LG LMV1813ST Microwave Oven - Answered Questions & Fixed issues


F4 means sensor open, You have to check the Humidity sensor.
If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

LG LMV1813ST... | Answered on Feb 07, 2017 | 1,010 views


This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

The lights can can be inoperable or stuck on or stuck in "night light" mode. Sometimes this will similarly affect the fan operation or inside light, too.
The problem is on the controller assembly, which I regularly repair. Details are here.

I also have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

LG LMV1813ST... | Answered on May 24, 2016 | 755 views


The circuit breakers may both be functioning properly. What might be happening is that both circuits have other current drawing appliances on them. The circuit breakers react to the sum of all of the currents drawn by all of the devices on that circuit. So, if you have a 15 amp microwave and an 8 amp refrigerator on the same circuit, you would overload a 20 amp circuit by 3 amps.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0

LG LMV1813ST... | Answered on May 09, 2016 | 318 views


If the control panel lights up intermittently, then you either have a loose connection somewhere near the panel, or a failing component on the circuit board itself.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0

LG LMV1813ST... | Answered on May 09, 2016 | 472 views


The fuse can be replaced, but the underlying issue should still be investigated and resolved. Otherwise the new fuse will blow also.
If the microwave is not working the thermal fuse may have blown.
When a microwave stops working the problem is usually the line fuse or within the high voltage circuit; either the high voltage capacitor, diode, transformer or magnetron.

LG LMV1813ST... | Answered on Sep 28, 2015 | 1,043 views


YOU DON'T PREHEAT THAT TYPE OF MACHINE USE BRAIN ONCE IN A WHILE

LG Microwave... | Answered on Jun 05, 2020 | 130 views


THE HIGH VOLTAGE FUSE IS IN A PLASTIC EXTRUSION NEXT TO THE CAPACITOR AND DIODE.
YOU CAN USE 3 OR 4 STRANDS OF THIN WIRE FROM MULTI STRAND 15A MAINS CABLE. SOLDER IT OVER THE BLOWN FUSE. I HAVE DONE THIS 100'S OF TIMES.

LG Microwave... | Answered on May 18, 2020 | 154 views


It's most likely your door switch. I have the same problem and was told that. I'm not 100% certain, but will take a look at mine and let you know.

LG Microwave... | Answered on Oct 22, 2019 | 913 views


What is it that you are losing ? You can set the power level by using the marked touchpads on the touchpanel, much like setting the volume on a TV. If you do not change the power setting and it is taking a long time to heat things or intermittently fails to, that is usually a sign that the Magnetron has reached its use by date and needs to be replaced. Not always an economical proposition unfortunately as spare parts are often exorbitantly priced.
Before removing the cover of the oven in attempt to carry out any maintenance such as replacing the Oven cavity lamp, make sure the oven is disconnected from the power point ! The voltages in a microwave oven ARE LETHAL !

LG Microwave... | Answered on Oct 18, 2019 | 127 views


turntable drive may be fouling on cabinet.
Take out the table and see if it is still slow. To centre the drive- take the panel off the bottom, you may have to cut the metal the first time

LG Microwave... | Answered on Aug 05, 2019 | 153 views


take cover off there are plastic catches who could have wear and tare

LG Microwave... | Answered on Jul 16, 2019 | 188 views


First, check your users manual for proper programming functions. Then either return the oven to the dealer for a replacement, if their policy allows it or contact a factory authorized dealer to service it under the warranty policy.

LG Microwave... | Answered on Jul 01, 2019 | 140 views


I would contact an LG service department and order one.

LG Microwave... | Answered on Jun 07, 2019 | 132 views


The outer cover will have to be removed to gain access.

LG Microwave... | Answered on May 22, 2019 | 212 views


try this manual i found
https://www.manualslib.com/manual/765799/Lg-Lmv1683st.html?page=34

LG Microwave... | Answered on Apr 22, 2019 | 196 views

Not finding what you are looking for?
LG LMV1813ST Microwave Oven Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top LG Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Cindy Wells

Level 3 Expert

6120 Answers

Nick Olsen

Level 2 Expert

196 Answers

Are you a LG Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...