20 Most Recent
Palm Treo 650 Handheld - Page 6 Questions & Answers
Palm treo 650 wont power up
It may be past the point of turning on.
If this is the case, if you connect it through the USB cable to your computer for a little while, it can get a small charge.
Trickle charging
Some Palm
devices have the ability to "trickle charge" from a USB port on a PC or
Mac. This means that it receives a very small amount of charging from
the USB port, even if it is not connected to its AC charger. If your
device is capable of this function, the charging time will be
significantly longer for a trickle charge (depending on the power
rating of the PC USB port). However, the device may not charge at all
on an unpowered USB hub (or for example off off a keyboard).
If you can then power it on afterwards, connect it to the regular power charger.
My voice drops out on palm treo 650
Sorry, no solution - just some added info. I have the same problem with a Palm Centro. Changed sim card (O2) but no improvement. Palm eventually replaced Centro, but fault persists. Anyone with similar problems / solutions?
Palm treo is in spanish how do i change to english
Check if your handheld supports multiple languates. Your product manual may contain information about changing languages. If it does not, you may wish to find out if your handheld supports multiple languages by performing a hard reset (be aware that you will erase all data from your device when you do a hard reset). On the startup screen after the hard reset, you may be asked to select a language. If you asked which language you want to use, select a language and install a localized Palm Desktop (below). If you're not asked, your device does not support multiple languages.
The radio on my phone wont' turn on
If the radio won't turn on it generally means it is not within coverage or the phone's account is deactivated. Take the battery out and leave out for 2 minutes. Put the battery back in and the radio should come back on. If it does not then go through the menu to bring the radio back online.
You can also try this:
https://www.wireless.att.com/support_static_files/KB/KB37092.html
These phones are also known to have issues if the sound is turned on for some reason, try turning the sound off and back on.
Memory crd
ring settings select memory card data an select the song
dont forget to rate me
Screen back light is always off. How can I turn it on?
Hi,
I am not sure if you have a manual or not. I found on online for you. Click on the following link:
http://palmone.r3h.net/downloads.palmone.com/documentation/treo680gsm_UG.pdf
You will get a pdf document with your user guide on it. At the bottom it will show page 1 of 308. You want it to be on page 208 and that will actually be page 194 in the manual. This is the page that should show you how to set up your back light. The manual shows the buttons to puch so I think this would be a better way for you to go since you have the phone nd will be able to tell what buttons they are talking about. Hope this helps. Best wishes.
How do i load software on to my phone
Hi
usually with the help of hotsync
you may refer to compatible software on
http://kb.palm.com/wps/portal/kb/na/deviceselector/page_en.html
http://www.palmfocus.com/treo650software.php
IT TURNS OFF AFTER A
HI,
It seems that you need to free up some space on your phone, it could be
full and thats why you getting a problem going slow to freeze..
Hope this helps
My Treo 650 cellular phone cannot turn on.
Same thing happened to me about a month and a half ago. I own a 680. I had to open the unit to try to dry where water leaked in. A cellphone technician advised me to try a vaccum cleaner to **** the water. But I didnt do it. I used paper towels. Next get a Ziploc bag and fill it with about 1/3 cup of rice. Leave it sealed for a week. Rice absorbs any remaining humidity inside the cell. Then, try to assemble it partially to test it. If nothing happens leave it another week. I used a hair dryer, at some point to make sure it was dry, but dont overdo it cause extreme heat can damage components. Be careful at opening, I disconnected the LCD data ribbon and its been difficult to stick it back together. Now today, finally I was able to turn it on and everything works fine with the exception of the LCD light. I can see whats on the screen but I need an external light source, maybe replacing the LCD screen will fix it. Good luck with the repair.
Vista hotsync
Older palm products and vista aren't compatible. You either needs to transfer info via bluetooth or upgrade your palm if you wish to continue using vista.
AirTel GPRS in my TREO650
use the following settings
IP address 202.56.231.117
Proxy Port Eanbled
Proxy port number 8080
APN airtelgprs.com
al other settings could be anything but should be something sensible, like name, homepage.
No user ID, no password. both blank.
Happy surfing.
I cant make or receive calls on my palm treo 650
Hi,
It sounds like it was a network issue. Palms have this weird thing that when the signal fades in and out, it slows, locks or refused to work. That has been my experience with it. Glad you were able to get it working. Try in some better region and leave me comment
RNJ VINOD KUMAR
HOW TO PERFORM A HARD RESET ON Treo 650
Performing a hard reset on a
Treo 650will erase everything on the smartphone. Most people do this because of
trouble with the Treo 650's software. There are several key stages to
performing a hard reset. Follow these steps to learn how to do it
properly.
- HotSync the Treo 650 to your computer to ensure that you have
all of your information backed up. You will lose everything on your
Treo 650 with a hard reset.
-
Step 2
Press
and hold down the red phone key on the right side of the Treo 650
keyboard until the Palm screen appears. This will begin the hard reset.
-
Step 3
Let go of the red phone button when you see the Palm screen.
-
Step 4
Read
the screen prompt carefully. It will ask you to press the up arrow key
to proceed with the hard reset or the down arrow key to abort. Press
the up arrow to continue with the hard reset.
-
Step 5
Wait
for the phone to reboot. When it comes back on, it will ask you to
select a language and walk you through the same introductory screens
you saw when you first got the phone.
-
Step 6
HotSync
your Treo 650 to your computer. When prompted, select your old username
to restore all of your contacts and information. This should complete
the hard reset process.
Not finding what you are looking for?