20 Most Recent Samsung SCX 4623F - Multifunction fax / copier / prin - SCX-4623F - Page 2 Questions & Answers


To reset Samsung printer manually, firstly press the Power button until the LED light turns off. Before proceeding to next step, confirm that your Samsung printer is off. Now, you have to remove the power cable from the back of Samsung printer and then leave your printer unplugged for 10 minutes.
https://www.printerstechnicalsupport.com/how-to-reset-samsung-printer-firmware

Samsung Office... | Answered on Apr 25, 2020


https://www.youtube.com/watch?v=AN973Ko0kX8

Samsung Office... | Answered on Apr 17, 2020


To print a duplex page, follow these steps:
  1. Go to Device and Printers. ...
  2. Right click on the printer, then select Printer Preferences. ...
  3. Below Double-Sided Printing select Long Edge or Short Edge depending on preference. ...
  4. Click Apply and OK to save the changes.
https://support.hp.com/in-en/document/c05589026

Samsung Office... | Answered on Mar 28, 2020


https://www.youtube.com/watch?v=K93j4hdTpZQ

This error is caused by a counter inside your printer not being correctly reset when the new belt is installed. To fix this problem follow the steps below: Press MENU then #1934. Use the arrow keys to navigate to the Tech menu (this is different to the User Mode)

Samsung Office... | Answered on Mar 25, 2020


I searched the internet using https://www.google.com to see if I could locate support information for this printer.

The following link mentions software but didn't show how to troubleshoot the printer for that problem.
https://support.hp.com/us-en/drivers/selfservice/samsung-scx-3201-laser-multifunction-printer-series/19135195

Samsung Office... | Answered on Mar 07, 2020


https://printcopy.info/index.php?mod=erc&brand=Samsung&model=ML4510ND&code=C3-1312

Link to Service Manual above for the ML4510ND model.

Quoting from link above:

Code: C3-1312
  • Display:Imaging Unit Failure: #C3-1312. Install imaging unit again.
  • Description:Toner sensor is defective. The machine can't detect the sensor signal in the imaging unit normally.
  • Remedy:1) Install the genuine samsung imaging unit. 2) If the imaging unit is already installed, check the following. • Reinstall the toner cartridge and imaging unit. • Check if the CRUM connector is normal. • Turn the machine off then on.
-----------------------------------------------------------------------------------

Another link to check, page 4-40:

http://www.electis.co.il/files/disfiles/ErrorCodes/A3%202200/K2200_Error_Codes.pdf

Samsung Office... | Answered on Mar 06, 2020


Unplug!
Uninstall all drivers in USB and CD-ROM!
Restart system..
Start fresh installation.

Samsung Office... | Answered on Mar 04, 2020


https://eu.community.samsung.com/t5/Cameras-IT-Everything-Else/Samsung-SCX-3200-Printer-Double-Printing-Problem-Software/td-p/260539

Samsung Office... | Answered on Feb 12, 2020


this is a list of a lot of manual for your printer in the link below

http://www.samsung.com/us/support/downloads/SCX-4623FW

Samsung Office... | Answered on Dec 04, 2019


I am only guessing at this point but there should be a tap that sticks out from the back of the rear door ( much like the way a microwave door has a tab on it that lets you know that the door is fully closed ) so check the back of your printer to make sure that the tab is still in place and if it is, check to see if it is doing what it was meant to do, also the tab system might have been replaced with a small magnet or a metal plate that makes contact with each other and when this is done the printer knows the door is closed, so if all looks good then it could be the electronic part that the tab or magnet comes into contact with and this is faulty or misaligned, remember to look closely at the back of the door to see if a tab has been broken off or is missing. So also study the printer body and look for a way in which the printer knows that the door might be open eg. some sort of electrical switch that tell the printer that the door is not shut and then ask yourself why the switch is not been activated.You might have to takes steps like gluing on a tab or wedging something in between the switch to trick the printer into thinking that the door is shut but a little bit of detective work is required on your behalf.

Samsung Office... | Answered on Nov 20, 2019


You should try feeding one sheet at a time and make sure u are using paper that is compatible

Samsung Office... | Answered on Nov 14, 2019


Changing the Display Language and Country
Setting Language
To change the language that displays on the control panel,
follow these steps:
1 Press Menu until "Machine Setup" appears on the top line
of the display.
2 Press the scroll button ( or ) until "Language" appears
on the bottom line of the display.
3 Press Enter. The current setting appears on the bottom
line of the display.
4 Press the scroll button ( or ) until the language you
want appears on the display.
5 Press Enter to save the selection.
6 To return to Standby mode, press Stop/Clear.
Setting Country
1 Press Menu until "Machine Setup" appears on the top line
of the display.
2 Press the scroll button ( or ) until "Select Country"
appears on the bottom line of the display.
3 Press Enter. The current setting appears on the bottom
line of the display.
4 Press the scroll button ( or ) until your country appears
on the display.
5 Press Enter to save the selection.
6 To return to Standby mode, press Stop/Clear.
NOTE: Changing the country clears the memory.
Link to manual
http://h10032.www1.hp.com/ctg/Manual/c05786751

Samsung Office... | Answered on Nov 13, 2019

Not finding what you are looking for?
Samsung SCX 4623F - Multifunction  fax / copier / prin - SCX-4623F Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6198 Answers

The Knight
The Knight

Level 3 Expert

76455 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Samsung Office Equipment & Supplies

  • Samsung Office Equipment & Supplies

Most Popular Question

samsung printer scx 4623 message keeps

  • Office Equipment & Supplies
Loading...