20 Most Recent Cisco 857 Router (CISCO857K9) - Page 9 Questions & Answers

It is due to some internal problem with setting. first, resetting the router and update wireless adapter driver on the device and change your wireless settings. Downloading the latest firmware for your router if possible. I think it will give you some ideas.

Press 2 keys on Keyboard - the Function (Fn) key and the F2 key to toggle the wireless card on and off.

Unfortunately, the only way around this is a factory reset :-/ Before you reset the box, make sure you have your PPPoA or PPPoE usernname and password from your ISP as well as PVC settings. You will need these to get the broadband working again.

Nope. You know this cuz... you get an error "can't connect to the network" or you can't connect to the internet? Can you connect wired? The modem should be plugged into the router and the PC should be plugged into the router. A cable should be run from modem's internet port to router's internet port. Plug the PC into one of the router's ports labeled #1-4. Got the right passwords for your network? Are they saved in your devices? Has your password been changed? If this is a Cisco/Linksys router you can check the router settings by connecting to the router (wireless or wired) open a browser and typing 192.168.1.1 in the address line. The default User ID is <blank> and PSW is admin. This should take you to a menu where, under the Wireless Tab, you can change your SSID (broadcast name) type of security you have and password. If you have cable internet, you should change the mode to "G Only" or "G and N" if this is an N router and you have N devices. You probably don't have any A or B devices and "Mixed" will cause your router to run at 10Mbps instead of 50Mbps. If you have DSL or ADSL it won't matter cuz your internet won't do over over 3Mbps. You should also check for the Max number of wireless users. Some DSL ISPs will change that number to 5 or less to keep you from using too many of their resources. You should change that to 50.

http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/wrv200/administration/guide/WRV200_V10_UG_A-Web.pdf Try the manual

This is an enterprise AP and needs to run with a Cisco router.

Sir I suggest you follow below link to resolve your Belkin Router issue: http://www.cisco.com/c/dam/en/us/td/docs/video/at_home/Set-Tops/DTA/4030042_B.pdf Troubleshooting Router Interfaces and Modules Issues Or In Case You still Nedd online Cisco Router Help Then I Suggest you follow us on for CISCO Router Support

There is no default username or password, they come blank from the factory http://www.cisco.com/en/US/docs/video/at_home/Cable_Modems/2300_Series/4042831_A.pdf

While you might be better off leaving it block, :) I would tell you to go and edit her number and somewhere in your contact list on her number there's a spot that says blocked Un block her.

The wifi does not broadcast? Check in the setup page to make sure wifi is turned on and its setup to broadcast (It is possible to set it up to broadcast "invisibly" so strangers can't see the network and use your internet) RTFM