Toshiba Equium 100 PC Desktop - Page 6 - Answered Questions & Fixed issues

Short the two pins for 5 seconds with screw driver and restart the laptop, before doing this remove the battery and adapter

the 2 big clues are , it is plastic wrapped, blue, yellow, purple, etc.and 2nd clue is soldered down and has no socket mounts at all as real PCs have.THE ML1220 COIN CELL IS BAD AND IS ON BOTTOM OF MOBO. 3VDC, AS THE MANUAL TOLD YOU, SOLDERING DOWN WRONG CELL HERE IT EXPLODESTHAT BE A QUOTE.IT IS IN FACT RE-CHARGEABLE.actual location varies, as A200 is only base series. the number and letters to the end tell what PC it really is and was not told by you.so answers can be wrong. lacking full service tag, shown Part number of PC.old Core2, PC 14 years old and with 965 lame chip set.all bad. all this, and lacks any futures.

rather than spending too much more time fiddling I'd simply Clean Reinstall the printer which always works, lasts longer and actually saves time: Power up the printer, if wired unplug it's USB cable from PC. Go to Settings>Apps>Apps and Features to find and Uninstall the printer software. Next type CMD in Start Search, right click Command Prompt result to Run as Admin, copy and paste in the following command and press Enter: printui/s/t2 (Note that there is one space before each forward slash). Open the Print Server properties, Remove the printer's drivers for this printer and for any other printers you don't use presently. Now type Control Panel in Start Search, open CP, choose Icon View. In Control Panel open Devices and Printers, right click the printer to delete the Printer and any scanner or fax of the same name. Restart PC. Go to the printer model's Support Downloads webpage to download and install the latest full software package. Now is also the time to check for any newer printer firmware to install which matters a lot. Extract Printer software, right click Setup file to Run as Administrator. Follow the setup screens closely as you install the software. For USB it should prompt when to plug in the printer. If you have further problems reply back with results of each step. I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it's resolved.

no habla.. english please

In Windows 7 How to Change Date and Time in Windows 7 In windows 8 Date and Time Change in Windows 8 and 8 1 Hope it helps.

If it behaves abnormally in standard operation but works correctly in safe mode, it's not a BIOS problem. In safe mode, many features are intentionally disabled; the purpose is to keep a broken feature from interfering with troubleshooting or fixing the system. Unless you must run a particular program that does not work with Windows 10 even in compatibility mode, I strongly recommend upgrading to Windows 10, keeping the computer physically disconnected from the Internet, or converting to a Linux operating system. Windows 7 no longer gets security updates from Microsoft, and is vulnerable to all sorts of malware. Your problem may be just that. You can try a malware removal program, if you can find one that works on Windows 7 and still gets updated on the latest definitions. That may fix the issue.

The jumper must be shorted at the point of boot up, not before or after. Not easy to do.

https://www.laptoppartsexpert.com/i-17821868-toshiba-satellite-m45-s2692-psm42u-75w-ac-adapter-replacement.html

Hi , Please follow the below steps -start menu -control panel -language -add a language -select language English -Open Button -Select the English region you want -Add Button

Many sites seem to think this is it? https://drive.google.com/file/d/0B6IqcVTk0jpYY2VKSzRQOWRoTk0/view https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk02g_zHtTou52LFBcqMHGPCncJlHyA%3A1606502890799&ei=6knBX7qjMLKl5NoP08CJyA0&q=toshiba+satellite+P855-S5200+motherboard+schematic ..

check your hard drive. is it connected or not. mostly it is observed that boot able device is not connected with computer or laptop. please check it.

If your laptop has TPM you won't be able to do a reset without a service center. It's part of keeping laptops secure.

Error Code 0xc0000185 regularly appears beside the report: The boot form data for your PC is missing or contains errors. Unhappily, if you unplug the USB devices from your Windows machine and reboot your operating system you will still keep getting this error code. Solutions of Error Code 0xc0000185:- 1: Reboot Your PC. 2: Repair the BCD with an Installation Media Disk. 3: Setup the Hard Drive. 4: Run CHKDSK. 5: System Restore. FULL Blog with Expert advice- Error Code 0xc0000185 Here is a way to fix any errors in Printer & Computer. Just follow the steps which are mention on the blog to fix the Error Code 0xc0000185 or Call us the number is given in Blog.

Go to an expert

no oS stated.no THING stated, is it a MP4 movie ( nasty?) or what?load VLC player, free , google it , from france. safe and free.the load your video gpu driver next from toshiba.no browser stated if downloading with one nor if all things fail downloaded, say a simple photo like JPG downloaded fails.we can't guess what fails, not here.

Sounds like fluid got splashed on keypad area. What is make and model of laptop?

Reinstall the OS to factory reset!

Flashing blue light means it is working! solid blue light means it is not working! no light means its not on!

https://www.youtube.com/watch?v=5yRQejXvi9M https://translate.google.com ¿C?mo hago para que mi computadora port?til Toshiba arranque desde USB? Para arrancar esta unidad despu?s de muchas horas de intentarlo, lamentablemente solo por un error: 1.¡Reinicie su BIOS a la configuraci?n predeterminada! 2. Deje Secureboot activado. 3. Desactive Fastboot. 4. Guarde la configuraci?n con F10. 5. Mantenga presionado F12 mientras inicia para acceder al men? de inicio y seleccione su USB. 6. ¡Deber?a arrancar! Toshiba C?mo: configurar la prioridad de arranque del sistema en BIOS

The possibilities are too many for turning off itself. 1) It could be a heat issue with the TV set 2) It could be a software issue with the TV set, for example energy saving settings or active stand by mode. 3) It could be a timer set up in the TV set menu. 4) It could be a faulty power supply. 5) It could be a very unstable mains supply (not very likely, but possible) You can check the user manual for information about +"TV power on control (Active Standby)"+ Sometimes the LED's on the front of the TV may indicate "the issue": Just reset the network and try for WIFI issue: To connect to a wireless network, perform the following:

1. Press the "Setup" button on the remote.
2. Use the up/down arrows to select "Network".
3. Use the left/right arrow buttons to enter "Network Setup" and change the settings from "Wired" to "Wireless" if necessary.
4. Select "Wireless Setup" and choose "Assisted Setup" from the available options and press the "OK" button on the remote.
5. A list of available wireless networks will display, select the one you wish to connect to and press "OK".
6. Select "Security Key" from available options and press "OK".
7. Enter the network password for the wireless network you are connecting to.
8. Once the correct password is entered, select "Done" and press "OK".
9. Select "Done" again when prompted on the next screen and press "OK".
10. The TV will connect to the network.
11. Once connected, the screen will return to the "Network" menu.
12. To perform a network connection test, go to the "Network Setup" menu and select "Network Connection Test" to verify the connection.