FUJIFILM XP30GPS Digital Camera - Page 9 - Answered Questions & Fixed issues

With the help of Bitwar PDF Converter.
Note: The software is now offering a free 30-day trial for new users.
Step 1: Visit the Bitwar PDF converter official website to download and install it.
Step 2: Open Bitwar PDF Converter and choose Split PDF tool from the Other PDF Tools menu.
Step 3: Add the PDF file and choose the pages that you want to delete.
Step 4: After selecting pages, click Convert and Open path to preview the new PDF file!


Cameras | Answered on Nov 02, 2020 | 17 views

Your stealth cam may not be intended for outdoor use.

Cameras | Answered on Oct 30, 2020 | 21 views

Has it been formatted ? If you have read it in your computer without setting write-protect, the computer will have written hidden files to it which the camera cannot understand.

Cameras | Answered on Oct 29, 2020 | 16 views

User manual. Normally, the spring contact goes on the negative and the positive is the flat end. It is shown in the diagram anyway.


Cameras | Answered on Oct 24, 2020 | 26 views

Not familiar with the model but I think most point and shoot cameras are similar to each other - if that is so you should find a delete option in a menu when you are viewing the picture you want to delete.
You can also delete by connecting to a computer or using a card reader with the computer and and deleting single pictures or whole files.

Cameras | Answered on Oct 24, 2020 | 14 views

The device is not meant to have the battery changed (?!).
However, I am going to drill out the holes where the screws would go and try and change them myself. It doesn't not make 'consumer' sense to me to have this unit without being able to change the battery. It has a 5 year battery life but I only need this unit once in a while so in 5 years I may only use it once or twice.

Cameras | Answered on Oct 21, 2020 | 3,187 views


make model manual


MSDC stands for Mass Storage Device Class. It is the most significant part of camera, which is required to bond camera and computer. If there is any damage/corruption in internal File System structure of the card then MSDC fails to detect the card, so MSDC read sector or MSDC write sector error in memory card arises.

Fix MSDC Sector Error in Memory Card - Yodot

Cameras | Answered on Oct 20, 2020 | 15 views

There's probably a port for a cable to attach...USB/HDMI/? Depends on the camera. Try to figure out the attachments needed on each end, and order that cord from Amazon. Or, just take your camera to Best Buy and let them help you. Normally, once you attach the cable to the camera and computer; your computer will recognize it. Then transfer the pics to a designated folder for viewing. Hope this helps.

Cameras | Answered on Oct 13, 2020 | 76 views

If it is saying "non-playable file" it usually means the format the photos are saved as isn't one the player recognises. Basically, The photos are in one language and the player doesn't understand it. If you or someone you know is good with computers the photos can be reformatted, (translated), into a form the player understands. It isn't a hard thing to do and most laptops and computers have software built in that will do it easily and quickly.

Cameras | Answered on Oct 14, 2020 | 15 views

First, eliminate some of the possible causes:
1. Is the battery low or dead? Use a fully charged battery.
2. Is there an obstruction causing the lens from3 opening or closing - such as sand or other particles.. They have to be removed.
3. Did you drop the camera? That might damage the zoom gears or put the lens out of alignment. Do not shake it. If this has happened, an expert tech might have to disassemble it and adjust. This could get expensive, depending upon where you had it done.
4. Is there an uneven gap between the lens and the lens housing? Turn it off, place it face up, look. If so, apply gentle pressure at the highest gap in order to snap it into place. You should hear a click. Power it on. If it extends and contracts power it off, then try to move the lens in a circular motion until it clicks. Power it on. Twist the largest lens ring until it clicks.

Cameras | Answered on Oct 10, 2020 | 14 views

My last pay check was $9500 working 12 hours a week online. My sisters friend has been averaging 15k for months now and she works about 20 hours a week. I can't believe how easy it was once I tried it out. This is what I do.Click For Full Detail.

Cameras | Answered on Sep 25, 2020 | 14 views

Take the card out and check if the lock switch is in the locked position. You need to move it to the unlocked position. That means moving the switch away from the SD card pins and towards the back of the card. If the lock is damaged or loose, you may need to replace the SD card. To see what the lock looks like, see https://kb.sandisk.com/app/answers/detail/a_id/1102/~/sd%2Fsdhc%2Fsdxc-memory-card-is-write-protected-or-locked .

Sometimes, you need to use a computer to format the SD card. This can happen when the card was initially formatted to be used with a different device. Then return the card to the camera when the camera is off. Follow the steps to select the Custom setting and format the card again in the trail camera. See page 20 of the manual, https://www.stealthcam.com/wp-content/uploads/sites/2/2017/12/STC-G42NG-KPT.pdf . The last thing to try is a firmware update of the camera.

I hope this helps.

Cindy Wells

Cameras | Answered on Sep 20, 2020 | 24 views

Pleasse check if the camera of the video is turned off -
check the settings under my devices -

Cameras | Answered on Sep 01, 2020 | 17 views

Maybe it's just sulking - try taking it tea in bed tomorrow

Cameras | Answered on Aug 30, 2020 | 20 views

Where the manual suggests you insert it.

Cameras | Answered on Aug 30, 2020 | 17 views

This seems to be a manufacturing problem. When the disk is loaded it is centered on a spindle and to make sure that centering succeeds a magnet mounted to a small white rotating plastic piece on the top of the DVD drive. The magnet seems to bee too strong on my machine so the spindle isn't able to disengage when trying to open the tray. The result is blocking. It is of course possible that the electric motor moving the tray and the spindle movement is too weak. Anyhow this is how I solved the problem on my Philips Video/DVS DVDR3510V:
1) Disconnect the device from mains power.
2) Unscrew the eight screws holding the top in place.
3) Unscew four black screws keeping the DVD unit fixed to the main body.
4) Carefully drag the DVD slightly back which allows you to rotate it to point sideways (this allows simpler testing of the mechanical working).
5) Unscew the two blank screws keeping the front half of the top of the DVD unit in place.
6) Using a small screw driver carefully bend the clips to allow the top plate to be removed.
7) Connect the mains power and don't ouch anything inside.
8) After startup try Eject/Load several times to ensure that the DVD unit is mechanically working OK. If the Eject/Load doesnt work with the top off there is no use going further.
9) Disconnect mains power.
10) Use a small felt tipped pen to mark the face of the small metallic (magnet) part in the center of the white movable component fixed to the top.
11) Using a small flat screw driver carefully open the clips holding the two halves of the white component together. Careful! The clips may break easily.
12) Cut small pieces of tape (or use thick drawing paper). The idea is to lift the magnet slightly upwards. We thus use tape or paper as shims. Notice that a hole is needed in the center.
13) When the shims are in place put the magnet back oriented correctly (if you didn't mark it test it against the spindle rotating the disk. The correct orientation is where the magnetic force is strong.
14) Mount the halves back into the hole in the top component and align the clips. Then press the halves together until the clips connect.
15) Put the top component back and clip it into place. No need to screw in the screws yet.
16) Connect mains power, don't touch anything inside.
17) Check that the tray now opens both with a disk and when empty. Check that a DVD is recognized correctly (too little pressure leads to disk loading failure).
18) If the DVD unit now works assemble it and you are done.

The first picture shows the white round plastic part that is modified on the left hand side of picture.
The second picture shows an additional support I glued to the top with super glue because the top is fairly flexible. Initially I thought this was the reason why the spindle got stuck. I think the extra support is unnecessary but i didn't bother with removing it.

Cameras | Answered on Aug 20, 2020 | 1,438 views

Check your Internet bandwidth by using an online speed test, such as nperf,or and Speedtest, or Comparitech. Contact your corporate IT department to check your WiFi and internet hotspots. Turn off the group HD in your Account Management if your WiFI bandwidth is insufficient. Turn off your corporate VPN if it is not required for the meeting.

Cameras | Answered on Jul 22, 2020 | 287 views

You are shorting something inside the camera. This can even be a faulty SD card.
Battery problem: bad quality of the battery bring this challenges. It normally occurs when the battery has been user beyond its operation.

Cameras | Answered on Jul 12, 2020 | 39 views

Not finding what you are looking for?
FUJIFILM XP30GPS Digital Camera Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top FUJIFILM Cameras Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Brad Brown

Level 3 Expert

18562 Answers

Falling star

Level 2 Expert

217 Answers

Are you a FUJIFILM Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides