20 Most Recent
Creative Labs TravelSound (51MS0000AA024 ) Computer Speakers - Page 9 Questions & Answers
Frozen
flip the unit over and look for a small pinhole put a paperclip or small pin in there and press the button that should reset the unti and unfreeze it
I have a SBS 5.1, only one speaker is working.
First test the "non working side" with the speaker which is on the good side. Hook it up on that side and turn on the system. Make sure to go from left to right to left on the volume control pop-up or in the control panel, if it is Windows.
If the test above indicates that you get no sound, then the sound card is suspect.
If this is a removable card, it may be possible to put another sound card in.
Problems with Creative Inspire M5300 and vista
It is sure to be the audio driver. You did not mention the brand of your pc or sound card. You need to download the audio driver from the manufacturer's site. It should be easy to find the drivers for Vista once you go to the manufacturers site and look for your PC model.
Need drivers to install for xp
Creative Labs has always been tough about making their sound drivers available. One trick I found was to go to www.hp.com or www.dell.com and look for creative lab sound drivers there. I have not had any luck getting them from Creative Labs usually I end up purchasing a inexpensive new sound card.
PC doesn't recognize USB speakers.
1.Go to Device Manager
(Right click on My computer and select properties, then click on Hardware tab then click on Device Manger)
2. Uninstall the USB that represents your Speakers (then follow the prompts)
3. Restart your PC and it will automatically add your USB speakers.
Sound blaster live 5.1 sound driver code sb0100
Hi curt here I have a hppaviliona636n desk top runing vista and I have the on board sound disabled. as it dose not seam o work and i do not have the orignal disk wth the drivers on it . how everI put my sound blaster live 5.1 sb0100 pci card in and down loaded the drivers for this card and installed them tem form a file on the desk top how ever this also did not make this card fireand I wonder if maybe I am missing a jumper of the sound blaster board and cant seam to find ajunper lay out for tiswhat cn I do to check for jumpers on both the sound blasterboard and the hp mother board .? and also do the drivers have to be saved on a cd or a 1.44 flopie disk befor they will load or will the sound drivers load from the desk top location?? my email address if you need it is
[email protected] thank you Curt. tucson
The pin of my headset bend and now it works only
This is not easy to fix as the connector is usually molded plastic. If you have access to a soldering iron of low wattage (25W) and a small tip you might be able to replace the complete cord all the way to the headphones. This type of job is not quick and wires have to be disconnected at the earpiece. Sorry.
Cant set time or alarm for grundig s350
Hi,
TO SET THE CLOCK
First the radio must be turned off to set the clock. With the radio turned off, hold down the TIME button for three seconds, then release it. The time display will flash. While it is flashing press the HOUR and MINUTE buttons to set the correct time. After setting the correct time, immediately press the TIME button to finalize the entry. If the TIME button is not pressed, the display will automatically finalize the entry after about five seconds. While setting the time, the HOUR and MINUTE buttons can be held down to advance the time faster.
TO SET THE ALARM
With the radio powered off hold down the ALARM SET button for about three seconds or until the time digits start flashing, then release it. While they are still flashing press the HOUR and MINUTE buttons to set the turn-on time, then immediately press the ALARM SET button again. If the ALARM SET button is not pressed immediately, the turn-on time will automatically set itself to the time you selected anyway after 5 seconds.
To activate/deactivate the alarm feature - With the radio turned off, press the AL ON/OFF
button, causing the symbol of a speaker to appear in the upper right corner of the display.
When the speaker symbol is in the display, the alarm feature is activated. When it is not
in the display, it is deactivated.
Once the speaker symbol displays in the screen - the radio must then be left turned off for the alarm feature to function.
Hope this helps. Please remember to rate my answer as ratings are important to me as an expert on this site. Many Thanks.
Earphone problem
Check the audio balance on whatever device you are using your headphones with. There may be nothing wrong with the headphones. If thats not it than replacing them is the only thing you can do.
No sound coming from speakers
better search for the driver for the hardware you install for sound there are different drive as you mention that you have win XP so search for the driver accrording to the operating system you are using see for both hardware as well software issue for more problem do consult you nearest autorised service centre for help or do visit the microsoft web site for more help so untill then see you sir hope you will find the solution for your problem
I cant hear any sound from my computer.i tried to
hello..try this way to install the driver.click right My Computer,Properties,Hardware and Device Manager click.then click the yellow Question mark near at the Sound,video and games controller then install and update the Driver..Thanks and Good Luck...^_^
My mp3 zen neon2 doesn't switch on. it has frozen.
Your Zen needs a refresher course in Zen.
You will find your drivers on the creative site
As part of our ongoing efforts to supportyou, Creative is happy to introduce the MP3 Player Recovery Tool, aprogram that resolves the majority of player problems quickly.
One click is all it takes to update yourplayer to the latest available firmware, and to give your player aclean bill of health.
BEFORE YOU START
- Check that the MP3 Player Recovery Tool supports your player.
- Ensure that you are using Windows XP® Service Pack 232-bit,Windows XP Professional x64 Edition or Windows Vista™ (32-bit or64-bitversion).
- Back up the contents of your player, if possible,as recoveringyour player may require it to be re-formatted, erasing allcontent.
- Make sure your player battery is at least 50% charged.
- Detailed usage instructions are available in our Knowledge Base.
Click here if you require further information/assistance.
Sound card problem
Hi Miong u,
Untill you install the sound drivers, your computer won`t recognise your sound card.
Go HERE (http://downloadfinder.intel.com/scripts-df-external/filter_results.aspx?strTypes=all&ProductID=828&OSFullName=Windows*+2000&lang=eng&strOSs=19&submit=Go%21) and download, and install your audio drivers.
You can download the driver from intel website depending on the O.S
Might I also suggest you download your chipset drivers as well.
Thanks for using Fixya.
Do rate the solution as "Fixya" if 100% satisfied.
IN MY SYSTEM UNFORTUNATELY UNINSTALLED THE DRIVER
You can try this:
I am assuming you have a PC based sound system.
1. Remove your Creative Labs Home Theater from your PC. You should remove all hardware.
2. If you have Windows, go to "Control Panel"
3. Select "Add or Remove Programs"
4. Delete all Software releted to your Creative Labs System
5. Go to
http://www.creative.com/language.asp?sDestUrl=/support/downloads
6. Download the appropriate driver for your system
7. Reinstall the system with the new driver
You could try your CD ROM after completely deleting the software from your PC, but I think I'd just try the downloaded version. The important thing is to completely remove all hardware and software before reinstalling.
Not finding what you are looking for?