Top 20 Sharp FX Plus Questions & Answers

Make sure your APN settings match. Name: Straight Talk APN: tfdata Port: 80 MMSC: http://mms-tf.net MMS proxy: mms3.tracfone.com MMS port: 80

Sounds like the touch screen is dead, the crack most likely broke the touch screen sensor

How can i unlock my soft bank 003sh phone. I want to use it in philippines?

I please want to unlock my phone. I was asked to sign in with google account in order to unlock my phone. I have tried this to no avail

that means you ear piece is dead or its disconnected,you just need to open your phone and fix your ear peace or speaker

Has it found your network?

Cell Phone Keeps Shutting Off Vibrations on dirty battery contacts could be the cause of this problem. Remove the battery and clean the battery contacts with methylated spirits and the battery contacts in the cell phone.

Sometimes network problems make this,
other wise phones speakr problam.

I had the same problem. I bought two new batteries before I figured it out. The three brass connections on the phone that normally touch the battery tend to curl up after several battery pulls like a finger curls up into a fist. After you remove the battery, gently scrape the brass leads on the phone with your fingernail until they extend out onto the chrome area beneath. If it doesn't work then try again. The charging leads are not making the connection to the battery because they are bent or curled up into the phone.If it still doesn't work then there's something else wrong.

do factory reset.

i am receiving calls but i cant get into my phone it says draw pattern to unlock

Using an unlock screen is easy. Enter the code. but, there are two types of code, A Subscriber set pass code or A PUK Code, aka a SIM Lock Which do you have? Click Comment. ..

if this is the machine your talking about check out this link to the user manual it may have the answer. if not then you may have broken wire/s in that display. this user manual may have contact info in it so you might ask the mfg. about the issue. good luck. https://www.manualslib.com/manual/571166/Sharp-Fv-Db1e.html

You should take it to an authorized technical center. It look's like an protective mode. Maybe some electr?nico component inside it's broken...

It is very easy to do. You just follow these steps and that's it. * Go to settings * Go to the Privacy * Now you will see an option "Factory Data Reset" (Click on it) * Then Click on "Erase Everything" after that, your device will reboot itself and it will perform an operation which will reset your data from the factory.

do u mean hard reset google it it will show a few videos how to hard reset it

No, it uses a power adapter, available at below: http://www.calculatorsource.com/s-adapter.html You can also search out a printer ribbon for it. This handles 10 digit calculations.

What is a R5975a? it is listed in the cell phone category.

UX-P200 Operation Manual

put this in to google

Really? Are you sure that's the problem? There could be other issues. You should test the diode first. If you need the diode try buying it from AVNET.