Samsung CLP320 AllInOne Laser Printer - Answered Questions & Fixed issues
Samsung clp 320 'door open' problem
If the printer was just powered up and immediately gave the door open error, look for a paper jam. When this happened to me, that was the problem, even though it was saying that the problem was an open door.
How to reset cartridge
For an Epson printer I have, you can but a reset device to reset the chips on the cartridge. But for another printer from Epson it even does not exists. I never heard of chip resetters for a laser, so I'm afraid you can't reset the chip on your cartridge.
Reset printer 325
where abouts can i locate the waste toner bottle on this model i open the front and there is only room for the cartridges from what i can see. please help this simpleton
Head cleaning
Please don't try to clean the "head" A laser printer is a very delicate apparatus and can be dammaged very easy. The manual gives several reasons, why shadow's can apear. One is the paper could be to moist. You could see the manual (still online) to check what "shadow" is closest you what your machine produces. Maintanance starts at page 72 and is followed by trouble shooting, where you can see print errors.
Printing blank pages
Hi, it might be the laser head is faulty or hvps is faulty. Try do an test print from the printer by press and hold the buttun for 5 sec or so. If it doesn't print. Try to clean the laser head which is able to be found under the printer with 3 screw. Do not power on the printer and look at the laser head this might cause blindness. After clean place back the laser head and test print. If same issue, try with a new sets of toner. If this still don't work you have to engage an technicians to either replace the laser head or hvps.
Clp320 reset counter
If you are worried about opening the printer or welding, you can simply buy an easy reset chip from Amazon or eBay. No welding is required and the installation takes only 1 or 2 min. Just peel and stick the chip.Search for DRUM RESET CHIP or PEEL STICK DRUM RESET and you will find many premade reset chips. If you are familiar with soldering, you may buy a drum reset fuse only and save $$$.
WHY NEED TO REPLACE IMAGING UNIT IN CLP PRINTER SERIES 320
If you are worried about opening the printer or welding, you can simply buy an easy reset chip from Amazon or eBay. No welding is required and the installation takes only 1 or 2 min. Just peel and stick the chip.Search for DRUM RESET CHIP or PEEL STICK DRUM RESET and you will find many premade reset chips.
When i print red, i get pink
you might need to replace the laser cartrige, If its not that please tell me what you are trying to print (red picture or red text/writing)-DF
Samsung CLP-320 Laser printer On switching on
This is a overheating problem. First try this - Put astack/folded paper under the paper tray position (under the tray handle) -- tothe point that the printer weight actually sits on the folded paper instead ofon its actual foothold.
If theproblem still exists, then you may need to replace the fuser.
Hope this will help you. Good Luck.
Printer in error state
The Brother Printer In Error State Windows 10 is an error usually displayed when the printer is jammed, low in paper or ink, the cover is open, or the printer is not connected properly, etc. Here some applicable solutions to fix this error. Check all think that cause this Brother Printer In Error State Windows 10 Turn off the printer and check for a paper jam. Check if the printer is low on ink. If you are using a WiFi printer, turn on the WiFi of the printer and the modem router.
Solutions to Resolve Brother Printer In Error State Windows 10:-
1- Turn the Offline or Pause Printing Status of Brother Printer.
2- Restart Print Spooler to Resolve Brother Printer In Error State in windows 10.
3- Enable Automatic Updation Of Brother Printer Drivers.
4- Allow Plug and Play Detection to Resolve Printer in Error State.
5- Uninstall the Brother Printer and then Reinstall It Back to Your Computer or laptop.
If the problem continuous check this blog for a full solution with expert advice-
Brother Printer In Error State Windows 10
6/3/2020 10:19:39 AM •
Samsung CLP...
•
Answered
on Jun 03, 2020
•
331 views
Not finding what you are looking for?