Samsung ML 2010 Laser Printer - Answered Questions & Fixed issues


Hi,
I noticed that the orange cancel button was jammed down. I couldn't prise it up, but was able to release it by tapping firmly the top of the printer near the button. As soon as it popped up - the buttons stopped flashing

Samsung ML 2010... | Answered on May 06, 2019 | 5,498 views


i found it here:

http://www.samsung.com/us/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=&prd_mdl_cd=&prd_mdl_name=ML-2010

Make sure to look for the little "driver" tab if all you see is the guides.

It's hard to see.


Samsung ML 2010... | Answered on Jan 15, 2019 | 159 views


not a memory problem as it prints
the problem will be in the spooling settings as it determines if it has to wait for more data to print or what to happen
try going to the printer properties and settings and seeing about spooling and queueing times

Samsung ML 2010... | Answered on Feb 21, 2018 | 80 views


Below link has open source user guide for samsung ML 2010 Printer, Hope it helps you! Good Luck

http://www.samsung.com/in/support/model/ML-2010/XIP

Samsung ML 2010... | Answered on Feb 18, 2016 | 44 views


The problem seems to be with the solenoid of paper path assly
or replace the complete assly

Samsung ML 2010... | Answered on Aug 19, 2015 | 107 views


I've disconnetected my ML-1630 from Apple Time Capsule router and connected it directly to my computer USB port and it worked again !

Samsung ML 2010... | Answered on Aug 11, 2015 | 123 views


Dear
remove completely and reinstall again.
Thanks.

Samsung ML 2010... | Answered on Mar 04, 2015 | 69 views


if U are asking how to find out how much toner is left in the cartridge Hold down the orange button on the top of the printer until the green light starts flashing and it will print out a page with that info

Samsung ML 2010... | Answered on Feb 03, 2015 | 32 views


I could not find that error code, but here's the Diagnostic Tool from Samsung's Website:

What Is The Samsung Printer Diagnostics Tool

Samsung ML 2010... | Answered on Jan 26, 2015 | 371 views


You can enable mDNS in your admin page and connect the mac and printer in same network and then you can setup the printer in mac from settings -> printers.

Samsung ML 2010... | Answered on Jan 20, 2015 | 65 views


Rollers can wear out and lose traction. You can get spraycans of "rubber rejuvenator". Or it may be that the roller is slightly out of position somehow.

As for toner, some printers provide "feedback" to the computer of how much toner is left and you would find this in the Print System Preference "Options & Supplies".

If it doesn't, then the printer may display a "Low toner" warning, but these are usually just based on page count, rather than actual levels.

Realistically, you sometimes can't tell until the toner starts going grey and streaking. It's always a good idea to make a note of the page count on the printer at the start of each new cartridge, to see how many sheets your usage gets per cart.

Try to also consult the manual here: Samsung ML 2010 Manual

Samsung ML 2010... | Answered on Nov 12, 2014 | 423 views


Issue seems not to be in IE .Check with connection of printer,tray empty and online error belongs to printer setting. Try to also consult the manual here: Samsung ML 2010 Manual

Samsung ML 2010... | Answered on Nov 12, 2014 | 287 views


Hi

Issue seems not to be in IE .Check with connection of printer,tray empty and online error belongs to printer setting. Try to also consult the manual here: Samsung ML 2010 Manual

Samsung ML 2010... | Answered on Nov 12, 2014 | 273 views


plasde hold the online button in 5 second &after holding please wait 2 second printer demo page&supplies status page is comming

Samsung ML 2010... | Answered on May 06, 2014 | 29 views


hi your check the usb cable or pc port select other usb

Samsung ML 2010... | Answered on May 06, 2014 | 34 views


Two reasons I could think of

Low toner.

Pre-set counter on cartridge reaches limit.

Try removing the toner cartridge and powering the unit on.

While unit is plugged in, re-install cartridge.

Not knowing how old the printer is a the amount of use, it is had to answer

Samsung ML 2010... | Answered on Apr 30, 2014 | 376 views


why do I have to pay for it when I just bought it for two years I had too wipe my pc clean I downloaded driver detective and it told me to register by credit card or pay pal why cant I just put my email in and get it working I should not have too pay for it when I just paid for it 3 weeks ago

Samsung ML 2010... | Answered on Feb 26, 2014 | 42 views


go to samsung website www.samsung.com

Samsung ML 2010... | Answered on Oct 18, 2013 | 24 views


My printer was able to print an "INTERNAL ERROR - FALSE, Position: 0x1227e (74366)" error message as well as a test page, but not documents sent to print.

However, the problem was fixed once I switched to another USB port as the person above mentioned. So for any other people with similar problems, try that! In addition to power cycling the printer (I did that first)

Samsung ML 2010... | Answered on Oct 08, 2013 | 5,304 views

Not finding what you are looking for?
Samsung ML 2010 Laser Printer Logo

512 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6220 Answers

The Knight
The Knight

Level 3 Expert

76466 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...