Top 20
Samsung ML 2010 Laser Printer - Page 5 Questions & Answers
Online/error red led glows continuously and the
Just to make sure it's not a heat problem, leave it unplugged for an
hour to let it cool down, then power it on again. If you get the same
results, then it needs to be set up for service.
In ready mode press and hold stop button for 5 seconds.If it prints Demo page then there might be the issue with the network connection. Please uninstall and reinstall print drivers on your PC and restart your system.
Its prints one page at a time and a pop up appears
You need to change the default tray. Thats the reason its printing one page at a time. You can change the default tray to draw paper from two ways, by using the controls on the printer itself or by changing the settings when you print a document.
To change it on the printer, go to menu on the printers keys and scroll the options until you find the print settings. Use the up and down arrows to scroll and press enter or OK when you find print settings. Continue to scroll until you see the default paper tray and change it from the manual feed choice to the default paper tray.
If changing from the print settings in the computer, when in a document that you want to print go to file at the top of the page and then print and click on preferences. Click the tabs at the top until you see the paper tray that is currently being used and click the arrow next to it to change it to another. Then click "ok" and close everything.
I have samsung ml 2010
there is a problem with the
detection of toner, could be:
- the toner cartridge not set in the printer correctly
- the toner cartridge is faulty (replacing the cartridge may fix)
- a part in the printer is faulty and is not detecting the toner, or toner cartridge
I'm not exactly familiar with where the toner is detected but you could use an 'air brush' to clean the printer, as perhaps the part that contacts with the cartridge is dirty.
You could give the toner cartridge a little side-to-side shake as this may even out the toner and activate the part that detects the toner.
Page is not loading during printing
Occasionally, paper cannot be load during a print job.
Some of causes include:
• The tray is overfilled.
• The front cover has been opened during a print job.
• Paper that does not meet paper specifications has been used.
• Paper that is outside of the supported size range has been used.
If a paper jam occurs, the On Line/Error LED on the control panel lights red.
Find and remove the jammed paper. If it is invisible, look inside the printer.
Note: U would find the complete instructions along with the screen shots in the below link
http://tinyurl.com/notloading
Best of Luck
My printer is not printing as sharp as it used to,
Hi:
Try changing the defuser unit, this is the unit that heats paper during the printing, before sending unit to the toner area. The defuser is located in the back of the printer and usually comes out with two screws or clamps on either side, make sure the printer is cool or you have'nt printed for a while as the fuser can be very hot. Examine it for discoloration or pits or smears, all of which can cause poor printing results, The defuser may not be heating the paper enough.
I have a samsung ml
unplug then plug it in again. after u hook it up with the computer try turning it on and off before u start printing!
How do i install my printer without having the
Hello if you go here http://www.samsung.com/au/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=&prd_mdl_cd=&prd_mdl_name=ML-2010 then select downloads then driver link then download the right one for your version of windows. Once downloaded open file to start extraction and install of the driver
I have Samsung ml mono
Hey!Go to www.samsung.com and download the universal print driver for windows 7 and install it!Then connect the printer and it will install the printer automatically!!Good Luck!
Printer releasing steam after each page printed.
If steam is being released then the paper you are using is damp with moisture.
The fuser in the printer fuses the toner onto the paper, that process require a fair amount of heat.
Dry paper does not give off steam, use fresh dry paper.
My printer pulls multiple sheets at once.
Hello,
yo have to:
1. Clear paper pick up roller whit wet cloth or alcohol
2. Clear separation pad (located under pick up roller) using same way as pick up roller.
Good luck
Not finding what you are looking for?