Top 20 Ricoh Aficio 1018D All-In-One Laser Printer Questions & Answers

Could be photoconductor gears are bad will have to replace unit or fuser unit you will have to decide which one first

Remove all paper from unit and carefully check in corners for a paper jam or staple/Paper clip

samply clean exposure glase and mirrors carfuly

get in user tools and sigen in as supervisor and change password

Try admin and leave password blank if that doesn't work then log on to web monitor . Open your web browser ie or Firefox doesn't matter enter IP address in browser then log in as supervisor no password and change name and password

first do u hv a scanner and printer connection board in ur machine.if not its imossibal to work u must get one and install it.

just clean mirrors and expsure glas

replace the thermistor and thermostatic some time maye be power supply

Go to the manufacture's web site and download your modal's driver that is appropriate to the operating you use, don't forget to install it! If you use a recent version of Windows you might be able to automatically install a driver directly from the 'printing' section of the 'control Panel' or the 'Device Manager' but older printers can be a problem, especially on newer versions of Windows. There are driver disks available but it might be a bit of pot luck. Try to avoid websites that expect payment.You could try an organisation called 'CUPS', they are reputable and you might be lucky.

Unit needs taken aprt andcleaned good and rollers too.

sc194 is an error with the scanner. It could be a bad exposure lamp, but it could also be a circuit board that needs to be replaced (either the SBU board or BICU board).

Your fuser and drum and toner hopper unit needs to be rebuilt/replaced. approx $1200 job.

clean both corona wires or replace it(tranfer and charge carona)

The 1018 series did not have USB. IF your machine has the network print option then it would only have a serial connection or an ethernet port. Should be on the right back corner. If it is not there then it may not have the print option.

194
B SBU White Level Detection Error
The automatic SBU adjustment failed
twenty times consecutively.
• Exposure lamp defective
• Dirty white plate
• Incorrect position or width of white
plate scanning (☛ SP4-015)
• BiCU board defective
• SBU board defective

Problem with the scanner. Check the white registration strip. and clean the mirrors. normally works.

Replace Polygon Mirror Motor

If you go into User Tools and select System Settings (or System Features, can't remember which one), there is a tab for Interface settings, and under that tab you should be able to view the IP address.

On some copiers (not sure if the 3260 has it) there is a tab on the bottom of the main Copy screen that says System Status -- if you touch that tab you should see the IP address.

drum got damaged and wants replacement

hello toner number is ricoh 1220D