20 Most Recent
GE AccessPoint Digital KeySafe 001847 - Page 3 Questions & Answers
How to reset the combination, GE Hide a Key
Step 1. With the cap closed, set the numbered dials to the combination line. The factory preset combination is "000".
Step 2. While maintaining the combination in place,
rotate the "RESET" dial indicator beneath the letters approximately 90
degrees to line-up with the combination line. If the correct combination
is not set, the "RESET" dial will not rotate.
Note: Using excessive force can damage the dials.
Step 3. Set the new combination while maintaining the position of the "RESET" dial.
Step 4. While maintaining the combination in place,
rotate the "RESET" dial back to the original position. The combination
has been changed.
I am getting an Expansion
There are modules that you can add to the system. What is the model of the system that you have and what add ons are present? One of those add ons is having a problem.
Our keypad for our alarm will not stop beeping.
Your alarm system has two power sources, a power transformer that is plugged into an electrical outlet and a backup battery that is located within the control panel box. If the battery is over five years old you will need to replace it. Open the box and you you will see the battery with a set of wires attached to it. Pull the wires off of the battery and take it to a local battery warehouse supply store. They will match it up with a new one. Plug the new battery into the system and your system should restore itself back to normal.
How do I get GE
Hi, these are usually available in a service manual, these may be obtained from the 'net, or by a direct approach to the manufacturer.
Use the exact make and model and the words service manual when doing a Goggle search. or make direct contact to he manufacturer.
I have GE NX-6 with
hi,
You have to check the fuse inside the system . If there is any power surge happened then there is a chance for fuse become faulty. As you mentioned it would be a power side problem. first of check the fuse inside the system. Also you have to check the 16.5V transformer which provides the working voltage to the sysatem when it is line. If need any more assistance from me then you can contact me through fixya. One more thing is if can add any picture of the cotrol panel circut board then it will be very helpfull.
ok
Not finding what you are looking for?