20 Most Recent Edimax BR-6104K Router (br6104k) - Page 5 Questions & Answers

Hello, my name is Glenn, I am not familiar with wireless signal boosters, but I have a great idea on how to set up networks and multiple routers in 1 network. How I picture a wireless signal booster to work is to plug in from your netgear router, into the Edimax.

Use an ethernet cable.

reset modem button in back side smal hole is there ofter reset just reboot the wifi it will work 100%

I have the same problem. I try it from 1 month. My model is BR-6428nS. How I know which my PIN is?

For most Edimax routers, the default IP address is 192.168.2.1, default username is admin and password is 1234. By default the router is a DHCP server which will assign IP address starting from 192.168.2.100 to 192.168.2.199 to DHCP clients automatically. Make sure your computer has TCP/IP Protocol setup as "Obtain IP address automatically". Open the Internet Explorer. Type in http://192.168.2.1 hit Enter. The Login window will appear. Type in the default username admin, password 1234. Click on Login. Then you can configure the router.

Reset the device to default settings, then reconfigure the device's SSID and Security Key. Try here for support, you didn't post the Edimax model number: http://us.edimax.com/ You can use this procedure to reset: http://compnetworking.about.com/b/2009/03/11/the-30-30-30-hard-reset-rule-for-routers.htm

A router is only used to connect devices together in a LAN (local area network). In order to get out to the internet you also will need a modem (cable or dsl depending on your service) You will also need to pay for service through an ISP (Internet Service Provider)

Log in to the router's administrative console through a Web browser using the current password and username. In the router's administrative console, navigate to the appropriate administration / security section where the password setting can be changed. In this example, the Administration tab at the top of the screen contains the Linksys router's password setting. Choose a suitable password based on the standard guidelines for strong password security. Enter the new password in the Password box, and re-enter the same password a second time in the space provided. Entering the password a second time ensures you did not accidentally type in the wrong password the first time.The password change is not applied on the router until you save or confirm the change. In this example, click the Save Settings button at the bottom of the page to have the new password take effect. You will see a confirmation window appear briefly to confirm the password change was made successfully. The new password takes effect immediately; rebooting the router is not required.If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

theres a temporary solution... reset router and change the date on your computer to 1 febrauary 2010 and you will be able to login. you can set all your details and even if you change your date back to current it will not affect your settings however to log back into the router you need to set back your date to feb 2010.. Hope this works.

Sure. It's a Wireless Access Point, right? If you have a Wireless Adapter in your computer, it will see a signal.