20 Most Recent Cisco 1811 Router - Page 5 Questions & Answers

Check what version of software do you have. Do "dir" command and look at the file name. If it contains "K9" in the name, then it has "crypto" functionality, if it doesn't, then you need to find it (however it will be quite a challenge, as these routers are end-of-life for a decade...)

Good luck,
Mike ' CCNP, CCDP, CCSP, CCVP, etc.
Cisco Compatible Headset Adapters for 7940 7960 etc

Cisco Computers... | Answered on Mar 30, 2017

As long as it has Bluetooth.

Cisco Computers... | Answered on Mar 28, 2017

Ik denk dat je een cursus hoe beveilig ik mijn netwerk moet volgen. Er is zoveel mogelijk op het gebied hacken, dat je goed op je tellen moet passen bij het opzetten van een draadloze verbinding. Eigenlijk moet je de naam van de verbinding al zo instellen dat niemand kan zien welk merk en of model router het is. Maar ook je eigen naam mag niet voorkomen. Dan moet je tegenwoordig aan aardig wachtwoord verzinnen. en je ervan bewust zijn dat sommige dingen toch als klare tekst door de lucht gaan.
Ik wens je sterkte bij het oplossen van alle zaken.

Cisco Computers... | Answered on Mar 26, 2017

Greatings !
I put WORKGROUP within the domain name field of the Network tab.
Speedtest moved from 10Mb to 100Mb that is the maximum speed provided by my cableBox (Numericable).
Very good

Thanks a lot to Kasper Mikkelsen

Cisco Computers... | Answered on Mar 22, 2017

We can answer specific questions for you as long as you are specific. Broad questions are difficult to answer in a reasonable amount of time but if you ask us to explain database normalization, that can be handled in a reasonable amount of time.
When you graduate, you will likely get a job with a smaller company. This is simply because there are more of them then larger companies. Smaller companies mean smaller networks which means less work so they will not be able to keep you busy working only on the network. The solution is to either hire somebody part-time or to hire somebody with a related talent that they need. That is where the DB knowledge comes in handy.

Cisco Computers... | Answered on Mar 20, 2017

Configuration? What type of configuration / settings would you like to know? Anyhow , just use the link below and it will redirect you to the page of your Cisco Service Manual, where you can see the complete image instruction /setup / configuration of your cisco wap4410N


I am sorry , for the answer that I provided . Since I dont have an idea for the configuration that you needed much better if your going to use the link that provided because its very helpful thanks

Cisco Computers... | Answered on Feb 05, 2017

Cisco doesnt have any file aside from the ISO file that you can download on their website .

2 ways to download and install the driver

1 Download and install an ISO converter software and use or click the link for the driver software


and use this site to download and install the ISO converter https://www.crystalidea.com/zip-to-iso-converter-convert-zip-archives-to-iso

2. USE window update
Updating the Windows Driver

Perform the following steps to update the LSI MegaSR driver for Windows or to install this driver on an
existing system booted from a standard IDE drive

Step 1 Click Start, point to Settings, and then click Control Panel

Double-click System, click the Hardware tab, and then click Device Manager. Device Manager starts.
Step 2
In Device Manager, double-click SCSI and RAID Controllers, right-click the device for which you are
Step 3
installing the driver, and then click Properties.
On the Driver tab, click Update Driver to open the Update Device Driver wizard, and then follow the
Step 4
wizard instructions to update the driver

Cisco Computers... | Answered on Feb 05, 2017

user name cisco
password cisco

Cisco Computers... | Answered on Sep 25, 2016

What about it?

Cisco Computers... | Answered on Aug 02, 2016

Please describe the router and the lights that are blinking. It could just be activity lights.

Alternately you can look up your router and probably download the manual, which should explain what the lights are and what they indicate.

Cisco Computers... | Answered on Aug 02, 2016

On the back of the router is a reset button. Press that in for 5-10 seconds. It will reset to factory specs. Once you reset the Valet Hotspot, all of its customized settings (network name, wireless security, etc.) will be erased and the hotspot's IP address will be reverted back to, with a default password of admin and no username.

Cisco Computers... | Answered on Aug 02, 2016

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.

Cisco Computers... | Answered on Apr 02, 2016

Not finding what you are looking for?
Cisco 1811 Router Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers


Level 3 Expert

4372 Answers

Jax Planet
Jax Planet

Level 2 Expert

923 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cisco Computers & Internet

  • Cisco Computers & Internet

Most Popular Question

not login con 0 port not text lost

  • Computers & Internet