20 Most Recent Cisco 1750-4V Router - Page 8 Questions & Answers

Check the date and time in the router and computer are correct.

It is easier to access the management interface and change the guest password there.

If you have two SUP's this one will be in standby mode.

Try looking in the router's "Applications and Gaming" section for something called "QOS", or Quality of Service. You probably need to make some adjustments in there to increase the bandwidth assigned to your VOIP device/service.

I'm guessing this has something to do with "NAT" being restricted. It's complicated, and you'll have to open up some ports to your PS/3's LAN IP address. I suggest you search a bit on google and find one with photos that you can follow step by step.

It's likely to be found on their website http://www.cisco.com/

This may be a problem from something other than the router. The site may be rejecting your device that you're using. Try using a different device and get back with me if you still encounter problems. Thanks and god bless.

I suggest using the provided utility on the disk to fix your problems. Otherwise, get on a wired device that is on this particular network, get on a browser, and type http://192.168.1.1/ . This will ask for credentials, which you can find within the provided documentation. Find the tab at the top labled 'Wireless' and, as I would recommend, turn off all connections besides one primary 2.4Ghz connection. Also, double check that you're entering the password correctly. As simple as it sounds, an invalid password can lead to several authentication problems.

CISCO/Linksys -Toreset the Linksys back to the default settings -Press and hold the pinhole RESET button at the back of therouter with the power ON for 20 secs. then release the RESET button.To connect to your wireless router, the router's wireless settings needs to beconfigured with the SSID, encryption etc. and also the wireless cards in allthe laptops/computers needs to be configured with these router's wirelesssettings. Then the laptops/desktop computers can communicate with your wirelessrouter.Connect a LAN cable from the Linksys to the LAN port on your computer.Open a browser and enter the Linksys configuration URLhttp://192.168.1.1The default login = adminThe default PW = adminYou can protect your router by changing the default admin PW (write it down andput it in a safe place)Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.Now apply these settings to the wireless card in your laptop/computer.To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

to get into setting of the router open your web browser and in the address bar type 192.168.1.1 you will be asked for user and password. type admin for both. you will then be able to navigate through the settings to find your password and also you can change it if you want.

http://support.linksys.com/en-ca/support/routers/E1000

It is due to some internal problem with setting. first, resetting the router and update wireless adapter driver on the device and change your wireless settings. Downloading the latest firmware for your router if possible. I think it will give you some ideas.

Press 2 keys on Keyboard - the Function (Fn) key and the F2 key to toggle the wireless card on and off.

Unfortunately, the only way around this is a factory reset :-/ Before you reset the box, make sure you have your PPPoA or PPPoE usernname and password from your ISP as well as PVC settings. You will need these to get the broadband working again.

Nope. You know this cuz... you get an error "can't connect to the network" or you can't connect to the internet? Can you connect wired? The modem should be plugged into the router and the PC should be plugged into the router. A cable should be run from modem's internet port to router's internet port. Plug the PC into one of the router's ports labeled #1-4. Got the right passwords for your network? Are they saved in your devices? Has your password been changed? If this is a Cisco/Linksys router you can check the router settings by connecting to the router (wireless or wired) open a browser and typing 192.168.1.1 in the address line. The default User ID is <blank> and PSW is admin. This should take you to a menu where, under the Wireless Tab, you can change your SSID (broadcast name) type of security you have and password. If you have cable internet, you should change the mode to "G Only" or "G and N" if this is an N router and you have N devices. You probably don't have any A or B devices and "Mixed" will cause your router to run at 10Mbps instead of 50Mbps. If you have DSL or ADSL it won't matter cuz your internet won't do over over 3Mbps. You should also check for the Max number of wireless users. Some DSL ISPs will change that number to 5 or less to keep you from using too many of their resources. You should change that to 50.