Top 20 LG LMV1813ST Microwave Oven - Page 7 Questions & Answers


Jammed due to dirt.
Power supply transformer deffective.
One button is stuck shortcircuiting the board.

LG Microwave... | 569 views | 0 helpful votes


short in the control board.

LG Microwave... | 480 views | 0 helpful votes


More than likely the klystron tube is defective, that draws a lot of current. Best path here is a new MW

LG Microwave... | 595 views | 0 helpful votes


Your manual can be downloaded free here:
LG Support Search Results LG AU

Feel free to contact me through my site if you need more help:

http://www.microwavecontrol.com/

LG Microwave... | 272 views | 0 helpful votes


You might try unplugging it for 2 or 3 minutes, then plugging it back in.

Feel free to contact me through my site if you need more help:

http://www.microwavecontrol.com/

LG Microwave... | 262 views | 0 helpful votes


You might try unplugging it for 2 or 3 minutes, then plugging it back in.

Feel free to contact me through my site if you need more help:

http://www.microwavecontrol.com/

LG Microwave... | 251 views | 0 helpful votes


Replace the control board with a new one

LG Microwave... | 266 views | 0 helpful votes


The touch pad switch is faulty. You have to replace it
If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

LG Microwave... | 326 views | 0 helpful votes


It can be the touch pad.
If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

LG Microwave... | 257 views | 0 helpful votes


You need to be carefull. You need a tester to use to check aroud the door after installing door. You should have a qualified tech. check it.

LG Microwave... | 305 views | 0 helpful votes


I being an experienced technician all I do is get micro buttons such as used in television set .I carefully apply minimal hot air from a hair dyer to the touch panel in a clean environment then strip the adhesive touch panel to check the wire ring that tress back to the pcb that is just beneath the touch panel. yo have to locate common and the wire responsible for touch, then drill a small hole where the micro button will sit solder to wires on the button then carefully solder them on the board.now make sure the button is on the same level with the surface before you return the adhesive touch panel make sure the button sits well then from beneath apply hot glue please don't use super glue if you don't understand I will send you pictures.

LG Microwave... | 311 views | 0 helpful votes


If you wish to get some details; check the site linked here. Pull up older posts...
http://electro-medical.blogspot.com/

LG Microwave... | 259 views | 0 helpful votes


If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

LG Microwave... | 283 views | 0 helpful votes


Apparently, although LG could be more forthcoming with the actual rating.

LG Microwave... | 266 views | 1 helpful votes


Only happens when cooking a big pot under the microwave? Hosing thermal fuse / thermostat kicks in to cool the microwave. Is the micro. Installed proper height above the range? Are you using the fan when cooking on the range?

LG Microwave... | 269 views | 0 helpful votes


Unplug it, count to 10 and plug it back in.

LG Microwave... | 356 views | 0 helpful votes

Not finding what you are looking for?
LG LMV1813ST Microwave Oven Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top LG Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Cindy Wells

Level 3 Expert

6113 Answers

Nick Olsen

Level 2 Expert

196 Answers

Are you a LG Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LG Microwave Ovens

  • LG Microwave Ovens

Most Popular Question

cause cloud humidity build up in

  • Microwave Ovens
Loading...