20 Most Recent Kenwood KM200 Chef Food Processor - Page 7 Questions & Answers

i have the same problem. i bought a kenwood fp921
im sure about locking bowl and lid.
but the drive shaft is loose

Could you please email me a copy as well the service book

Hi,
They do not have a manual for the Kenwood Chef A701. However, there is a manual for a Kenwood Chef A701 available for download see www.kenwoodservice.co.uk/instructions/UK/instructions-A701.pdf. There is also some discussion on Martin Lewis' Money Saving Expert Forum see forums.moneysavingexpert.com, about instructions for the Kenwood Chef. I hope this is of some help to you.
Thank You.

we purchased a FP580 KENWOOD FOOD PROCESSOR. Not received any user guide or receipe cards. Dont know why

Just have to test some wires. May need to dry real good for a few more hours. Can try a hair dryer.

The problem is that the clutchdog, which is normally engaged by the peg on the liquidiser cover, is worn. Remove the top casing of the machine by removing the 3 screws and all of the outlet covers. Then unscrew the top of the gear box and prise open carefully with a screwdriver to expose the gears. The clutch dog can be unscrewed. Remove the spring that is on the outside of the gearbox and replace it on the inside of the gearbox so that it pulls the clutch dog down permanently. This then needs to be screwed back once the top of the gearbox has been screwed back together. Sounds complicated but it will be obvious when you try it. The machine will then turn the main attachment hub but will remain engaged as for later model machines. Hope this helps. John UK