20 Most Recent
Ricoh IS420 Flatbed Scanner - Page 4 Questions & Answers
Fix colors adjustments after factory reset in printer ricoh spc262
To fix color adjustments on a Ricoh SP C262 printer after a factory reset, follow these steps:
Open the printer driver and go to the "Maintenance" tab.
Click on the "Adjust Color" button.
Follow the prompts in the wizard to adjust the color settings for your printer. This may include adjusting the color balance, gamma, and other settings.
Click "Apply" to save your changes.
Print a test page to see if the color adjustments have been successful.
If the color adjustments are still not satisfactory after following these steps, you may need to calibrate the printer. To do this, follow these additional steps:
Open the printer driver and go to the "Maintenance" tab.
Click on the "Calibrate" button.
Follow the prompts in the wizard to calibrate the printer. This may include printing a test page and adjusting the settings based on the results.
Click "Apply" to save your changes.
Print a test page to see if the color adjustments have been successful.
If you are still having issues with color adjustments on your Ricoh SP C262 printer, you may need to consult the printer manual or contact Ricoh customer support for further assistance.
My ricoh mp 4054 is saying replace fusing belt unit.please call for service now.. what can i do manually to reset it
If your Ricoh MP 4054 is displaying an error message indicating that the fusing belt unit needs to be replaced, you will likely need to replace the fusing belt unit in order to clear the error message and restore normal operation. This is a complex and technical process that generally requires the assistance of a qualified service technician.
Attempting to manually reset the fusing belt unit error message may not be possible or safe, as it may cause further damage to the printer or create a safety hazard. It is recommended that you contact a Ricoh service technician to properly diagnose and repair the issue.
When you contact Ricoh or a Ricoh-authorized service provider, be sure to provide them with the error message you are seeing and any other relevant information, such as the printer's model number and any recent changes or problems you have experienced. This will help them to quickly and accurately diagnose the issue and provide the necessary repairs or replacements.
Ricoh MP 4002. Problem with loading toner on it.
If you are experiencing issues with loading toner on a Ricoh MP 4002 printer, there are a few possible causes that could be contributing to the problem.
First, check the toner cartridge to ensure that it is compatible with the printer and has not expired. Additionally, make sure that the toner cartridge is properly positioned into the printer. If the toner cartridge is not correctly installed, it could be preventing the toner from loading properly.
Next, check the toner hopper, which is the component that holds the toner in place, and ensure that it is not damaged or blocked. If the hopper is damaged, it will need to be replaced.
If the hopper is not the issue, then it is likely that the transfer roller, which is responsible for transferring the toner to the paper, is not functioning properly. In this case, the transfer roller will need to be replaced.
If all components are working properly, then it is likely that the problem lies in the printer itself. You may need to take the printer to a service center for a more in-depth inspection.
Written by Chatsonic
I have ricoh aficio mp c2551 is showing sc361 code error
The SC361 error code on a Ricoh Aficio MP C2551 is typically caused by a problem with the fusing unit. The fusing unit is responsible for heating the toner particles and fusing them to the paper. This error code can be caused by a variety of issues, such as a malfunctioning fusing unit, a problem with the thermistor, or an issue with the fusing lamp. Here are a few steps you can try to troubleshoot and resolve the SC361 error code:
- Check the fusing unit: Make sure that the fusing unit is securely installed and that there are no visible signs of damage.
- Check the thermistor: The thermistor is responsible for detecting the temperature of the fusing unit. Make sure that it is connected properly and that it is functioning correctly.
- Check the fusing lamp: The fusing lamp is responsible for providing heat to the fusing unit. Make sure that it is functioning properly and that it is not burned out.
- Check for jammed paper: If there is jammed paper in the fusing unit, it can cause the SC361 error code to appear. Remove any jammed paper and clear the area.
- Check for debris: Make sure that there is no debris or dust buildup in the fusing unit that could be causing the problem.
- Performing a reset: Try performing a reset on the printer to clear any temporary error codes.
If the error persists, it's best to contact a Ricoh service technician for further assistance. They will be able to diagnose the problem and repair the printer. It's important to note that attempting to repair the printer on your own may void the warranty and could cause further damage.
How do you clear error sc669 03 on ricoh MP2501 machine
To clear error code SC669-03 on a Ricoh MP2501 machine, try the following steps:
- Turn off the machine and unplug it from the power source.
- Wait a few minutes, then plug the machine back in and turn it on.
- Perform a reset by holding the "Clear Modes" button for 5 seconds.
- If the error persists, check for jammed paper in the paper tray or paper path.
- If there is no jammed paper, contact a service technician for further assistance.
My ricoh pro1357ex getting off automatically while printing then on but please wait only in monitor
The issue you're describing with your Ricoh Pro 1357EX printer shutting off automatically while printing and displaying the message "please wait" on the monitor, could be caused by several factors. Here are a few steps you can try to troubleshoot the problem:
- Check the power source: Make sure that the power source is functioning properly and that there are no issues with the electrical outlet or power cord.
- Check the thermistor: Make sure that the thermistor is functioning properly and that it is not clogged or damaged. The thermistor is responsible for monitoring the temperature of the fuser unit and can cause the printer to shut off if it detects a problem.
- Check the fuser unit: Make sure that the fuser unit is functioning properly and that it is not clogged or damaged.
- Check for jammed paper: Make sure there is no paper jammed inside the printer. If there is, remove it carefully.
- Check the software: Make sure that the software and the driver of the printer are updated and installed correctly.
- Check the hardware: Make sure that the hardware of the printer is working properly.
- Consult the manual: Consult the manual for specific troubleshoot and service information for your Ricoh Pro 1357EX model.
If the above steps did not resolve the problem, it is best to contact Ricoh customer service for further assistance and repair options.
How to fix sc324-01 error in ricoh mp-c4503?????
Error SC324-01 on a Ricoh MP-C4503 copier typically indicates a problem with the laser unit. Here are a few things you can try to fix this error:
- Check the laser unit for any visible damage or debris. If you find any, remove it and try turning the copier on again.
- Check the laser unit connectors to make sure they are securely seated. If they are loose, try tightening them and see if that resolves the issue.
- Check the laser unit cable for any visible damage. If you find any, try replacing the cable and see if that resolves the issue.
- If the error persists, try resetting the copier by turning it off, unplugging it, and waiting for a few minutes before plugging it back in and turning it on again.
My Ricoh mp5000 is displaying Please Wait
If your Ricoh MP5000 printer is displaying the "Please Wait" message, it may be due to a problem with the printer or an issue with the print job. Here are a few things you can try to fix the issue:
- Restart the printer: Sometimes a simple restart of the printer can fix minor issues. Turn the printer off, wait a few minutes, and then turn it back on again.
- Check for errors: Check the printer's control panel for any error messages or codes. These messages can help diagnose the problem.
- Cancel the print job: If the "Please Wait" message is displayed while a print job is in progress, try canceling the print job. You can do this through the printer's control panel or by using the printer's cancel function on your computer.
- Check for paper jams: If the "Please Wait" message is displayed while the printer is attempting to print, there may be a paper jam. Check the printer for any jammed paper and remove it if necessary.
If these steps do not fix the issue, there may be a more serious problem with the printer. In this case, it is recommended to contact Ricoh customer support or a printer repair technician for further assistance.
How to fix error sc556 ricoh printer
1. Check if the fusing unit is properly set and connected to the main frame. 2. Check if the pressure roller thermistor connector is firmly connected
Ricoh 301 error sc 547-00
Error code SC547-00 on a Ricoh printer typically indicates a problem with the fusing unit. Check for any loose or damaged connections and make sure the fusing unit is properly seated. If the error persists, you may need to replace the fusing unit.
Not finding what you are looking for?