20 Most Recent
D-Link AirPlus Xtreme Super-G DI-624 Wireless Router (di-624/b) - Page 11 Questions & Answers
Telkom email settings
No Outlook email password is different, without knowing the incoming and outgoing address is not possible to configure outlook, which email service are you using check with them for incoming and outgoing mail server address
D Link 524 password
If you're looking for the default username and password information for your D-Link DI-524, or perhaps how to reset it incase you've forgotten it, this website below outlines the lot of it.
Keep in mind, D-Link made a lot of revisions of this router, and one set of steps might work for one revision, and not on the other. Pay close attention to your revision. The article attached will outline where to find it (it's usually on a barcoded sticker on the underbelly of the unit).
http://pcsupport.about.com/od/d-link-default-passwords/a/di-524-default-password.htm
Hope this helps!
Print size a3
Print size A3 is decided by printer (tray) + printer driver.
A print server does not decide print size.
Keyin ssid
Depends on what you're looking at - if you're on a router, then the SSID is the network name that the router broadcasts (it shows up on your laptop/PC in the list of wireless networks) and you can set it up as anything you like. If you're on a PC/Laptop/Games Console then the SSID is the name of teh network you are trying to connect to. You shouldn't need to enter it as it should show up on the list of "available wireless networks"
Wireless password
The wireless password for a router is established by the administrator of the router. This is whom you should ask for the password. Hacking into the router wont help you find it because the password is not displayed...it is a series of dots. You CAN, if you access the router setup, CHANGE the wireless password to something you can use - but if you are hoping to piggyback or hack onto someones service using their wireless password, you're out of luck.
Dir 505 manual
Try this link to the PDF:
http://www.dlink.com/-/media/Consumer_Products/DIR/DIR%20505/Manual/DIR_505_Manual_US.pdf
Cant open the admin console on mt dwl-3200ap
Try this. Push and hold in the rest button while at the same time pull out the powers supply line from the unit. Release the reset and wait 30 seconds. Push in and hold in the reset button, apply power to the unit and keep holding the rest button in for 30 seconds, then let the reset go. It should reset everything back to factory settings and hopefully let you in with the original admin pw when you bought it.
How to change nat to open
just type 192.168.1.1 and u will prompt for login id and passowrd in ur browser for yout router your id is admin and login pass is also admin login and u will get nat settings there u can easily change
How do i retrieve my d-link password?
If you forget your Web configuration password, you're stuck: you have no way to change any settings on your router. You need to reset the router to the default settings.
Hold down the tiny reset button on the back of your router for about five seconds. Your router lights will blink to confirm the factory reset. You can now use the router's default password to log into its Web configuration screen (look in your router manual if you can't remember what this is). Once you're in, be sure to change this password to something unique.
What to do if you forget your wifi password
Many routers and gateways can be logged on via a browser window on the PC with the internet address http:/192.168.0.1. It will ask for a username and password, which is usually a default value of "admin" and "password" unless you have changed it.
This is not your wi-fi network passkey, but for the admin account on your router. You should then be able to see your network passkey in the router settings.
Not finding what you are looking for?