20 Most Recent Samsung SCX-5315F All-In-One Laser Printer - Page 2 Questions & Answers

0helpful
1answer

Prints blank in black

your printer high voltage power supply board voltage is not correct .so please check the hups board
10/24/2015 10:34:03 AM • Samsung SCX... • Answered on Oct 24, 2015
0helpful
1answer

Poor scanning results samsung scx all in one

clean scanner
10/2/2015 7:09:39 PM • Samsung SCX... • Answered on Oct 02, 2015
0helpful
1answer

Pcl error SCX 5835

driver problem,replace with fresh
10/2/2015 7:07:01 PM • Samsung SCX... • Answered on Oct 02, 2015
0helpful
1answer

Paper jams before entering the fuser

possible cause bad paper pikup-check roller, separation pad, check toner cartidge , is t moving tight? last fuser
10/2/2015 7:04:58 PM • Samsung SCX... • Answered on Oct 02, 2015
0helpful
1answer

Why is Samsung SCX-3201G printing blank pages even when toner is refilled?

replace toner chip/ else try with another cartridge.else check laser unit
10/2/2015 6:44:32 PM • Samsung SCX... • Answered on Oct 02, 2015
0helpful
1answer

How can I replace the rear transfer roller?

SCX model???
9/16/2015 2:15:14 PM • Samsung SCX... • Answered on Sep 16, 2015
0helpful
1answer

How need to reset page counter. Please help

Dpends on model ,u need to share the same.
8/13/2015 2:05:55 PM • Samsung SCX... • Answered on Aug 13, 2015
0helpful
1answer

Reset counter SCX 4300

need to use third party chip resetter or chips
8/13/2015 9:53:52 AM • Samsung SCX... • Answered on Aug 13, 2015
0helpful
1answer

Has a lsu error

Dear Ian Pl. open the LSU and clean the optical path and polygon motor with a dry cotton lint free cloth. If not resolver then replace the LSU. Thanks.
3/18/2015 3:27:30 PM • Samsung SCX... • Answered on Mar 18, 2015
0helpful
1answer

Has a lsu error

LSU stands for laser beam scanning unit. You will most likely have to replace it.
3/18/2015 3:27:37 AM • Samsung SCX... • Answered on Mar 18, 2015
0helpful
2answers

Black line vertical while scan and photocopy a document

does it happen when you put it on the glass or only thru the document feeder? if only when you use the doc feeder then it is something on the slit glass the small piece of glass about an inch wide next to the big sheet of glass. some times ink from a pen od dirt gets baked on the slit glass. it can be hard to get off but if you look closly then you can see it and clean it off.
3/9/2015 3:39:52 PM • Samsung SCX... • Answered on Mar 09, 2015
0helpful
1answer

HOW TO UNLOCK THE SCANNER

Dear You have not mentioned the model no. However certain model of SCX (viz-5315,6122 etc.) has a scanner lock bellow the platen body. That might have locked. Other has no locks, since no movement of CIS(scanner) results scanner lock. Mostly the platen cover and the scanner assy. realigned solve this problem. Also in case of small A4 SCX printer, slightly knock with your palm at both side of platen may sometimes over come the problem, make sure after your try machine should OFF and ON. if the above are not working, then the printer needs hardware replacement may be, scanner drive motor or Main PBA. Thanks.
2/26/2015 3:09:18 AM • Samsung SCX... • Answered on Feb 26, 2015
0helpful
1answer

I have samsung scx 3201 g printer red light come and scanner problem

Dear Put a cello tape on the chip area only, at right side of the cart. Tell me about the scanner problem. Thanks.
2/10/2015 12:47:37 PM • Samsung SCX... • Answered on Feb 10, 2015
0helpful
1answer

Samsung scx 4300 error paper jam1 install toner

Sir there is a sensor lever at middle of the engine base, under the toner cart. when the cart inserted it has to pushed half and other half is for paper jam-1 error. Pl. check the lever-check the smps photo interrupter-check the mech alignment of the lever- also check the cart hold lever(left-right) pressure (found on top of the engine base). Thanks.
12/25/2014 5:11:21 PM • Samsung SCX... • Answered on Dec 25, 2014
0helpful
1answer

Paper Jam at bottom of duplex path

are you running multiple pages when this happens? try just one double sided copy and see if it does it then also. it could be caused by a paper path issue some where else in the machine.
10/6/2014 3:28:10 PM • Samsung SCX... • Answered on Oct 06, 2014
Not finding what you are looking for?
Samsung SCX-5315F All-In-One Laser Printer Logo

Popular Tags

12 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Norman Weimar
Norman Weimar

Level 3 Expert

7035 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

SCX Samsung

  • SCX Samsung

Most Popular Question

blank copy print good

  • Office Equipment & Supplies
Loading...