20 Most Recent Ricoh Aficio 2027 All-In-One Laser Printer Questions & Answers

SC542 is a warm up error from the fuser.

SC 870 is an address book error.

Turn the power off on the copier. Wait 30 seconds and then turn the power back on. See if it goes away.

Let me know if it doesn't.

Ricoh Aficio... | Answered on Jan 26, 2019

El c?digo de error SC 990 tambi?n puede estar asociado con tiempo de mantenimiento, te sugiero que reemplaces el PCU o repares tu PCU actual.

Ricoh Aficio... | Answered on Aug 28, 2017

Hi, i recently got this error on Ricoh Aficio AP 610N

and This was the Fix..

0.- Hold on your breathe...
1.- Turn Off the printer.
2.- Press "ONLINE and SCAPE" buttons..
3.- without stopping pressing them (ONLINE and SCAPE) TURN ON THE PRINTER.. and wait about 10-15 seconds and Service menu show up.. after this.. release the buttons...
4.- Go to.. Engine Maintenance... Enter..
5.- Search for SP5810 (Fusing err clr) and Enter.
6.- Accept the change and enter...
7.- Turn off the printer...
8.- Finally turn on the printer and try to print something :)
9.- if the printer works.. you can breathe again :)

Thanks to everybody..

Ricoh Aficio... | Answered on Feb 19, 2016

Not loading toner is usually due to worn out dev gears in the PCU. Call your nearest Ricoh agent for a service call. A technician must come and fit new dev gears. Or the toner hopper is dirty and needs cleaning.

Ricoh Aficio... | Answered on May 29, 2015

Get printer box on the side where you connect your LAN cable you will find some SD ram slots it has one screw open and slot your card in while the machine is switched off

Ricoh Aficio... | Answered on Sep 01, 2014

please call a technician to fix hard drive on the machine for you and you will not face this problem again

Ricoh Aficio... | Answered on Jun 05, 2014

turn off in user tools system settings admin settings

Ricoh Aficio... | Answered on Oct 02, 2013

Application function selection error
The application selected by a key press
on operation panel does not start or
ends abnormally.

• Download the firmware for the
application that failed
• An option required by the application
(RAM, DIMM, board) is not installed

Re-seat the RAM on the controller board

Ricoh Aficio... | Answered on Apr 15, 2013

you need to go into the sp mode and turn the NIC unit on and make sure the USB is off. Won't work until you do.

Ricoh Aficio... | Answered on Mar 16, 2013

Not finding what you are looking for?
Ricoh Aficio 2027 All-In-One Laser Printer Logo

121 questions posted

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts


Level 3 Expert

1363 Answers


Level 3 Expert

13434 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Aficio Ricoh

  • Aficio Ricoh

Most Popular Question


  • Office Equipment & Supplies