20 Most Recent OEM Systems OEM: 32-bit PCI CMI8738-6 5.1 Channel Sound Card - Page 7 Questions & Answers

If you open System Information (Apple Menu > About This Mac > System Report) and look under Card Reader, what do you see? Try this with both a card inserted and no card inserted.

If the card reader is recognized, you should see at least a Vendor ID, Serial Number, etc. Otherwise, it's a hardware or Firmware issue. If you see card info with a card inserted, then the card is recognized but no being mounted, and most likely you've got a software problem.

For more fleshed-out solutions, you could refer to the following article:
5 Best Solutions to Fix 'Mac Won't Read SD Card' Error on macOS

Computers &... | Answered on Jan 04, 2021

  1. Try uninstalling and reinstalling the TurboTax software on your computer.
  2. Clear the cache and cookies from your computer.
  3. Perform an account recovery process to resolve the TurboTax login trouble.

Computers &... | Answered on Jan 02, 2021

visit the website. check on FAQ for deactivate account.

Computers &... | Answered on Jan 02, 2021

I have tried in my old version of BlueStacks but if you are using new then it may be you have to search for whatsapp App.
First Download a Bluestacks app for your Mac then,
click on Facebook app and send a what up message to yourself after login then,
click on Download Now and finish installation .
Enter your phone number for verification.
and you have successfully whatsapp in your bluestack.

Computers &... | Answered on Jan 01, 2021

Connecting your printer to Alexa
To get started, first you'll need to connect your printer to Alexa. Simply say "Alexa, discover my printer", or navigate to the Devices screen in the Alexa App, select "+", select "Add Device", and choose "Printer" as the device type.

Print with Alexa: Amazon Devices & Accessories - Amazon.com

Videos as well



Computers &... | Answered on Jan 01, 2021

1. Close any running programs and open Windows so you are back at the desktop.
2. Click on the Start button.
3. In the Start Menu Search Box type msconfig
4. Then press enter on your keyboard.
5. The System Configuration utility will open
6. Make sure Startup Selection is set for Normal Startup.
7. Click on the Boot tab.
8. Make sure Safe boot is unchecked
9. Press the Apply button and then press the OK button.
10. Click on the Restart button to reboot your computer.
If that does not fix it, follow other methods mentioned in this article:
6 Fixes for Windows Has Recovered From an Unexpected Shutdown

Computers &... | Answered on Dec 31, 2020

Do you get an option to boot into repair mode?
Have you created a recovery cd?
Do you have any time after you restart to do anything?

Click on the power icon. You can do this if you are logged in by going to the start (windows icon) then the power icon. OR before you even log in click the power icon (right side) You will be given some options one will be restart - WHILE holding down the shift key click restart. After a few minutes, the recovery console should be displayed. Chose troubleshoot and repair windows - do not restore before posting back.

Computers &... | Answered on Dec 30, 2020

Convert to what .............................

Computers &... | Answered on Dec 30, 2020

Follow the instructions step by step

1. Turn off printer, cable power still plug in,
2. Press Stop/Reset button don't release
3. Press Power Button don't release and than release Stop/Reset button
4. Press Stop/Reset button 2X , wait until service mode to " 0 "
5. Turn off printer, cable power still plug in
6. Press Stop/Reset button don't release
7. Press Power Button don't release and than release Stop/Reset button
8. Press Stop/Reset button 4X , wait until service mode to " 1 "
9. Turn off printer, and loose cable power, wait one minute.
10. Connect cable power, turn on printer again, now this printer ready to use.

If you are satisfied, please rate or/and leave a testimonial. Thanks!

Computers &... | Answered on Dec 30, 2020


You can purchase a new graphics card and install no problem. Dont use S-Video tho, as the quality is not good. HDMI graphics cards are much cheaper these days.

Stay with Nvidia, as the onboard chip for your PC would support this better.

Computers &... | Answered on Dec 30, 2020

Yes. You can use two routers. Your first router is your most main router. Then you can put your second router where you want to use it. If for example, your house has three floors, your main router should be on the first floor only. Take your second router to the second floor only because that signal will reach the third floor.
How do you configure?
It is better that you just buy internet cable or LAN cable here. You can see the photo at this link

Connect it to the main router usually on the first LAN port and then connect the other end to your second router so that you can have internet.7dcf3dd1-083e-45af-a2e2-bffadbe8209e.jpg Visit Here For Router Products Visit

Computers &... | Answered on Dec 30, 2020

How do I know my husband's password on fb and messenger?

Imposibleng malaman mo. Kung susubukan mong malaman, pandaraya ito. Palitan ang asawa mo o harapin mo siya. Tandaan din na kami ay isang site ng Hilagang Amerika at nagsasalita lamang ng Ingles.

Computers &... | Answered on Dec 30, 2020

Mobile backend as a service - Wikipedia

en.wikipedia.org > wiki > Mobile_backend_as_a_service
Mobile backend as a service (MBaaS), also known as "backend as a service", is a model for providing web app and mobile app developers with a way to link their applications to backend cloud storage and APIs exposed by back end applications while also providing features such as user management, push notifications, and ... ‎Purpose · ‎Service providers · ‎Business model

Computers &... | Answered on Dec 29, 2020

Contact Chimei directly to inquire.

Computers &... | Answered on Dec 29, 2020

It is a strange system shipped with no operating system. Whichever version of Windows, check Settings - Display. Also check by connecting another monitor known to work.


Manual and other information



Computers &... | Answered on Dec 29, 2020

Please follow the directions from this link to repair your computer:


If you can't start into Windows on your computer, you will need to use another computer running Windows 10 to create the Windows 10 install disk.

Computers &... | Answered on Dec 29, 2020

husainjam, did you find the solution, my HCL laptop is giving me similar problems.

Computers &... | Answered on Dec 29, 2020

Not finding what you are looking for?
OEM Systems OEM: 32-bit PCI CMI8738-6 5.1 Channel Sound Card Logo

Popular Tags

14 questions posted

Ask a Question

Usually answered in minutes!

Top OEM Systems Computers & Internet Experts

Bill Boyd

Level 3 Expert

53816 Answers

Moderator UK
Moderator UK

Level 3 Expert

33138 Answers

Dayton Computer
Dayton Computer

Level 3 Expert

1578 Answers

Are you an OEM Systems Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

OEM Systems Computers & Internet

  • OEM Systems Computers & Internet

Most Popular Question

sound crad driver hsp56 cmi8738 pci sx

  • Computers & Internet