20 Most Recent
Questions & Answers
After printing one sheet the printer goes in to a
This series of Samsung printer has power supply issues. The problem you are describing is consistent with a failing power supply. They will commonly shut off after a page is printed and then come back on. 90% sure or better that you are going to have to have the power supply repaired. Do you have a local repair company? If so then just tell them that they need to replace the capacitors on the power supply board. It is about a $125 to $150 repair.
I have presonally seen and repaired this problem for several customers.
Good Luck and Thank You for using Fixya.
When i start My Samsung
There is a sensor at the paper output bin,and i think it something broken or else some paper particle stucked on that sensor.If you are familiar in servicing try to open and check the output bin for a sensor.Else get the printer for a service center for servicing.It will cost a low price.
I wish you best of luck
What's your problem?showing the problem
If this is seen to be an hardware issue then it will be needed to replace the motherboard. As you have not mentioned the details of the fault and only that it an hardware issue , it seems to be beyond the scope of DIY unless a board or toner replacement is done to confirm.
Paper jam 2 error
There is a little plastic lever/flag which detects the paper at the
rear, just after the heat section. I think on this model it can just
about be seen by opening the rear door, it should be in the middle of
the black lower paper guide section. The "flag" should be protruding
slightly to be activated when the paper passes. However if it is stuck
down (hence giving you false paper jam message) it will be more
difficult to see! Use a decent torch to help see.
Hope this will help you.
Not finding what you are looking for?