20 Most Recent Toshiba A45-S121 Notebook - Page 6 Questions & Answers

HI MARTYN,
Toshiba allow cheapo makes to use their brand name sometimes.

So if the player is not a genuine Toshiba then there is likely to be a remote hack on the net some where.

If it is a genuine Toshiba then there wont be a remote hack and you will need somebody like DVD Chips to send you a £20 remote that will hack it.

However - many Toshiba machines will not play NTSC discs at all when first set up.

Check out the Video setup menu and you will see a PAL/NTSC/AUTO option.

Tosh's I've seen are preset to PAL but unlike other players the Tosh will spit out any NTSC discs you try to play- set it to AUTO

Check that setting first just in case that is the only thing stopping it

Here's a Tosh hack to try


1. Press the Open button on your remote control to open the drive tray
2. Press the 2 button on your remote control
3. Press the 4 button on your remote control
4. Press the 0 button on your remote control
5. Press the 3 button on your remote control
6. Press the 9 button on your remote control
7. Press the 6 button on your remote control
8. Press the 0 button on your remote control
9. Press the Enter button on your remote control to change the region to 1 for region 1, 2 for region 2, and so on, or 9 for multi-region playback
10. Press the Open button on your remote control to close the drive tray
11. Power off the DVD player
12. Power on the DVD player

If the hack does work make sure the PAL/NTSC setting is on AUTO because R1 disc might still not play

Will any of these work? charger for toshiba PA3299u Google Search

Short the two pins for 5 seconds with screw driver and restart the laptop, before doing this remove the battery and adapter

the 2 big clues are , it is plastic wrapped, blue, yellow, purple, etc.and 2nd clue is soldered down and has no socket mounts at all as real PCs have.THE ML1220 COIN CELL IS BAD AND IS ON BOTTOM OF MOBO. 3VDC, AS THE MANUAL TOLD YOU, SOLDERING DOWN WRONG CELL HERE IT EXPLODESTHAT BE A QUOTE.IT IS IN FACT RE-CHARGEABLE.actual location varies, as A200 is only base series. the number and letters to the end tell what PC it really is and was not told by you.so answers can be wrong. lacking full service tag, shown Part number of PC.old Core2, PC 14 years old and with 965 lame chip set.all bad. all this, and lacks any futures.

rather than spending too much more time fiddling I'd simply Clean Reinstall the printer which always works, lasts longer and actually saves time: Power up the printer, if wired unplug it's USB cable from PC. Go to Settings>Apps>Apps and Features to find and Uninstall the printer software. Next type CMD in Start Search, right click Command Prompt result to Run as Admin, copy and paste in the following command and press Enter: printui/s/t2 (Note that there is one space before each forward slash). Open the Print Server properties, Remove the printer's drivers for this printer and for any other printers you don't use presently. Now type Control Panel in Start Search, open CP, choose Icon View. In Control Panel open Devices and Printers, right click the printer to delete the Printer and any scanner or fax of the same name. Restart PC. Go to the printer model's Support Downloads webpage to download and install the latest full software package. Now is also the time to check for any newer printer firmware to install which matters a lot. Extract Printer software, right click Setup file to Run as Administrator. Follow the setup screens closely as you install the software. For USB it should prompt when to plug in the printer. If you have further problems reply back with results of each step. I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it's resolved.

no habla.. english please

In Windows 7 How to Change Date and Time in Windows 7 In windows 8 Date and Time Change in Windows 8 and 8 1 Hope it helps.

The jumper must be shorted at the point of boot up, not before or after. Not easy to do.

If it behaves abnormally in standard operation but works correctly in safe mode, it's not a BIOS problem. In safe mode, many features are intentionally disabled; the purpose is to keep a broken feature from interfering with troubleshooting or fixing the system. Unless you must run a particular program that does not work with Windows 10 even in compatibility mode, I strongly recommend upgrading to Windows 10, keeping the computer physically disconnected from the Internet, or converting to a Linux operating system. Windows 7 no longer gets security updates from Microsoft, and is vulnerable to all sorts of malware. Your problem may be just that. You can try a malware removal program, if you can find one that works on Windows 7 and still gets updated on the latest definitions. That may fix the issue.

https://www.laptoppartsexpert.com/i-17821868-toshiba-satellite-m45-s2692-psm42u-75w-ac-adapter-replacement.html

i have a Toshiba satellite M105-S322 and all i had to do is open the ram compartment and pull up the plastic sticker or whatever you want to call it between the motherboard and the ram. There is a jumper called "CMOS_CLR1" use a screwdriver to short out the pins and it clears the CMOS.

Many sites seem to think this is it? https://drive.google.com/file/d/0B6IqcVTk0jpYY2VKSzRQOWRoTk0/view https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk02g_zHtTou52LFBcqMHGPCncJlHyA%3A1606502890799&ei=6knBX7qjMLKl5NoP08CJyA0&q=toshiba+satellite+P855-S5200+motherboard+schematic ..

U need cd key.check my previous solution

check your hard drive. is it connected or not. mostly it is observed that boot able device is not connected with computer or laptop. please check it.

How to Change the Boot Order for Toshiba Satellite Techwalla com

Point your mouse cursor on it, drag ( hold left click) move it to the top of the screen.
or you can try click setting >> auto hide checkbox

akee.4shared.com

If your laptop has TPM you won't be able to do a reset without a service center. It's part of keeping laptops secure.

Error Code 0xc0000185 regularly appears beside the report: The boot form data for your PC is missing or contains errors. Unhappily, if you unplug the USB devices from your Windows machine and reboot your operating system you will still keep getting this error code. Solutions of Error Code 0xc0000185:- 1: Reboot Your PC. 2: Repair the BCD with an Installation Media Disk. 3: Setup the Hard Drive. 4: Run CHKDSK. 5: System Restore. FULL Blog with Expert advice- Error Code 0xc0000185 Here is a way to fix any errors in Printer & Computer. Just follow the steps which are mention on the blog to fix the Error Code 0xc0000185 or Call us the number is given in Blog.

Reinstall the OS to factory reset!

Go to an expert