20 Most Recent Ricoh Aficio IS420 Flatbed Scanner - Page 4 Questions & Answers


93300
HRB (Head Relay Board)
fuse blown
Mounted on the top part of the carriage unit.

Ricoh Office... | Answered on Jan 29, 2020


need need new tires in tray 1

Ricoh Office... | Answered on Jan 06, 2020


SC-990 - Communication problem between BICU and input output board or software performance error.

I would suggest contacting Ricoh customer service.

Ricoh Office... | Answered on Dec 27, 2019


From things I have read about this error code, it could be happening because of using compatible sublimation inks which is causing this problem.
Check out the following link:
https://www.dyesubforum.co.uk/vbforum/archive/index.php/t-13457.html

Ricoh Office... | Answered on Dec 27, 2019


Try replacing the power cable that goes from the wall to the machine.The type of power cable used in the MP C3000 & C4500 has a hard plastic insert where it plugs into the machine that can get damaged by impact and short out. Also try checking the wall socket to verify that it is completely plugged in.
Worse case scenario it could be an I/O board.
If you have a contract with Ricoh, I would suggest placing a service call for them to come out and look at the machine.

Ricoh Office... | Answered on Dec 27, 2019


This is most likely a fuser issue. If you have a spare laying around, I would suggest replacing your fuser. If you have a contract with Ricoh, I would suggest placing a service call for them to come out and look at the machine.

Ricoh Office... | Answered on Dec 27, 2019


What you are looking for is the Ring Count Delay.

Unfortunately it looks as though this is not an option for this unit.
Here is the manual for the MP C4501.
http://support.ricoh.com/bb_v1oi/html/oi/re/model/mpc41/mpc41en.htm

If you need a service manual.
https://www.service-manual.net/?download=53457-ricoh-aficio-mpc4501-aficio-mpc5501-series-service-manual

Ricoh Office... | Answered on Dec 27, 2019


need to repair or replace fuser then reset code

Ricoh Office... | Answered on Dec 25, 2019


Just keep using it.

How to Reset a Ricoh to Factory Settings ' It Still Works


https://itstillworks.com > Hardware

Press the "./*" key and the "#" key on the Ricoh copier at the same time and hold for 10 seconds. Nothing will seem to happen until you hold both buttons down for the full 10 seconds. Once 10 seconds is reached, the copier will shut down and begin to re-boot.

Ricoh Office... | Answered on Dec 24, 2019


facebook da rahey erorr occread

Ricoh Office... | Answered on Dec 24, 2019


specify the functional problem

Ricoh Office... | Answered on Dec 17, 2019


The CIS is defective please replace if not then replace the BiCU is malfunctioning.

Ricoh Office... | Answered on Dec 17, 2019


No other procedure it should reset automatically you just need to switch your machine on

Ricoh Office... | Answered on Dec 17, 2019


You mean properly seat or reset an error code?

Ricoh Office... | Answered on Dec 04, 2019


Error sc21100 ALIM OFF-on , in RICOH SG 3110. Wath to do please ? thank you very much

Ricoh Office... | Answered on Nov 29, 2019

Not finding what you are looking for?
Ricoh Aficio IS420 Flatbed Scanner Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Ekse

Level 3 Expert

13434 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

IS Ricoh

  • IS Ricoh

Most Popular Question

need dreiver foe is420

  • Office Equipment & Supplies
Loading...