Top 20
Samsung SCX-4100 All-In-One Laser Printer Questions & Answers
Problem for scx 4100 printer
the fuser is the part that melts the toner on the page if you open the door on the back the part you see with the two rollers ione is orange the other has a teflon coating on it this is the fuser. they are no longer available
Fuser unit failure #u1-2113
Turn off the printer and open the printer back door. Use a spot light and give look inside properly. Make sure there no paper. Some time small part of the paper creates the problem. So you can do one thing after open the back door, top side etc make the printer upside down etc. So if anything inside that's will come out. After cleaning again connect it with PC and turn on. Now give a look. If you face same problem then Un-install the printer driver and software from the PC. Then restart the PC and Printer both. Now connect the Printer with PC via USB and install again the driver & software. Then try to print and let me know the result.
Is it worth if i
Hello,
This is actually a really neat printer and I have personally used one before. If you need a small portable multifunction printer this one is a great buy. You can purchase a slightly used one on amazon for $90.00 dollars. So consider the price compared to the one you are looking at. Also you have to think about how much you will be using this printer.The toner cartridges cost anywhere from $17-$25 dollars.
Keep the cost in mind but other than that this is a great printer.
Post back if you have any further question's or comments. Thank you for choosing Fixya!
I have a Samsung SCX-482FN
Hi
Did you try to set up again the printer once more if not, please set up or add the printer once more.
Please let me know if you need more help.
Samsung Printer SCX-4100
LSU Error
Laser Scanner Unit or LSU is what writes to the surface of the drum. The glass above the cartridge in the machine may be dirty. The mirror motor in the LSU could be bad or needs to be cleaned to spin better. The Laser diode may be faulty.
This is not a user-serviceable issue. You will need to contact Samsung for service. You can do it online via Samsung website or contact the vendor to see who will they appoint to service the printer to, especially if it is still under warranty.
I have a Samsung SCX
You must install not only the printer driver but also the scan driver and the management software. All 3 can be found here
http://www.samsung.com/uk/support/detail/supportPrdDetail.do?menu=SP01&prd_mdl_cd=&prd_mdl_name=SCX-4100&prd_ia_sub_class_cd=P
Uninstall everything you have tried now, reboot at least twice, run a registry cleaner like
http://www.eusing.com/free_registry_cleaner/registry_cleaner.htm
reboot once more and only then download and install the drivers and the associated software, in that order.
Not finding what you are looking for?