Top 20 FUJIFILM XP30GPS Digital Camera - Page 2 Questions & Answers

This means that the switch inside the camera that senses the SD card protection switch is bad or broken. Take the card out of the slot and look inside with a small light and check the side where the corresponding location for the switch is. See if there is a part missing or stuck. In most cases this is something you cannot repair yourself. You have to send the camera in

Why have you taken pictures of the camera ? Most people take photos with their cameras, not of them, except for insurance purposes.

• First, reset the camera to factory default settings. On most Fuji cameras like the X100T, XT1, and XT10, you'll press MENU > Go to setup 1 (the wrench with a "1" next to it) > and then click RESET > OK. Wait 30 seconds after the reset has finished.
• Turn the camera off
• Next, take the battery out of the camera and leave the battery out for a FULL 2 minutes
• Take the lens off and then replace it 3 times
• Turn the camera back on and cross your fingers!

If not successful rub the contacts gently with the erasure of a school-type pencil Make certain you have gone through the Menu and done a full Reset at the lowest possible level. Make certain you are using a incompatible SDHC card instead of an SD card. Spray some WD40 Contact cleaner onto a Qtip and gently rub the contacts. Most often that Error Code comes up after the lens has been extended against something, i.e. the camera was turned ON when something was in front of the lens, or it was still in camera case, or the lens was jarred. If it is malfunctioning after a mechanical insult such as being turned ON when was still in a case it may need repair. With many cameras with a lens that extends a vacuuming of the various lens barrels will dislodge lint or other foreign bodies that are causing a Lens Error.

Of course, you just need a piece of data recovery software. Try Cisdem Data Recovery: Step 1. Take out your sd card, then connect to your mac with a sd card reader; Step 2. Launch Cisdem Data Recovery, choose External Drive Recovery Step 3. Choose your sd card and click "Scan" Step 4. Preview files and select Step 5. Click "Recover" to get files back Best Way to Do SD Card Recovery on Mac 2018 Edition https://www.cisdem.com/data-recovery-mac.html

My camera flash isnt working i barley used it. The pictures are coming out black and I'm trying to fix it myself. The flash isnt coming on at all.

the background blurs when the aperture number is low (like 2.8 or so) one needs to either set the aperture priority such - and let the camera select the iso and the shutter speed - or go manual and set this yourself, considering the meter readings to get a balanced image.

Hello Edward.What mount does it use?Bayonet-type K-mount?Screw mount?Can you supply a photo or graphic of mount?

Appears that the lens is fubar. Try another lens to confirm.

I am indeed led to believe one exists, yes. What about it ?

Thanks for telling us

And if you do remove it, it is unlikely that you will have the equipment or the knowledge to fix the issue. Take it to a service centre.

The answer is probably in the manual

Find it on Google and download it - Fixya does not supply this.

'E' stands for error. Return camera for a replacement.

The camera is warning you that the shutter speed may be too slow for you to handhold the camera steady enough to prevent camera motion from blurring your photo. For full details refer to the "Warning Messages and Displays" section of the manual (page 113)

This is not a camera - it appears to be some kind of office equipment. Posting your query in a forum dealing with such items may help.

Use 2500 mAh re-chargeables, carry spares

Follow the link to your manual. https://www.fujifilmusa.com/shared/bin/S5000Manual.pdf

here you go https://www.fujifilmusa.com/shared/bin/S5000Manual.pdf

Try the Fuji support site