20 Most Recent Cnet (CWR-854) Wireless Router (cwr854) - Page 8 Questions & Answers

0helpful
3answers

Need a ppt. presentation on 10th class cbse
this is not covered in instant messaging.
pls. ask on appropriate section.
Read full answer
3/1/2023 6:17:31 AM • Computers &... • Answered on Mar 01, 2023
0helpful
1answer

Photoshop cs3 not activet
You may want to remove this information because now anyone can see it and use it.
Read full answer
2/28/2023 8:34:40 AM • Computers &... • Answered on Feb 28, 2023
0helpful
3answers

Unsupported codec
Depending on the needed codec you need to install or download codecs

download this codec pack and it will automatically install codecs in your computer.. i


http://www.free-codecs.com/download/codec_pack_all_in_1.htm


Note: if it didnt solve your problem just google the specific codec you need


akuma_ryu21 rate this please!!
Read full answer
2/28/2023 3:33:31 AM • Computers &... • Answered on Feb 28, 2023
0helpful
2answers

My telkom landline wireless phone .. suddenly can not make a call .. what can be wrong and how do I fix it ?
There are several possible reasons why your Telkom landline wireless phone is not making calls. Some possible causes include:
  • The phone's batteries may be low or dead, so the phone is not able to power on.
  • The phone may be out of range of the base station or the base station may be turned off or unplugged.
  • The phone may be malfunctioning and in need of repair or replacement.
To troubleshoot and fix the problem, you can try the following:
  • Replace the batteries in the phone to ensure that it has enough power to turn on and make calls.
  • Make sure the phone is within range of the base station and that the base station is turned on and properly plugged in.
  • Check to see if there is a dial tone when you pick up the phone, if not, the issue may be with the line or the provider's network.
Read full answer
2/27/2023 11:33:55 PM • Computers &... • Answered on Feb 27, 2023
0helpful
2answers

Transferring motherboard from Gateway SX2801-07E to another case. How do I connect the motherboard front panel headers?
  1. Identify the headers: Locate the front panel headers on the new case and on the motherboard. Make sure that you have identified the correct headers and that they are compatible with each other.
  2. Check the pinout: Refer to the manual for the new case to determine the pinout for the front panel headers. Make sure that it matches the pinout listed for the motherboard, as mentioned above.
  3. Connect the wires: Use the pinout information to connect the wires from the new case to the appropriate pins on the motherboard. Make sure that each wire is securely connected and that there are no loose wires that could cause a short circuit.
  4. Connect the HDD LED: The HDD LED can be connected to pins 13 and 14 of the front header (LEDH1).
  5. Connect the power LED: The power LED can be connected to pins 3 and 4 of the front header (LEDH1).
  6. Connect the reset switch: The reset switch can be connected to pins 7 and 8 of the front header (LEDH1).
  7. Connect the power switch: The power switch can be connected to pins 10 and 11 of the front header (LEDH1).
Make sure that you connect the wires correctly and securely, as an incorrect connection can cause damage to the motherboard or the front panel components.
Read full answer
2/27/2023 11:19:14 PM • Computers &... • Answered on Feb 27, 2023
0helpful
3answers

How do I check bulk Email ID is valid or not?
I utilize an email validation tool: Email Validator And the registration is free and also the first 100 emails. It has a very good API and also 98% accuracy. It is easy to use and you can validate an entire list with their bulk email validator. Also, their API is really efficient They have also a new feature that gives a score to your catch-all emails. It can predict the probability to bounce.
Read full answer
2/27/2023 7:32:14 PM • Computers &... • Answered on Feb 27, 2023
0helpful
6answers

How is engineering education and faculties at KPR Institute of Engineering and Technology?
Most of the faculties who join this institution are themselves from yet another tier-3 college. Some of them join after completing their post graduation here. majority of them had never qualified UGC-NET or GATE. Sometimes they teach wrong concepts in class.
Read full answer
2/27/2023 9:02:46 AM • Computers &... • Answered on Feb 27, 2023
0helpful
1answer

Need web cam driver for windose 10
To find and download a webcam driver for Windows 10, you can follow these steps:
  1. Open the Device Manager: Press the Windows key + X on your keyboard and select "Device Manager" from the menu.
  2. Find your webcam: Look for your webcam under the "Imaging devices" or "Cameras" category.
  3. Update driver: Right-click on the webcam and select "Update driver". Windows will search for the latest driver software for your webcam.
  4. Install driver: If Windows finds a driver update, it will automatically download and install it. Follow the on-screen instructions to complete the installation.
If Windows is unable to find a driver update or the update does not resolve the issue, you can try the following:
  1. Visit the webcam manufacturer's website: Go to the website of your webcam's manufacturer and search for the latest driver software for your model.
  2. Download and install the driver: Once you have found the driver software, download and install it following the manufacturer's instructions.
  3. Restart your computer: After installing the driver software, restart your computer to ensure that the changes take effect.
If you are unable to find the appropriate driver for your webcam, you can try using a third-party driver update software. However, it is important to use a reputable program to avoid downloading potentially harmful or outdated drivers.
Read full answer
2/27/2023 5:01:25 AM • Computers &... • Answered on Feb 27, 2023
0helpful
9answers

Can you recommend any search engine where I can get adult contents only?
Who needs classic tube sites in the 21st century? It's 2018, why do all tube sites look the same? Nudevista answers that question by bringing you a new kind of tube site. Instead of just having the standard formula for a tube site, semi broken looking, very basic, N u d e Vista looks like a fresh new p o r n search site, complete with a large search bar smack dab in the middle of the page. Bright, fresh colors make the page really pop. Sure, they still have the standard thumbnails, but each links to a video and not to a general category. You can still search like a normal site, too. You just don't have to do quite so much clicking to get to the place you want. And they show you exactly how much content they have on the front page: 21,503,489 tube videos, 1,259,851 picture galleries and 35,895 adult models, and counting. What are you waiting for? Get on to N u d e Vista today!
Read full answer
2/27/2023 2:09:04 AM • Computers &... • Answered on Feb 27, 2023
0helpful
1answer

I have an mpi monitor heater flashing e-17 code..... Any ideas?
You probably have the GF1800 or GF3800 model. The E-17 code means: Flame Failure Possible Causes: There are obstacles at circulation air inlet or outlet. Fan cage is clogged with dust. Gas pressure dropped when other gas appliances are turned on.
Read full answer
2/26/2023 8:23:34 PM • Computers &... • Answered on Feb 26, 2023
0helpful
1answer

Ups 9390 eaton schematic diagram
I have schematic diagram of ups u. Can contact me on my WhatsApp number +919871039174
Read full answer
2/26/2023 7:55:12 PM • Computers &... • Answered on Feb 26, 2023
0helpful
2answers

E2 error.message on Luwior LWIH001 outdoor heater
The E2 error code and six beeps indicate that the heater has sensed the burner's flame has gone out or that the sensor has extinguished the flame. To resolve the issue, try turning the heater off, checking all wires, including the thermocouple, for tight connections, and then turning the unit back on. If the error persists, you may need to replace the thermocouple. Contact a qualified service technician if you are uncomfortable working on the heater.
Read full answer
2/26/2023 7:02:11 PM • Computers &... • Answered on Feb 26, 2023
0helpful
1answer

When i will receive my profit
fixya is not western union --contact them
Read full answer
2/26/2023 12:42:07 PM • Computers &... • Answered on Feb 26, 2023
0helpful
1answer

Need to delete stuff how
Are you using a Windows PC or MAC?
Read full answer
2/26/2023 6:52:05 AM • Computers &... • Answered on Feb 26, 2023
0helpful
4answers

A few Activation keys for microsoft Office 2013
Activate office 2013 click here: http://www.cdekey.com/, you can find the keys you want in a low price that you have never imagined.
Read full answer
2/26/2023 6:42:34 AM • Computers &... • Answered on Feb 26, 2023
0helpful
1answer

Conlog key pad not pressing has sound with kwh only on d screen
If the Conlog keypad is not pressing the buttons properly, it may be due to a malfunctioning keypad or a loose connection. You can try the following steps to troubleshoot the issue:
  1. Check the connection: Make sure the keypad is properly connected to the meter. Check for any loose connections or damaged wires.
  2. Clean the keypad: If the buttons are not responding properly, it may be due to dirt or debris. Clean the keypad with a soft, dry cloth.
  3. Restart the meter: Turn off the meter, unplug it from the power source, and wait for a few minutes. Plug the meter back in and turn it on again.
  4. Contact the manufacturer: If the above steps do not work, it may be a hardware issue. Contact the manufacturer or a qualified technician for assistance.
Regarding the kwh reading on the screen, it could be that the meter is only displaying the kwh reading, and not the other information. If you want to view other readings, you may need to press a button or navigate through the menu options on the keypad. If the keypad is not working properly, this may be difficult.
Read full answer
2/25/2023 7:54:59 PM • Computers &... • Answered on Feb 25, 2023
0helpful
6answers

Magic Jack- Other person hears beeping every few seconds
You can use Magic Jack customer care at http://www.magicjack.com/2/customercare.asp

I talked to 3 operators. The long and the short of it is that they had me:
1. remove a Majic Jack related folder from an applications folder
2. insert MJ1 and MJ2 in the Windows Firewall exceptions
3. format the Majic Jack software "drive"....and then install an upgrade.

Based on this, I think the problem crops up in the Majic Jack software. So far, it has fixed my problem, though I've not made a long call yet.

I found the Majic Jack operators very helpful. Be sure to have them step you through this.

Good Luck!

Amy
Read full answer
2/25/2023 7:54:50 PM • Computers &... • Answered on Feb 25, 2023
0helpful
11answers

Sandleford electronic safe es20
have just had the same problems if you had the key there is a red button inside the door to reset the code but obviously no key no red button I have the sandleford number to call 03 97750699 or try the factory pre set 159 A or B see how you go
Read full answer
2/25/2023 11:42:40 AM • Computers &... • Answered on Feb 25, 2023
0helpful
2answers

How many systems can connect to 5 kva ups
The number of systems that can connect to a 5 kVA UPS (uninterruptible power supply) depends on several factors, including the power consumption of each system and the overall power capacity of the UPS. To determine the number of systems that can connect to a 5 kVA UPS, you need to first calculate the power consumption of each system in watts. Then, divide the total capacity of the UPS (in watts) by the power consumption of each system. For example, if each system has a power consumption of 500 watts, and the 5 kVA UPS has a power capacity of 5000 VA (or 5000 watts), then you can connect up to 10 systems to the UPS. However, keep in mind that this is a rough estimate and does not take into account any additional power requirements for peripherals, such as displays, hard drives, and other components. It is always recommended to consult the manufacturer's specifications for more accurate information.
Read full answer
2/25/2023 9:57:50 AM • Computers &... • Answered on Feb 25, 2023
0helpful
1answer

How to fix boot loop on my mecer ?
There are several potential solutions to fix a boot loop issue on a Mecer computer, including:
  1. Restarting the computer: Try restarting the computer and see if it boots up properly.
  2. Removing external devices: Disconnect all external devices from the computer, including USB drives, printers, and other peripherals. Sometimes, a faulty external device can cause boot loop issues.
  3. Booting in Safe Mode: Try booting the computer in Safe Mode, which loads a minimal set of drivers and software. This can help identify any software conflicts that might be causing the boot loop.
  4. System Restore: Use the System Restore feature to restore the computer to a previous point in time when it was working properly.
  5. Resetting the BIOS: Reset the computer's BIOS to its default settings, which can help resolve any configuration issues that might be causing the boot loop.
If none of these solutions work, you may need to seek the help of a professional technician or the manufacturer's support team.
Read full answer
2/25/2023 9:51:56 AM • Computers &... • Answered on Feb 25, 2023
Not finding what you are looking for?
Cnet (CWR-854) Wireless Router (cwr854) Logo

Popular Tags

22 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Cnet CWR-854 Router
Cnet CWR-854 Router

63 Questions

Cnet CWA-854 (CWA854) 802.11b/g Wireless Access Point
Cnet CWA-854 (CWA854) 802.11b/g Wireless Access Point

16 Questions

Cnet Wireless-G CAR-854 Router (CAR854)
Cnet Wireless-G CAR-854 Router (CAR854)

11 Questions

Cnet CWR-905 Wireless-N Router
Cnet CWR-905 Wireless-N Router

9 Questions

Cnet CSH-800 8-Port Ethernet Switch
Cnet CSH-800 8-Port Ethernet Switch

8 Questions

Check Out the Mobile Browsers Report
Check Out the Mobile Browsers Report

View all Fixya Reports

Top Cnet Computers & Internet Experts

Mike M
Mike M

Level 3 Expert

3349 Answers

NOEL
NOEL

Level 3 Expert

8604 Answers

matt
matt

Level 3 Expert

1666 Answers

Are you a Cnet Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cnet Computers & Internet

  • Cnet Computers & Internet

Most Popular Question

se me extravio el cd de instalacion y

  • Computers & Internet
Loading...