20 Most Recent Samsung SCX-4216F All-In-One Laser Printer - Page 5 Questions & Answers

http://www.siliconguide.com/drivers/device/1403/

Go here for the driver to download.

Laser Scanner Unit or LSU is what writes to the surface of the drum. The glass above the cartridge in the machine may be dirty. The mirror motor in the LSU could be bad or needs to be cleaned to spin better. The Laser diode may be faulty.

This is not a user-serviceable issue. You will need to contact Samsung for service. You can do it online via Samsung website or contact the vendor to see who will they appoint to service the printer to, especially if it is still under warranty.

that's how normally works. Don't worry

you have to install something like this:
http://downloadcenter.samsung.com/content/DR/200411/20041122151951421_SCX-4x16_Scan_English.exe
and this :
http://downloadcenter.samsung.com/content/SW/201003/20100311105050796/Smarthru3.exe
good luck
pifonski

replace or refill toner.

Find your driver here:

http://www.samsung.com/uk/support/detail/supportPrdDetail.do?menu=SP01&prd_mdl_cd=SCX-4216F%2fXEN&srchword=SCX-4216F

Remember to select your operating system

Hope this will help you.

Dear friend ,Your printer need to service fuser unite,some times thermistor is covered dry ink.or you buy a new one toner cartridge.I hope fix your problem.

http://www.samsung.com/au/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=&prd_mdl_cd=&prd_mdl_name=SCX-4216F

Laser Scanner Unit or LSU is what writes to the surface of the drum. The glass above the cartridge in the machine may be dirty. The mirror motor in the LSU could be bad or needs to be cleaned to spin better. The Laser diode could be faulty.

This is not a user-serviceable error. You will need to contact Samsung for service. You can do it online via Samsung website or contact the vendor to see who will they appoint to service the printer to, especially if it is still under warranty.

you have to replace heater roller unit .problem is your thermistor wire is expired. replace it.

What is line error problem in fax machine?

Open printer from Control Panel. Right click and cancel all document. Turn off the printer and turn on again. Print your file.

I free software called Cute PDF Writer installs as a virtual printer. Open your scanned document in any application and then select print from the file menu and select the Cute PDF printer.

just run the smart thru cd it will get configured automatically

sorry but your scanner matrix is burned out, must be replaced

Disassemble fuser and inspect thermistor, thermostat and heat lamp. Replace broken part.

Please try to power cylce the printer (tunn OFF and turn ON and re-installing the driver)

If still persists, service may requires for this Laser Scanner Unit error.
Also, please ensure the scanning enviroment is dust free including the motor of the printer

You may want to unplug the printer and re-plug it so that you can jolt the new toner recognition procedure. If nothing happens, check to see if your new toner has any metal contacts on it. If you bought a replacement toner it may be that whoever made the refill did not reset the toner chip, and the printer now still gets a reading from the toner as if it's been in use for X printouts.
You can also contact your toner supplier and tell them what your problem is, because it really may be an issue with the toner itself.

If this was helpful and informative, please vote with a Thumb Up. Thank you.

get a new fax machine