20 Most Recent Canon PIXMA MG5220 Wireless Photo All-in-One Inkjet Printer - Page 2 Questions & Answers

0helpful
1answer

Focus repair on a Canon D10 Camera.

9 years old model, probably not worth repair. You can get used one on ebay for little money
7/18/2020 5:30:17 PM • Canon Cameras • Answered on Jul 18, 2020
0helpful
1answer

Canon ixus 330 zoom lens 3x 5.4-16.2mm1:2.7-4.7 download drivers

Feel free - we won't prevent you.
2/13/2020 8:24:54 AM • Canon Cameras • Answered on Feb 13, 2020
0helpful
1answer

I have a Canon G11. When I push the zoom lever to zoom the lennse, it immediately goes back to the initial position when I release it instead of staying at the selected position. Any ideas.

there may be dust inside the lens (motor ,gears and sensor) pleas open and use an air blower to oust it.
1/8/2020 7:05:57 PM • Canon Cameras • Answered on Jan 08, 2020
0helpful
1answer

How to use and do photography on canon power shoot sx 60sh?

Same as any camera - uncover lens, point camera at subject, press shutter button. Simples.
12/31/2019 9:58:45 PM • Canon Cameras • Answered on Dec 31, 2019
0helpful
1answer

Is it possible to replace the battery compartment on my 1980s canon t50? I have a non-working t50 for parts-just not sure how to conduct camera surgery. Thanks!

Highly unlikely. Google the service manual for the camera, see if that offers any help.
12/2/2019 8:07:20 PM • Canon Cameras • Answered on Dec 02, 2019
0helpful
1answer

Downloading an updated Firmware for Canon 5D Mark II

The current firmware is version 2.1.2. Use this link to get to the Canon download page. Scroll all the way down to “Drivers and Downloads”. Select “Firmware” and then the appropriate version for Windows or Mac.

https://www.usa.canon.com/internet/portal/us/home/support/details/cameras/support-dslr/eos-5d-mark-ii?subtab=downloads-firmware
10/26/2019 1:20:08 PM • Canon Cameras • Answered on Oct 26, 2019
0helpful
1answer

My Canon digital rebel eos 300d will not download to my Mac computer and the lcd panel says Busy. Can you help?

The camera is trying to process information to or from the memory card. If the status does not change after a few minutes, you may have a damaged memory card. Turn the camera off. Remove the memory card and inspect it. Reinsert the memory card. Can you view photos on the LCD by pressing the arrow button? If so reconnect to your computer. If not, you most likely have a damaged memory card. Try inserting the memory card into a card reader connected directly to your computer. This may be able to still read the card when your camera cannot.
10/3/2019 12:27:36 PM • Canon Cameras • Answered on Oct 03, 2019
0helpful
1answer
0helpful
1answer

What is the resolution for a 4 year old Canon SX620HS. Can it be changed?

Have you looked in the manual ?
9/27/2019 11:30:21 AM • Canon Cameras • Answered on Sep 27, 2019
0helpful
1answer

Canon Autofocus problem

It sound like a fault with the auto connection probably a broken or cracked ribbon cable. May well need a replacement
9/24/2019 8:04:06 PM • Canon Cameras • Answered on Sep 24, 2019
0helpful
1answer

Autofocus does not work after cleaning canon 55-250mm lens

If it focuses OK manually but doesn't on auto you may have a crack or broken ribbon cable in the lens.
9/24/2019 7:56:34 PM • Canon Cameras • Answered on Sep 24, 2019
0helpful
1answer

Canon Legria FS306 none of my SD cards work, even with the switch unlocked???

Check that the sandisk ultra microsdhd 1 is compatible with the Legria FS306
9/24/2019 7:54:42 PM • Canon Cameras • Answered on Sep 24, 2019
0helpful
1answer

I have attached the tamron sp 70-200mm f/2.8 di vc USD to a canon 6d mark ii and found that live view and video does not work

Does live view work with other lenses? if so you may just have a dirty or faulty connection re the Tamron 70-200.
9/24/2019 7:47:21 PM • Canon Cameras • Answered on Sep 24, 2019
0helpful
1answer

I just got a Canon 6d Mark II but My Neewer Vision5TTL and vc 818tx will not work at HSS. The Camera even though will fire the flash at All Speeds I get Shutter Drop above 1/160

You need to check out the correct settings as the flash sync speed for you 6D ii is 1/180th which you should be able to use at 1/200th so only being able to get less than 1/160th would indicate incorrect setting in the external flash mode or a slight fault.
9/24/2019 7:44:42 PM • Canon Cameras • Answered on Sep 24, 2019
0helpful
1answer

Canon advance err E000066-0001

Thanks for letting us know
9/19/2019 9:01:03 PM • Canon Cameras • Answered on Sep 19, 2019
0helpful
1answer

My daughter has a canon Eos 6D that won’t power up. We have been trying a few things we found on line to fix problem but they didn’t work. Do you have a list of steps we can try?

Check protection switch on memory card door, if switch defective, camera wont turn on
9/10/2019 10:53:57 PM • Canon Cameras • Answered on Sep 10, 2019
0helpful
1answer

The color quality of my photos taken with my Canon Power Shot A3300 IS camera is dull. How can I improve the color?

Make sure that the flash on the unit is working and that you aren't accidentally covering the flash on the camera with your fingers. Make sure there is good lighting for your pictures.
8/27/2019 7:04:06 AM • Canon Cameras • Answered on Aug 27, 2019
Not finding what you are looking for?
Canon PIXMA MG5220 Wireless Photo All-in-One Inkjet Printer Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2395 Answers

Ekse

Level 3 Expert

13435 Answers

Steven Wander
Steven Wander

Level 3 Expert

596 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Cameras

  • Canon Cameras

Most Popular Question

canon pixma printer new magenta ink

  • Cameras
Loading...