.

Cisco 7910 IP... | Answered on Jan 11, 2011


please check if firewall is ON on your netgear router...

Cisco 7910 IP... | Answered on Jan 13, 2010

Cisco 7910 IP... | Posted on Dec 04, 2008 | Be the first to answer


Unlocking a Cisco 7940

Method 1:
1) Unplug the phone
2) Plug the phone back in while holding the # key
The phone will soon display “Reset key sequence detected”
3) After several lights flash press the following keys in order:
1 2 3 4 5 6 7 8 9 * 0 #
4) The phone will then ask you if you want to save the network configurations:
Save network cfg? 1=yes 2=no
5) The phone will soon display “Factory reset initiated” and will continue
through the boot up process.
If that process fails to work for some reason there
is a second method.

Method 2

Complete these steps:
  1. Press Settings.
  2. The Network Configuration lock symbol must be unlocked. If not, exit to the main window and press ** # again.
  3. Press 3 on the keypad (or scroll down) for Network Configuration.
  4. Press 33 on the keypad (or scroll down) to Erase Configuration.
  5. Press the Yes softkey.
  6. Press the Save softkey.
The phone will now be reset.

Also see this link
http://www.cisco.com/univercd/cc/td/...tain.htm#93250

Cisco 7910 IP... | Answered on Nov 25, 2008


Is the phones registered to CallManager or CME?
if CM, then it could be because of partitions and Calling Search Spaces. PTs are placed on the line and are restricted by CSSes. http://cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_1_3/ccmsys/a03ptcss.html#wp1020642

If it is CME, then it could be a configuration issue
http://cisco.com/en/US/docs/voice_ip_comm/cucme/roadmap/itsph.htm

Cisco 7910 IP... | Answered on Feb 13, 2008


    these are the popular firewall for recent days:
    ·Packet filtering firewall
    ·Circuit-level gateway
    ·Stateful inspection firewall
    ·Application-level gateway (aka proxy firewall)
    ·Next-generation firewall

Cisco Computers... | Answered on May 28, 2020


  • Packet filtering - ...
  • Stateful filtering - ...
  • Routing support - ...
  • Transparent firewall - ...
  • AAA support - ...
  • VPN support - ...
  • Supports IPv6 - ...
  • VPN load Balancing -

Cisco Computers... | Answered on May 13, 2020


DO NOT CALL FAKE NUMBERS OR GO TO FAKE WEBSITES. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you. Please only ever use the support contacts from the official company website.

Cisco Computers... | Answered on Oct 21, 2019


Su mensaje no califica como una pregunta o consulta para un problema, intente en otro lugar

NO HAGA ESTE SITIO CON SU BASURA
Lleve su BASURA a otro lado

Su mensaje califica como SPAM

Cisco Computers... | Answered on Oct 20, 2019


Your message does not qualify as a question or query for a problem, try somewhere else

DO NOT MAKE THIS SITE WITH YOUR GARBAGE
Take your GARBAGE to another Side
Your message qualifies as SPAM

Cisco Computers... | Answered on Oct 19, 2019


Your message does not qualify as a question or query for a problem, try somewhere else
DO NOT MAKE THIS SITE WITH YOUR GARBAGE
Take your GARBAGE to another Side
Your message qualifies as SPAM

Cisco Computers... | Answered on Oct 19, 2019


ACURTNADA, Your message does not qualify as a question or query for a problem, try somewhere else
DO NOT MAKE THIS SITE WITH YOUR GARBAGE
Take your GARBAGE to another Side
Your message qualifies as SPAM

Cisco Computers... | Answered on Oct 19, 2019


Warning SCAM - DO NOT CALL THESE NUMBERS. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website

Cisco Computers... | Answered on Oct 19, 2019


Warning! This is a SCAM - DO NOT CALL THESE NUMBERS. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website

Cisco Computers... | Answered on Oct 18, 2019

Not finding what you are looking for?
Cisco 7910 IP Phone Logo

Popular Tags

15 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Cisco Linksys E1000 WirelessN Broadband Router Network Routers
Cisco Linksys E1000 WirelessN Broadband Router Network...

179 Questions

Cisco (1841) Router (cisco1841)
Cisco (1841) Router (cisco1841)

58 Questions

Cisco 7940 IP Phone
Cisco 7940 IP Phone

67 Questions

Cisco Linksys E2000 Advanced WirelessN Broadband Router Network Routers
Cisco Linksys E2000 Advanced WirelessN Broadband Router...

59 Questions

Cisco Photosmart C4780 Wireless AllInOne Printer With Linksys By Cisco WirelessN Broadband Router
Cisco Photosmart C4780 Wireless AllInOne Printer With...

45 Questions

Check Out the Mobile Browsers Report
Check Out the Mobile Browsers Report

View all Fixya Reports

Top Cisco Computers & Internet Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Mike

Level 3 Expert

4372 Answers

Jax Planet
Jax Planet

Level 2 Expert

923 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cisco Computers & Internet

  • Cisco Computers & Internet

Most Popular Question

unlock cisco ip

  • Computers & Internet
Loading...