20 Most Recent Ricoh AC104 All-In-One Laser Printer - Page 3 Questions & Answers

Here are some common issues and troubleshooting steps to help you identify and resolve the problem:

1. Wi-Fi Connection: Ensure that both your laptop and the Ricoh printer are connected to the same Wi-Fi network. If they are not on the same network, they won't be able to communicate with each other.
2. Printer Wi-Fi Setup: Make sure the Ricoh printer's wireless feature is enabled and set up correctly. Refer to the printer's user manual or support documentation for instructions on how to set up the Wi-Fi connection.
3. Network Firewall or Security Settings: Check your laptop's firewall and security settings. Sometimes, overly strict firewall settings can block communication between the laptop and the printer. Temporarily disable the firewall and check if the connection works. If it does, adjust the firewall settings to allow communication with the printer.
4. Printer Driver: Ensure that you have installed the correct printer driver for your Ricoh printer on your laptop. The driver is essential for establishing a proper connection and enabling communication between the laptop and the printer. Visit the Ricoh website to download and install the latest driver for your printer model and your laptop's operating system.
5. Printer Offline: Check the printer's status on your laptop to see if it is set to "offline." If it's offline, right-click on the printer in the "Devices and Printers" section of your laptop's Control Panel and select "Use Printer Online."
6. Wi-Fi Signal Strength: Verify that the Wi-Fi signal strength on both your laptop and the Ricoh printer is strong enough for proper communication. If the signal is weak, consider moving the printer or laptop closer to the Wi-Fi router or using a Wi-Fi extende

Here are some steps you can take to troubleshoot and potentially resolve the issue:

1. Power Cycle: Turn off the printer and unplug it from the power source. Wait for a minute or two, then plug it back in and turn it on. Sometimes, power cycling can clear temporary errors.
2. Check for Paper Jams: Ensure there are no paper jams or obstructions in the fusing unit or paper path that might be causing the error.
3. Allow Time to Cool: The "Service Call 551" error could occur if the fusing unit is overheating. In such cases, allow the printer to cool down for some time before attempting to use it again.
4. Reset Printer: Some printers have a "Clear" or "Stop" button that can be used to clear error codes. Press this button to reset the printer and see if the error clears.
5. Check Fusing Unit: Inspect the fusing unit for any signs of damage, such as burnt or worn-out components. If you notice any issues, the fusing unit might need to be replaced.
6. Verify Thermistor: The thermistor may be defective or dirty. Check the thermistor's connections and clean it if necessary. If the thermistor is faulty, it may need to be replaced.
7. Update Firmware (if applicable): Check if there are any firmware updates available for your Ricoh SP203SF printer. Updating the firmware may address known issues and improve the printer's performance.

Question edited for clarity. You can try this first. Unplug the machine from the wall socket. clean the contacts on the toner cartridge, and the contacts on the machine with Isopropyl Alcohol. Was it a Genuine Ricoh cartridge or a hinky mall refill. You might need to buy a Reset Chip. https://www.ebay.com/itm/283097725226 https://www.google.com/search?q=ricoh+sp+c261sfnw+black+toner+error+fix ..

https://www.fixya.com/support/t29784277-afficio_mp2000_faint_copies_ot_new https://www.fixya.com/support/t26524106-ricoh_mp_2000_photocopying_very_faint

Remove all the trays and then Reset it. https://www.google.com/search?q=ricoh+201+spf+reset ..

Question edited for better English and spelling of 'mode'. Question moved to maker category.

How to get into service mode on a Ricoh copier or printer

Bizcopier.my https://bizcopier.my > Information To enter service mode, press the yellow Clear button, then 1-0-7. Then hold down the red Stop button for about 5 seconds. The screen will shift to a menu.

How to get into service mode on a Ricoh Aficio copier or ...

Blogger http://tech-in-check.blogspot.com > 2018/02 > how-to... Feb 2, 2018 - To enter service mode, press the yellow Reset button, then 8-0-6-1-8-2. Then hold down the red Clear/Stop button for about 5 seconds. The screen ...

MP C401 Service Mode - Ricoh

HelpOwl.com https://www.helpowl.com > MP-C401 > Research > sea... Hi,I have a RICOH Aficio SP C242SF. Does anyone know the key sequence to enter service mode? Thank y... (Posted by sunnykhh 7 years ago). Ricoh Aficio SP ...

service log in for mpc401

Copytechnet https://www.copytechnet.com > forums > 113213-serv... Oct 26, 2016 - I found the answer in 30 seconds by putting "ricoh service mode new" into google. It's not exactly secret information so trying to hoard it won' ... New RICOH SP MODE CODE-read this Jun 6, 2014 Thread: Reset service mode - Copytechnet Feb 20, 2020 Ricoh Aficio SPC242SF service mode login - Copytechnet Mar 28, 2013 Ricoh MP501 Cant access interface settings or service mode Dec 8, 2022 More results from www.copytechnet.com different model, but try it.

The are no firmware updates for the C401. https://www.ricoh-imaging.co.jp/english/r_dc/download/ Software and Drivers only

MP C401SP/C401SRSP Downloads

Ricoh http://support.ricoh.com > model > mpc401 > mpc401 This utility searches for available printing devices on the network, downloads the applicable printer driver through Internet and installs it to the PC with ...

Support and Downloads

Ricoh https://www.ricoh.ca > en-CA > support-and-download Discover all the forms of support that Ricoh CA offers, including downloads, maintenance services, developer support, safety data sheets and much more.

• MP C401 Colour Laser Multifunction Printer

  https://www.ricoh.ca > equipment > printers-and-copiers The RICOH MP C401 Color Laser Multifunction Printer (MFP) simplifies everyday tasks by combining fast color output, advanced scanning and optional faxing to ... ..

To re-attach the output tray long piece on the Ricoh SP C360DNw, follow these steps: 1. Turn off the printer and unplug it from the power source. 2. Locate the output tray and the long piece that needs to be re-attached. 3. Align the long piece with the slot on the output tray and gently push it in until it clicks into place. 4. Turn on the printer and check if the error message has disappeared. If the error message persists, try removing and re-installing the paper tray to ensure that it is properly seated. If this does not resolve the issue, there may be a problem with the sensor or other internal components of the printer, and it may require professional servicing.

The error code SC312-05 on a Ricoh Versafire CX7100 indicates an issue with the paper transfer unit. Here are some potential solutions to address this error: 1. Check for paper jams: Open the printer's doors and inspect the paper path, including the transfer unit, fusing unit, and paper trays, for any paper jams or obstructions. Clear any jammed paper carefully. 2. Clean the transfer unit: The transfer unit may accumulate toner or debris over time, leading to issues. Follow the manufacturer's instructions to clean the transfer unit thoroughly. Use a soft, lint-free cloth and be cautious not to damage any components. 3. Check for damaged or worn-out parts: Inspect the transfer belt and roller for any signs of damage, wear, or contamination. If you notice any issues, such as tears or excessive wear, the transfer belt or roller may need to be replaced. 4. Reset the printer: Power off the printer, unplug it from the power source, wait for a few minutes, and then reconnect and power it back on. This action can sometimes reset the printer and clear temporary errors. 5. Update firmware and drivers: Ensure that your printer has the latest firmware installed. Visit the Ricoh support website and check for any available firmware updates specific to your printer model. Additionally, verify that you have the latest printer drivers installed on your computer. 6. Contact technical support: If the error persists after performing the above steps, it is recommended to contact Ricoh's technical support or consult a professional technician with expertise in Ricoh printers. They can provide further assistance and guide you through specific troubleshooting steps or arrange for on-site service if needed. Remember to exercise caution when performing any maintenance or repairs on your printer. If you are uncertain or uncomfortable with the process, it is best to seek professional assistance to avoid any further damage to the printer.

• Resetting the Printer's Settings

  http://support.ricoh.com > view > softwarepcl > unv Click the [Reset Settings] tab on the administrator settings page to reset the printer's settings. Web browser screen illustration. Reset Settings. Item.

Try doing a reset on it. If that doesn't work, take it to a Ricoh Service Centre. https://www.google.com/search?q=Ricoh+MP+171+restart+due+to+functional+error ..

Question edited for clarity and formatting. Well it is the correct code for fans, but other parts as well connected to the fan.

• Code: 532
• Description: Laser unit fan error The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.
• Causes:• Defective laser unit fan • Disconnected or defective harness • Defective drive board • Defective BCU
• Remedy:1. Check or replace the harness. 2. Replace the laser unit fan. 3. Replace the laser unit fan motor. 4. Replace the DRB. 5. Replace the BCU.

Ricoh MPC2551 - Error Code: 532

PrintCopy .info https://printcopy.info > brand=Ricoh > code=532 Code: 532; Description: Laser unit fan error. The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected. Did you reset the code?

SOLVED: My Ricoh infotec IS 2146 is showing error scan 144

Fixya https://www.fixya.com > ... > Ricoh Sep 9, 2022 - If your Ricoh Infotec IS 2146 is showing error code scan 144, this could indicate a problem with the scanner motor or its wiring.

• SOLVED: Error code sc144

  https://www.fixya.com > ... > Ricoh > Aficio Check the flat cable between Main board & scanner unit. If cable is seen OK & properly connected then SBU or Main board may be defected. Posted on Jul 18, 2013.

Ricoh AP3850C - Error Code: SC556

PrintCopy .info https://printcopy.info > brand=Ricoh > code=SC556 Remedy: 1. Check if the fusing unit is properly set and connected to the main frame. 2. Check if the pressure roller thermistor connector is firmly connected. 3 ...

I have a Ricoh ap3800c showing Error Code SC556. I did the

JustAnswer https://www.justanswer.com > office-equipment > 6b8... Feb 28, 2012 - 1/ Service manual: SC556 : Item ;Pressure roller fusing lamp temperature fluctuation. Definition: The pressure roller temperature changes by +- ... 1 answer · Top answer: Hi, I'm a moderator for this topic and I wonder whether you're still waiting for an answer. ...

richo sp201n sc556

Copytechnet https://www.copytechnet.com > ... > Ricoh Jan 11, 2020 - dears i have sp201n printer gives red light then tried to enter the service mode using the pc to make sc fuser rest but it didnt work by the ...

Fax Problems - Ricoh SP 210 SU User Manual [Page 217]

ManualsLib https://www.manualslib.com > ... > User manual Ricoh SP 210 SU Manual Online: Fax Problems. ... Show thumbs Also See for SP 210 SU: ... If the problem persists, contact your sales or service. ..

Question edited for clarity. https://www.google.com/search?q=ricoh+sp300dn+red+alert+light+error ..