QPS Que! Fire CD-RW Burner - Answered Questions & Fixed issues

hello sir..i have a solution to your CD burning problem...sometimes if you are not regularly using your CD-RW drive then there are chances of CD-RW lense prob,so please do clean the lense using lense cleaner CD available in the market,even then if you not able to burb the CD then please do reinstall the software which you are using for CD burning...i suggest you NERO software for CD burning which is a user friendly software...

Well you just take a small flat head screwdriver and the side grips and the faceplate just pop right off. Then you get the hooks to release on the inside of the main body by sticking the screwdriver in and popping the hooks.

you might have to physically unplug the leads for this cd burner then plug them back in this should activate the found new hardware wizard or you might have to uninstall then restart your computer then reinstall your DVD/CD or uninstall the driver then reinstall for this device click start control panel administrive tools,computer management,device manager scroll down cd dvd rom drives right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if your computer came with a motherboard disc the drivers could be on it make sure that the dvd burner is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or your drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd/dvd burner then plug them back in or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device click start control panel administrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.hope this helps dont forget to vote

To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

1. Click Start , type regedit in the Start Search box, and then click regedit in the Programs list.
   If you are prompted for an administrator password or confirmation, type your password, or click Continue.
2. Locate, and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}Caution There can be many instances of the registry subkey that is mentioned in step 2. You must make sure that you are in the appropriate registry subkey before modifying the UpperFilters and the LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the Default data value is DVD/CD-ROM and the Class data value is CDROM.
3. In the right pane, right-click UpperFilters, and then click Delete.
4. Click Yes to confirm the removal of the UpperFilters registry entry.
5. In the right pane, right-click LowerFilters, and then click Delete.
6. Click Yes to confirm the removal of the LowerFilters registry entry.
7. Exit Registry Editor, and then restart the computer.

hey i have 2 of the drives but no powercord or supply i was wondering how does it look could i get pics 

You need to use a disk made for Lightscribe. Lightscribe technology was developed by HP.

Look at your local store that handles CD's, and DVD's, and look for the Lightscribe disks.

More information about Lightscribe,

http://en.wikipedia.org/wiki/Lightscribe

You state that you have installed a new power supply. Check whether you have all the cables securely. One is a power cable and the other is a flat SCSI cable connecting your DVD drive to the motherboard.

I devised these simple steps that tend to remedy quite a few common USB problems.
.

1. Ensure it is connected directly to the computer to a USB 2.0 port not a USB 1.0 port as this can have effects on performance and reliability.

2. Use only the cables that came with it NOT one that fits that may have been lying around or is longer. Not all USB cables are equal even though they should be)

3. Do not connect through an external USB HUB unless that hub is USB 2.0 AND has its own power supply.

4. Use ONLY the power supply that came with it if it has an external power supply Don’t use any other unless you know it has both the same voltage and current rating e.g. 12V 500mA anything rated below that would not work properly.

5. Always use the same port for connecting your devices. Some devices do not like being switched about. If switched they may want to install software / drivers again.

If you suspect a cable NEVER get one longer than the one you want to replace

If you checked and fixed anything there and still have issues it may well be due to the device itself or a weakened usb port, a loose usb port.

To remedy the last two consider a new usb card if it for a PC

I am needing to reinstall my external Ativa drive, but cannot find the installation cd anywhere!!! HELP!

Hi Mil,

The connector on this drive is a firewire connector. They originated on Mac Computers, although some PC's have them they are not standard. You will either need to exchange this drive for a USB model or take your PC to your local shop and ask them to add a 1394 or forewire card to the computer in order to use the drive.

Also be sure to take the drive and cable with you as there are 2 standard sizes and you want to make sure the card they install is the right one, or has both.

Hope this helps FixYa,

Chris

try using a burning program wothy of the attempt.real player works off a basic set of drivers and fails on many occasions. if your burning from dvd to dvd use dvdfab version 5.0 or higher. this will right past any copyrights. or if burning from files use nero version 7.0 or higher. anything less is a waist of time.

go to lighstrcribe.com and dowload all the software there.
there are special programs/drivers there that you need to have.
then reboot and nero should pick it up

Use Internet Explorer to download this file:

http://winhlp.com/tools/resetdma.vbs

Run it.

Reboot system.

1. Clean Drive: commercial cd/dvd cleaner + air compressed can with narrow pipe inserted into device to reach lens.
2. Update you sw from http://www.lightscribe.com/ (Control panel, diagnostic tool, application)
3. be sure service is started: as Administrator go to Control panel/Administrative tools/Services
   double-clickon Lightscribe Service, and if it says disabled change it to automatic,then "start service" in the left pane if is already started and set toautomatic stop and restart it you don't have to reboot to see results.

It worked for me on HP6710b with internal drive and with liteon external burner

the driver is packaged with nero 7 essentials (Grrr...)

may be u r cable is out

1st check u r cables...

if it dont work pls contact ur computer dealer emidately...

 

or replace u r drive if it is in warrenty....

 

best regards & best of luck..

even u can mail me at my mailing add- [email protected] 

download free nero software will it select what you want the disc to be DVD or CD

Hi,Welcome to Fixya. Can you please provide the make and model of your webcam and the Operating system of your computer.Thanks

Not willing to pay for a "free" answer. Just won't bother.

u can follow this link
make a search for anything here