Top 20 TechnoMarine 111021 Watch Questions & Answers

Probably needs servicing at a watchmaker. The seals can jam and stop the clock as it were.

Yes, he should consult the support center, they will have a replacement for him, most especially if he still has warranty

https://cdn.technomarine.com/www/files/warranty-manual.pdf

try a watch repair or jeweler

take it back for a warranty inspection it could be a simple flat battery

Any place that sells or repairs watches will fit a new battery for you.

try this link for your batteryhttp://www.pmwf.com/Watches/QuartzWatchesAndBatteries.htm

More information required in order to give a solution

The crown has three positions:

Fully pushed in is the running position

Pull out to next position alows adjustment of the date

Pull out to third position allows adjustment of the time

Hope this helps.

www.technomarine.com

Jewel

Click on my profile (escapement), then click on Tips and Tricks. There you will find links to all watch manuals.Rate me, please.

i too am looking for replacement screw down crowns...were you able to find them?

That's right- your watch needs battery replacement. No matter you wear it every day or just once a year - battery life comes to an end in a two years time approximately. Expect the same all over and over again.
Rate me, plz.

Thats called an end piece. You can probably go to a reputable watch repair shop and find one. We keep those in stock. Never throw parts away cause someone will eventually need it!

You can take it to a reputable watchmaker (NOT a jeweler) and they should have no problem helping you with this problem. It might be that your watch isn't working because the second hand is stopping it from running. Have them CHECK your battery (opposed to just changing the battery) I bet the second hand is the reason your watch isn't working. If you have problems findind help PLEASE let me know, and I will be gald to assist you fher!

You can get the diamond bezel from your watch dealer.Just go to internet and surf for the dealers or you can use Googles to order diamond bezel online.

Hope it may helps you ;

Regards,
VOTIT

Question edited for clarity. Please don't type in all CAPS, it is considered SHOUTING and is harder to read especially in a jumble of words and numbers. 377, although a maker would be useful! https://www.google.com/search?q=battery+METAL+BEZEL+STAINLESS+STEEL+BACK+10%2F4312-13+75311+THAILAND+MOVT ..

https://www.fixya.com/support/r27181038-changing_watch_batteries Or risk it ..

Question edited for clarity. Armani and Emporio in wrong order. Quality Watch... Best advice https://www.fixya.com/support/r27181038-changing_watch_batteries The same as the one in it if it has one. Battery for Emporio Armani - GP A76 / LR44 / V13GA Coin cell (Amount 1)

Emporio Armani products - BatteryUpgrade

BatteryUpgrade https://www.batteryupgrade.com > ... > Emporio Armani .. If you got it on eBay, it is a Chinese copy https://www.google.com/search?q=Armani+Emporio+AR+0911 ..

1. Buttons on the Device: Look for any buttons on the device itself. Sometimes, there are buttons that allow you to navigate through menus and adjust settings directly on the device.
2. Trial and Error: Try pressing different buttons on the device to see if any of them bring up a menu for setting the time. Look for buttons labeled "Menu," "Setup," "Clock," or similar.
3. Long Press: Sometimes, pressing and holding certain buttons on the device can activate different functions. Try pressing and holding various buttons to see if it triggers a menu for setting the time.
4. Google Search: If you know the model number of your Ultech device, try searching online for the manual. Many manuals are available for download from manufacturer websites or other online sources.
5. Contact Manufacturer: If you're unable to find the manual online or if you're still having trouble setting the time, try reaching out to Ultech's customer support. They may be able to provide you with guidance on how to set the time on your device.
6. Replace Remote Batteries: If the remote isn't working, try replacing the batteries. Sometimes, a non-functional remote can be as simple as dead batteries.