GE 45231 Home Monitoring Camera - Answered Questions & Fixed issues


red & black is your power + & ground -. Yellow and black is your video and ground. you probably don't have audio if there is not another wire. If you have a shield wire around the others sometimes that is used for ground and in that case red and shield wire would usually be the power.

GE 45231 Home... | Answered on Dec 04, 2017 | 139 views


Call the cops. This may be an indication that someone is planning to rob your home.

GE 45231 Home... | Answered on May 19, 2016 | 595 views


All wireless security motions have a 3 min delay built into them. This means that whether the alarm is set or not when the motion detector picks up motion it shuts down for 3 min and will not pick up motion. This is done to conserve battery power. So I always advise customers to arm the system and stay away from the motion for 3 min total. example: 60 sec to arm system + 2min wait time. then try to trigger motion. If this does not help and assuming batteries are good, you'll need to replace motion. Good luck. This may help https://al.ly/vR54zP

GE Home Security | Answered on Dec 15, 2019 | 125 views


I would start by power cycling your system. Remove the battery & power. After waiting 10 minutes or so reconnect the battery and then power. Other than that you need to be a bit more specific with your issues.

GE Home Security | Answered on May 03, 2019 | 168 views


Try disarming system twice to get the fire zone to reset. If that doesn't work, try to downpower the entire system, including back up battery then re-power the system with the back up battery first.

GE Home Security | Answered on Oct 24, 2018 | 236 views


Try changing batteries in both unit andbutton - a common cause for failure.

GE Home Security | Answered on May 08, 2018 | 101 views


you need to get the installer code, then enter programming mode to delete the sensor.

GE Home Security | Answered on Mar 28, 2018 | 103 views


They pick up signals from taxis and tow trucks. One some you can change the channels. Unfortunately the problem of 'wireless'.

GE Home Security | Answered on Jan 29, 2018 | 431 views


Try updating IE to the latest version if not you can try firefox or google chrome check the manufacturers docs to see if they require a certain web browser.

GE Home Security | Answered on Aug 30, 2017 | 71 views


Call GE for parts. Sears also has repair service for GE.

GE Home Security | Answered on Jul 19, 2017 | 112 views


press the "status" button. If it is a Simon XT , press "disarm" then "status"

GE Home Security | Answered on Jun 09, 2017 | 264 views


I assume you want to monitor the camera from Android, unfortunately I'm not sure this is possible because the camera you have is not an independent camera or webcam, it is intended as a add-on for GE Color or B/W wireless systems (45234, 45235, 45236.)
https://byjasco.com/sites/default/files/product/manuals/45233-Manual-Eng.pdf
It looks like the camera transmits to the receiver.
GE 45234 User Manual

GE Home Security | Answered on Jan 31, 2017 | 1,555 views


NO it will not .

GE Home Security | Answered on Aug 06, 2016 | 64 views


Here is a very easy to follow video tutorial that may help you.
You can get a replacement battery from here
Simon XT GE Security Security Alarm Battery 6V 1 2AH

GE Home Security | Answered on Jan 06, 2015 | 505 views


Step 1. With the cap closed, set the numbered dials to the combination line. The factory preset combination is "000".
Step 2. While maintaining the combination in place, rotate the "RESET" dial indicator beneath the letters approximately 90 degrees to line-up with the combination line. If the correct combination is not set, the "RESET" dial will not rotate.
Note: Using excessive force can damage the dials.
Step 3. Set the new combination while maintaining the position of the "RESET" dial.
Step 4. While maintaining the combination in place, rotate the "RESET" dial back to the original position. The combination has been changed.

GE Home Security | Answered on Feb 23, 2013 | 4,784 views


i changed my GE DVSR admin password but forgot to note down how do i reset it to dafault/factory default

GE Home Security | Answered on Sep 16, 2011 | 2,174 views


Hi, these are usually available in a service manual, these may be obtained from the 'net, or by a direct approach to the manufacturer.
Use the exact make and model and the words service manual when doing a Goggle search. or make direct contact to he manufacturer.

GE Home Security | Answered on Aug 29, 2011 | 339 views

Not finding what you are looking for?
GE 45231 Home Monitoring Camera Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top GE Home Security Experts

Sean

Level 2 Expert

80 Answers

Cindy Wells

Level 3 Expert

6161 Answers

Are you a GE Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...