20 Most Recent Nokia X2 Mobile - Page 6 Questions & Answers

FORMAT

Just call to your sim card customer using another sim with the same network/operator.They will give you the PUK code and advise you how to do.Thanks for visiting fixya

Did you drop your phone to water ? If yes you need to clean up the phone.Most of this problem cause due to sort circuit of the camera (lens) or damage of camera.Open and unscrew the phone and remove the camera.Clean all the nearby components,camera connecting pin,camera and try it.I could not guarantee you that this will definitely solve your problem but sometimes this trick can fix if the problem is minor.Good luck

.Here is your firmware. X2 firmware Thanks for visiting fixya

There are two ways to do but there is no guarantee,,, first try to write Good PM file if not solve we need to check the hardware. For hardware follow this link Nokia X2-00 Network solution..Even if the problem still persist the last thing we need to do is to Re-ball CPU.Good lcuk

Hi to get rid of this problem you can unlock your Nokia by unlock codes..try Mobile-Unlocker.com and get restriction code and unlock your mobile so that you can use other provider's SIM in your unlocked Nokia..

to purchase the network unlock codes visit unlocking4u here they ask you the country name from where you brought your mobile and the network name to which your mobile is locekd .finally they will send you the codes to unlock your nokia x2-01 mobile.once your mobile get unlocked then it will be free to all network sim.

I know only paid unlocking service.Get the unlocking code from http://www.theunlockarena.com/ .They offer the service for your mobile at cheap price.Through this you an unlock your mobile easily.

PUK stands for Personal Unblocking Key. This is a uniqueeight-digit code specific to your SIM card. This is required when the PINnumber to unlock your mobile phone is entered incorrectly 3 times. You are thengiven 10 attempts to enter your PUK code. If an incorrect PUK code is enteredafter the 10th attempt, you will block your SIM card permanently and willrequire a new SIM card from your mobile phone provider.PUK codes can be obtained through the following ways -The PUK code is in your SIM card documentation Starter Pack.If you do not have this then -Please contact your phone service provider.Your cell phone service provider can give you the PUK code once you give themyour account details and they have confirmed your identity.For details to obtain the PUK code for the SIM card, pleaseclick on this link and follow my instructions.http://www.fixya.com/support/r5705889-puk_code

bluetooth not accept the songs in nokia x2

These directions are for an AT and T phone, but other than that, are the same for any carrier. A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your phone carrier to unlock your SIM card. You can obtain your phone's PUK code from your carrier in one of these ways: Log in to Your account.online Use a Technical Support Chat Contact your carriers Customer Care Get Your Phone's PUK Code Online Go to the Phone/Device page. From the My Phone/Device screen, select the Unblock SIM Card link under the My Make & Model heading. The Unblock SIM screen will display your PUK code and will give you instructions for unblocking your SIM Card. Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code. Note: If you enter the wrong PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator

first get the settings from network service provider save them then ... go to configuration in your settings menu first ....
then go to personal configuration there you create an account for web and activate it.
select the personal config option and
then put ur service provider settings as default in the next one
select them and put activate default in all applications
then restart and start using..

try code from service provider.