20 Most Recent
Samsung ML 1710 Laser Printer - Page 5 Questions & Answers
Horizontal lines appear every 4 inches on each
User manual page 6.17 says:
Horizontal streaks indicate improperly installed or defective toner cartridge. Try re-installing the cartridge.
http://downloadcenter.samsung.com/content/UM/200607/20060712143739406_ML-1710_English.pdf
Samsung ML-1710 Printer - see below
Try to put new cartridge in.If this doesn't fix the problem, it can be that the fusing unit heater roller teflon coating is worn out and this roller needs to be replaced.
How do i get the paper out; it is jammed with 2
With firm steady pressure pull the paper out. Take the paper tray out and see if its clear behind it . Open the rear feed and check it also. If necessary remove toner cartridge and check there.
The paper gets blocked evry time i start the
It could be that small pieces paper is still stuck in the rollers. Make sure also that the paper feeder is properly placed on its correct location. Other things you can do is to put some more paper on the tray. See if it will feed the paper.
Please post back if you still have any concerns.
INTERNAL ERROR - FALSE
at http://www.adassoft.com/en/linux/235-instalar-impressora-scx-4200-no-opensuse-110.html this problem is mentioned (on a suse 11.1, using the samsung-drivers) - the author thinks it's related with koffice - i have the same problem on a mandriva spring 2009 linux with samsung scx-4200R, but printing out of kooffice works fine for me, okular and thunderbird show me the above error (with version qpdl...2005). So far I've no idea how to fix that...if you use linux, one problem may be that first you need to install cups and sane, then the samsung driver packages.
I have a samsung ml-1710 laser printer. Was wrking
Power off the printer, disconnect/reconnect the printer cable, power on the printer, reboot your workstation.
If that doesn't work, in Control Panel - Printers, delete the icon for your printer. Disconnect the printer cable. Reboot your workstation and log in. Reconnect the printer cable and see if the printer is recognized. Install the printer driver.
How do I find the waste toner hopper?
There are 5 screws on top of the cartridge that have to be removed. Then there are 4 release clips (use small screw driver to release). The cover will come off and you can empty the entire cartridge.
Samsung ML 1710 won't print second page
i'm thinking it's a config-related problem. i've seen a comparable problem already. could you check the settings in the printer software? there is setting that says "print first page from different tray" if its box is checked, the printer wants to print the rest of the print job from another tray, and will block when there is no other tray available.
if you find this setting is not marked, then i propose to delete the printer driver and all settings and then downloading the most recent driver from the manufacturer's website and installing that one.
Where do I find the toner waste hopper
Hi, this printer should not have wast hopper at all.
Due our experience for the samsung printer the ML 1710 don't have it.
to refill this toner unscrew 5 top screws then open top cover you will find powder container refill it and re screw screws back.
If it have CHIP you need bought one if this toner done 2000 pages.
But I suggest bought compatible toner, it will helps you reduce messy job, the toner poweder is high risk if you are going to refill in your room it will caused health problem include cancer.
We don't have this toner at the moment currently.
Hope it help.
Not finding what you are looking for?