20 Most Recent Daewoo DWD M1031 - Page 8 Questions & Answers

ie code can mean no water entering machine check water valves and filter or could be solenoid valve in machine faulty

could be the pump blocked..........just clean it out.......easy fix cheers

Check if there is power at the socket, or fuse may have been blown

There is no reset button, unplug the machine for 3 minutes to reset it.

replace the water shutoff solenoid valve assembly in the mean time when the machine is full turn the tap off change the hot water hose over to the cold water tap and use the hot water solenoid button

I do not believe that is a 1E I think it's an IE error code which would be water inlet wiring or something like that. Here is the code list, scroll down until you find IE, Daewoo errors start at E2, hope this helps. http://removeandreplace.com/2015/11/02/daewoo-washing-machine-error-fault-codes/

Water Inlet Error http://www.manualslib.com/manual/738148/Daewoo-Dwd-F1011.html?page=13 Good Luck

I hd zs problem before,no problems in z water outlet,z pump

Hassan... sorry to hear of your troubles, There are definite procedures for wet equipment handling! Immediately remove ALL POWER. (THE MORE IMMEDIATE the better the results). Open the equipment to the fullest extent possible... remove excess water.. and use compressed air to help move excessive moisture away. WD40 (water displacement) is an excellent product for this purpose. If the water was clean... allow the unit to air-dry TOTALLY before even thinking about restoring power. If dirty, muddy or corrosive... rinse the unit with fresh clean water... THEN proceed with the water removal... After several DAYS... carefully look into & around electrical connections for any signs of corrosion or electrolysis... Make an inventory of part to refurbish or replace. Many connectors can be cleaned with Isopropyl Alcohol & conditioned with an anti-corrosive (no-ox compound, white lithium or even petroleum jelly) re-connected, refitted & re-used... Other parts.... NOT-SO-MUCH... Everything must be completely ABSOLUTELY dry & re-assembled before attempting to restore power. Hope this helps... Yes entire telephone exchanges have been in mud slides, hosed off... properly dried & restored to service (honest... SxS CDO).