20 Most Recent Palm Zire Mono M150 Handheld Questions & Answers

HP, Palm's new owner, has offered
Palm Support Palm Tungsten E2 Palm Desktop 6 2 and HotSync Manager... to help sync PDAs to Win 7. However it lists the z22, which used Palm OS 5.4, rather than the m150, which used Palm OS 4.1. I don't know if that will provide a barrier, but good luck in your attempt.

Palm Zire Mono... | Answered on Jun 20, 2014

If you have not already done so, you need to install palm desktop software, install and turn on hotsync and install the usb driver for your device.

Palm Zire Mono... | Answered on Jun 18, 2014

Try doing a soft reset on the pda, this will usually resolve the issue. Then reperform the aliginment task.

Palm Zire Mono... | Answered on Jun 10, 2012

non riesco tramutare inglese all'italiano

Palm Zire Mono... | Answered on Jun 10, 2012

the screen says use stylus to tap center of target ...i do that and it goes to upper left corner i tap and it goes lower right corner and back and forth between the to corners?

Palm Zire Mono... | Answered on Jul 18, 2011

You could try


if you need a user manual


if you want the schematics etc

We've used them in the past and found them very good.

Also if it is not listed then ask via the link and they
will probably be able to get it for you.

Palm Zire Mono... | Answered on Jul 18, 2011

Welcome to Fixya. Please go to the link below it will teach you on how to sync your old palm 150 to windows 7. The reason why you can't sync your zire 150 to Windows 7 pc is that orignal CD's driver isn't compatible with seven.
Windows 7 and Vista Hotsync
Thanks for using Fixya

Palm Zire Mono... | Answered on Jun 17, 2011

Welcome to Fixya

Download the Palm Desktop 6.2 software if you are using Windows 7. This will allow you to sync your handheld deivce to your windows 7 PC. Please click here.

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Palm Zire Mono... | Answered on May 06, 2011

Found a Zire PDF manual "Handbook for Palm (tm) Zire (tm) Handheld" at the following URL "http://nettopdf.info". You can also do an Internet search for PDF "zire_ug.pfd". The graphics are for a Zire Mono M150 but I believe this is a general manual for most early Zire models. Found on 2/6/2011.

Palm Zire Mono... | Answered on Feb 06, 2011


Palm Zire Mono... | Answered on May 23, 2010

This isn't too bad to do. Setup your new palm desktop so the software is running in windows. With your external hd connected use my computer or a file manager to look at it. If the files were just copied over to the the ext hd then you need to look for the directory where the palm files are located. It may be called palm or desktop or something you named it. That might be the hardest part of this ie finding the files. Now you want to look in that directory and there should be another folder or directory with your unit ident on it. So if your name on the zire is Fred Flintstone look for a directory called Fred. Under this folder there will be one called archive. This folders is a copy of what was installed onto your zire.

Depending on what you want to copy or reinstall you may have to do this in two stages. There are the normal files that are happy to just reinstal and there are files for contacts and calander which don't like to. You can try to install them but don't worry if they won't with the other files. If you copy the folder over to where your new copy of desktop is desktop will now see this as a second user id. You will probably have to rename it to Fred2 so it copies over. The game and other data files will just copy over to the directory under desktop called Quick Install/handheld. The next time you sync your zire all of those files will get uploaded. The calendar and other data files will have to be exported and them imported. So we load up desktop and open the Fred2 user. Click on contact, then under file, export, save the file where you can find it. Do the same for notes, contacts and tasks. I think you will only have the three. Now switch over to the Fred account. And import these files. Now Fred will have all of your old data. Just do a htsync and you are back up and running.

Its a bit of work but I never could never find a easier way to restore mine after desktop or windows or the drive was redone.

So what you want to do is copy what is in this directory

Palm Zire Mono... | Answered on Apr 13, 2010

That can be from a few things. The digitizer or calibration. If you have a screen protector take it off. Perform a reset. Then run the calibration under prefs.
There are digitizers available for these from several pda repair shops online.

Palm Zire Mono... | Answered on Mar 23, 2010

Older palm products and vista aren't compatible. You either needs to transfer info via bluetooth or upgrade your palm if you wish to continue using vista. As far as transferring, possibly a memory card.

Palm Zire Mono... | Answered on Sep 29, 2009


When you turn on your palm there should be a bar at the top that has the time in it. Tap that with your stylus. There will be a drop down menu and tap "delete". From there your palm will generate a list of all the programs you have installed. After the list is done generating tap the program you want to delete and then tap the delete button. It will delete the program and you will not have it on your palm. Hope this helps. If you need further help please leave a comment.

Palm Zire Mono... | Answered on Sep 09, 2009

Not finding what you are looking for?
Palm Zire Mono M150 Handheld Logo

31 questions posted

Ask a Question

Usually answered in minutes!

Top Palm Computers & Internet Experts


Level 3 Expert

13434 Answers


Level 3 Expert

85223 Answers


Level 2 Expert

253 Answers

Are you a Palm Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Zire Palm

  • Zire Palm

Most Popular Question

upgraded from windowxp windows

  • Computers & Internet